LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,562
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Dennis, I am exceptionally envious that you got to spread some gravel...... looks great!
I will have to get some more gravel, the 'turn around' section that I did is still a bit too small.... the car-- no problem.... the truck--- still needs another 3 ft.
Drew, what about any RV place? They should have an adapter..... but....
Bill, welcome home! I don't blame you one bit to finally give up the driving. Lots of crazy cagers out there!
Thomas, I hope your leg is feeling better! We definitely don't bounce like we used to.....
Got a little bit done on the addition and covered porch. Beam is tied in and ready for rafters / purlins. Hopefully get them done tomorrow and the metal roof done Sat.

It's strange to me to keep jumping back and forth on different aspects of the build....
Need to get the roof on the deck area so I can cut into the wall to remove the existing "bump out". Need to have it somewhat out of the weather. I also need the window out of the bump out to fill the hole waiting for it in the new wall..... then I can do the siding.....
At least the weather is nice. Sunny, low to mid 70's, crisp mornings around 38°. And... I hate to say it... no rain!
Everbody have a great evening!
I will have to get some more gravel, the 'turn around' section that I did is still a bit too small.... the car-- no problem.... the truck--- still needs another 3 ft.
Drew, what about any RV place? They should have an adapter..... but....
Bill, welcome home! I don't blame you one bit to finally give up the driving. Lots of crazy cagers out there!
Thomas, I hope your leg is feeling better! We definitely don't bounce like we used to.....
Got a little bit done on the addition and covered porch. Beam is tied in and ready for rafters / purlins. Hopefully get them done tomorrow and the metal roof done Sat.

It's strange to me to keep jumping back and forth on different aspects of the build....
Need to get the roof on the deck area so I can cut into the wall to remove the existing "bump out". Need to have it somewhat out of the weather. I also need the window out of the bump out to fill the hole waiting for it in the new wall..... then I can do the siding.....
At least the weather is nice. Sunny, low to mid 70's, crisp mornings around 38°. And... I hate to say it... no rain!
Everbody have a great evening!