Good morning!!!!

   / Good morning!!!! #64,391  
Kyle,

I like it ... looks like it would keep one's feet warm on cold day ... :thumbsup:
 
   / Good morning!!!! #64,392  
Kyle,

I like it ... looks like it would keep one's feet warm on cold day ... :thumbsup:

Thanks. Now if I can get offline and go cut some firewood. How many times does firewood warm you before you even light it on fire??? :)
 
   / Good morning!!!! #64,393  
Thanks. Now if I can get offline and go cut some firewood. How many times does firewood warm you before you even light it on fire??? :)

4 times at least and don't forget hauling the ashes.
1st, cut the tree down
2nd, buck it up
3rd, split the bucked blocks
4th, haul it to the stove
5th, burn it
6th, haul the ashes.
That is assuming you don't pile it.
 
Last edited:
   / Good morning!!!! #64,394  
Got the new speedqueen washer installed today. Used tractor and pallet forks to unload from truck and haul around to basement door. Old shutoff valves started leaking real bad after turning it back on, so ran to lowes for a couple ball valve bibs. So much nicer.
 
   / Good morning!!!! #64,395  
Thanks. Now if I can get offline and go cut some firewood. How many times does firewood warm you before you even light it on fire??? :)

Depends on when you do it:

Summer ... too many.

Winter ... not enough.

 
   / Good morning!!!! #64,396  
Good evening all. 53F this morning, overcast and wind picking up. High temp 65F, wind gust over 20 from south and overcast most of the day. Went fishing on the lake, with 2 others, they caught 4 fish , I let one get away :(. Went to Veterans day dinner, lot of people served in the area.

Thank you veterans for your service :drink:
 
   / Good morning!!!! #64,397  
Just came down from the shop.

Spent all day up there cleaning and straightening up ... made a surprising amount of progress. Still a long ways to go though.

A lot of it will be organizing. A lot of junk and scrap to get rid of ... probably time to make a run to the scrapyard.

Did finally get that frame for the LPGS moved up onto the welding table.

Also ran the box blade over the ruts someone left me in the wood storage area. Better, but not completely fixed yet.
 
   / Good morning!!!! #64,398  
Dat is behoorlijk sneeuw. Stuur svp naar Texas!

You can have it ... we had about 18 inches in one 48 hr snowfall. A bit much. Not sure why the photos went sideways (they weren't posted that way) ... it was about -15 C (or 5 F) and I wear shorts all year long (easier getting dressed after a MVA injury a few years ago) ... cold - ugh.
 
   / Good morning!!!! #64,399  
Good morning all. The weather is not great, but who cares when there is some left over pizza in the fridge. This is a rare event and would pose something of a dilemma - to sneak a piece before or after breakfast cereals - but with Julie away at a crafting weekend I guess I can even share an extra slice with Max too.

Eric, for 50 pages of instructions, complete 1 page per day and you'll be finished before 2018!
You are a genius Wng. I was a little concerned I wouldn't finish the framework today because of the forecasted rain, now it's great to realise that even with yesterday's late start, I don't need to do any more for a couple of weeks. If I send you Julie's mobile number, would you do me a little favour and give her the good news about the new schedule, before she gets back ? :)
 
   / Good morning!!!! #64,400  
Good morning all, 27 going to 47 and mostly cloudy. 60% chance of light rain tonight. Got the shop cleaned up yesterday and broke down the styrofoam packing from the dust collector and the boxes ready for trash day. Will take it easy today.

Randy, thanks for the info, already thinking, rain tonight, higher humidity, not as cold. Praying.

Drew, how is the mouth? Praying it will be much better.

Don, if she is texting you got it. She will likely do fine.

Eric, Good luck on the new plan. :D

Here is a late Thank You to the Vets.

Have a great day. Ed
 

Tractor & Equipment Auctions

2022 JOHN DEERE 330G SKID STEER (A52705)
2022 JOHN DEERE...
CAT EXCAVATOR BUCKET (A55745)
CAT EXCAVATOR...
2008 Ford F-450 Crew Cab Service Truck (A55973)
2008 Ford F-450...
Link-Belt 75X3 (A53314)
Link-Belt 75X3...
2015 DRAGON  130BBL VACUUM TRAILER (A55745)
2015 DRAGON...
Year: 2007 Make: Ford Model: Explorer Vehicle Type: Multipurpose Vehicle (MPV) Mileage: Plate: Body (A55788)
Year: 2007 Make...
 
Top