36F and cloudy @ 10:30, heading up to a high of around 48F with showers moving in later this evening. Calling for a high of 63F tomorrow but with rain accompanied by high winds.
Ten Day looking good though with lots of highs in the 40's and 50's ...
Went to bed fairly early, slept well, got up around 06:30.
Went back up to the shop before I hit the rack though to shut things down.
Safety Kleen drum as I started to clean it off:
Will be interesting to see how well it cleans up with a coat of fresh paint on it.
Got the holes for the mounting/hold down bolts for the Dust Deputy drilled out in the lid while I was up there:
Still need to deburr.
Next weeks's meds doled out.
As far as the agenda for the rest of the day goes:
Hopper and deer feeders need refilled.
Need to run down to the corner and pick up another 5 gallons of diesel for the torpedo heater.
Might sneak over to the barn and see what other plywood can be scavenged now that the garage is a little less cluttered and I have some place to put it.
Need to cut up the 2 x 4's for the saw horses. Think I'll cut two sets of legs - one for a lower table height of 23" and another taller set.
Still have to clean up the drill guide and get that sliding smooth.
Would like to get back up to the shop and get some time in on the drum for the dust collection system but sure that will happen.
Amazon says the lift for the router table and the MicroJig dovetail starter system is "out for delivery".
Hope everyone has a great Wednesday ...
