Good morning!!!!

[Looking4new]

Right now it is zero and going to a high of 39F.
Time to fire up the tractor and move snow and ice again. This is the hard part now, mostly ice.

Happy St. Patricks' Day!

 

[Buppies]

26 high of 51 later rain moves in tonight thru mid morning Saturday

 

[buckeyefarmer]

Only have 3rd function in my L40, and bought it that way. Can show pic later. Has a button on the joystick. I want a grapple also.

 

[daugen]

28 degrees going to 56 today, warming up a bit, with rain coming in tonight and pretty much on and off all weekend.
We can use the rain; the last one was over two inches, close to three on one rain gauge,
and it was absorbed very quickly. This area has been low on rain since October

 

[bakerg]

HAPPY ST. PATRICK'S DAY

 

[txdon]

Getting serious about installing a 3rd function and buying a grapple...have lots more clearing to do. Don, good timing on seeing your grapple pix. If you get a chance, I'd be interested in a photo of how your 3rd function valve is attached to your tractor (same request for buckeye, since you both have L30 series tractors).

I connect the hydraulics for the grapple to my rear remotes. I have two lines that stay on the tractor from the rear to the FEL.

Good morning! 67˚ heading to 82˚ windy from gulf of Mexico. One more work day at Dads doing repairs to his cow pen and road.

 

[ronjhall]

Drinking first cup of coffee. 67° with clear skies this morning. Heading to 92° with mostly sunny skies. Got a few small projects do before heat settled in. Then some patio time. Same plans for today.
RS, glad to hear from you. Nice fish pictures.
Drew, had a big willow in our backyard 40 years ago. Trunk was over 4' around. It's roots were in everything. Leaves and branches always on the ground. Best thing we did was cut it down. Do miss the shade it provided.
Good Morning All.

 

[RedNeckGeek]

If you get a chance, I'd be interested in a photo of how your 3rd function valve is attached to your tractor (same request for buckeye, since you both have L30 series tractors). RS, how's your grapple doing...such an impressive project you accomplished.

Kubota sells a kit for the L series tractors that provides either 3rd function or power beyond (I keep getting them mixed up, but it's what I used for the 4-in-1 bucket on my L3240). See my sig for a link.

RNG, is that torque wrench really gonna cost $2,700 after 18 payments? I need two!

Nah, just $500 for the torque wrench. He'd already run up a balance for a bunch of other stuff.:confused2:

 

[RedNeckGeek]

Good Morning! 53F @ 7:00AM. Mainly sunny to start, then a few afternoon clouds. High near 70F. Winds S at 5 to 10 mph.

Off to the mechanic's this morning to do some electrical work on the headlights and attach the fiberglass luggage rack to the roof. I'll also soda blast the intake manifold if he's gathered up the other stuff he wants blasted at the same time. Any time left will be spent installing door gaskets, but it's unlikely I'll get that far as I want to get home before the St. Paddy's Day drunks take to the highways.

TGIF gang!

 

[Thomas]

26 high of 51 later rain moves in tonight thru mid morning Saturday

.................................................
What do you think...no more heavy snow falls so I can remove plow from tractor until next winter?