Good morning!!!!

   / Good morning!!!! #121,151  
Good morning, low 18°F and high 39. Wind ESE 4 mph. 30% chance of showers.

Another shopping trip this morning, then help a friend with slow leak problems with her tires.

A phone call yesterday netted me my pork and beef orders. I'll pick them up on Tuesday. 2.5 hour trip each way.

Ron, nice shot of the tree rat.

Covid cases in Parry Sound/North Bay health districts: 0


Have a safe and healthy day all
 
   / Good morning!!!! #121,152  
Good morning! 39˚F heading to the mid 60s clear skies.

You can always tell the immigrants from the North that come to Texas - they were shorts years round.

OK Eric I give up what am I looking at in your pic for the morning. Is that some sort of green slab with the scattered leaves? Without the leaves it looks like kale jerky.

Kyle, I guess you will have to request a Steiner section on TBN so you can post all the details of you renovation project.

I come from North Carolina and I’ve always worn shorts 7-8 months a year. But if I could wear them year around, I would.
 
   / Good morning!!!! #121,153  
An addition to my weather station. The extra rain gauge serves 2 purposes, to accurately measure rainfall when there is very light rain and when there is a power failure longer than the battery last in my UPS. (Also to verify accuracy.)View attachment 674935
They both measures 100th Inch of rain

That’s a nice setup to cross reference accuracy. I thought they all measured in .00, both of mine have. I have an old fill and dump rain gauge and it virtually always reads the same as the flow meter unit on my weather station.
 
   / Good morning!!!! #121,154  
I assume Walmart is doing that nationwide, but the news media here mentioned that you can still buy a gun there; just that an employee will have to go get it from the store room instead of them being displayed. Since I don't need any more guns, I haven't verified that.:laughing: But I clean and oil my guns once a month anyway, so I did that this morning.

I read yesterday that Walmart reversed policy and is going to put guns back out.
 
   / Good morning!!!! #121,155  
Ron,
Prayers for your son. Is this the one in NC?
 
   / Good morning!!!! #121,156  
That is one nice guitar. Filling a "sonic Hole" sounds good to me. I passed on an auction for a rough cello. I was going to surprise my daughter. She would have to learn via youtube if I bought one.



Looking better by the day. You deserve a break today. Does the boss pay you overtime on the weekends?


Got a lot done today. The GT80 yamaha is running, but because I had to put an oversize carb on it (no stock ones available), it needs smaller mainjets and possibly pilot jet. Needs a few other things. I had to take both side covers back off the engine to adjust the clutch. I believed the plates might be stuck, but they weren't. Ended up being the "missing ball bearing" between the actuating shafts, and some extra tweak adjustments. (I didn't put this engine together initially.)

While adjusting the clutch, my wife came and told me our 10 yo son may have broken his finger at school in his physical education class. We whisked him to the local first aid care center. It's not broken, but pulled some ligaments. They put a splint and ace type bandage on it.

Back to work, so he watched me finish up the yamaha. And I would explain what I was doing and made him pay attention to key details.

Steiner sitrep: The motor is not locked up. I was able to rock the front pulley back and forth. Next worry is the radiator is fairly low. If motor overheated, and cracked the head, it could cause coolant loss. Left a message on the Steiner website to help me get manuals. Found a parts manual online. I really need a service manual. But, this thing is built from an industrial standpoint, meaning fairly simple engineering with common available components. I spent an hour or more unstrapping it from the haul, and getting the mower deck unattached. I think I'll leave it on the trailer for now until I find room in the barn to work on it. Anyone have a huge diptank of Kroil? It suffers from FeO2 cancer in many spots, but mostly aethetic spots. It seems everywhere important is heavy duty steel in decent shape. My daughter says its ugly. haha I asked "The shape, or the patina?" She said the shape. The thing is big, and heavy. I spent another hour with an oil can pump, putting drops of oil on all the fasteners I could reach. They are quite rusted too. There are a LOT of hydraulic hoses, and I found one that looks blown. Could it be the cause of it getting parked? Time will tell. Still assessing things.

Ferrous oxide is a fancy name for rust! LOL
 
   / Good morning!!!! #121,157  
RIP Sean Connery
one of my favorite actors

just finished bagging up underwear and socks to give to local charity, can't understand how I wound up with so much...think my late wife
just kept giving me stuff for birthdays and Christmas. Have an entire drawer full of underwear, another of socks, no need for more, time to give it to someone
who really needs it.

beautiful blue sky day but chilly at 38 degrees
 
   / Good morning!!!! #121,158  
Going to put my weather station up today, need to figure out where to mount it so wind is not blocked by building, probably on roof of garage.

.

Thanks for the link in weather station, even if my click on it took me to eBay for something else. Got mine set up yesterday but is in garage. Trying to decide where to put it. I want it accessible for cleaning, so not too high. Need it away from house. Not under trees, not on east side of house where wind is blocked. Hard decision. Should plant a post in yard. I found an old dish mount bracket to use. Saving stuff paid off again.
Mine is on ambient weather and wunderground.
 
   / Good morning!!!! #121,159  
Ron, prayers for your son.

RNG, sorry your trip went sour.

Great moonset this morning while I was watching 3 deer heading to bed, and a flock of geese heading to breakfast. While I was observing all of this, watched frost form - changing from a few patches to entirely cover the roof. None on ground. This is our 4th frost this fall like this. Since the first one was over a month ago, it seems to have confused some plants...we have some fresh lilac and forsythia blooms.
 
   / Good morning!!!! #121,160  
40F and quite sunny @ 11:00, overnight low hit 29.8F ... so we've had our first hard freeze apparently.

Squeak still wanting to go out in garage ... but sure doesn't want to stay long ... :laughing:

High will only reach in the neighborhood of 49F today. Might be somewhat tolerable outside with the sun.

Calling for rain/snow/wind tomorrow ... :eek:

Made run to TSC and Menards and picked up orders yesterday, also swung by NAPA and picked up the anti-freeze for the Sprinter.

Dropped off replacement pump and new brush for parts washer at the shop on my way out, dropped grease from TSC and put antifreeze in Sprinter on way back in.

Scheduled softener salt delivery for Monday.

On agenda for today:

Load cracked corn, whole corn, and nyjer in loader bucket and move around to basement and get it inside.

Refill bird feeders.

Cut boards for roost boxes.

Start gluing and screwing squirrel feeders together.

Put up bird bath.

More cleaning/straightening up in basement.

Hope everyone has an enjoyable, productive, and safe day ... :thumbsup:
 

Tractor & Equipment Auctions

UNUSED FUTURE 71" CLIP ON FORK EXTENSIONS - PAIR (A51244)
UNUSED FUTURE 71"...
2015 Acura MDX SUV (A50324)
2015 Acura MDX SUV...
2021 CATERPILLAR 303E CR EXCAVATOR (A51242)
2021 CATERPILLAR...
2019 FORD F-150 XL SINGLE CAB TRUCK (A51406)
2019 FORD F-150 XL...
2012 Freightliner Cascadia 113 Semi (A50514)
2012 Freightliner...
1996 Elgin Pelican Series S Street Sweeper (A50322)
1996 Elgin Pelican...
 
Top