Recent content by 30th6

My pto wont shut off on my 4035. I hooked up my bush hog today, it's the first thing I've hooked to the pto. No matter if the clutch is engaged, both switches are off, I even pulled the fuse, the pto is running full speed . I tried it use the bush hog to break it loose if it was just stuck by...

Ok thanks I've been pulling my hair out for two days trying to make sense, I actually ordered a power beyond sleeve yesterday because I've tried every other option lol

So that's where the factory power beyond hose goes? It has pressure all the time with the loader valve in neutral just like the two pressure ports and the return. I'm ignorant on the power beyond, what about that port makes a difference in how it operates? If I add a 3rd function kit where would...

I put a new loader valve on my 4035 and I'm not sure I have the power beyond hose hooked up in the right spot. The loader or 3 point don't work until I put the hydraulic lever beside the seat either forward or back and move the loader valve back. The hydraulic lever beside the seat will not do...

So my loader valve/ spool valve is bad and bypassing for the tilt. I'm not going back with the original cable garbage that it came with. I'm running hydraulic hoses to a regular loader valve. What loader valve would you recommend as far a gph/flow or brand? So this is just a rant/question about...

I know they flow without being hooked up to the valve but never thought about the pressure when they are all hooked together. I will try that this evening and report back thanks.

I have unhooked and reattached all of the connections, even unhooked the return at the spool valve. All the hoses flow through the FIL fine. The FIL will start to dump, it will move down about 2 inches and then it bogs the engine down and the hose I just replaced flexes where all the pressure...

Is there any check balls that I may of lost when pulling the valve apart?

I have a issue with my loader not dumping. The curl/dump has always stuck so I would have to wiggle the joy stick to get it back to neutral. I bought the tractor from my FIL and he bought it new currently it has about 150 hours. The hydraulic on the fel has always seemed weak because it...