Let's see your Kubota

[riptides]

Here are some working pictures from about two years ago...

 

[dass]

2011 B2710

 

[MaineMark]

B2620 moving snow.

 

[mike69440]

Selling my trusty little Bota. I'm experiencing seller's remorse even before being sold! But she needs a better home, as I work her too hard.

Kubota B7200D 4x4 With loader

 

[grnmtnboys]

First run down the driveway after she was dropped off yesterday afternoon... even have the hat on:

 

[Grateful11]

Wife and son decided to go with an MX5100 over MX5200, EGR but no DPF, had go 3 hours east to find one. It has the newer loader model. Wife wanted the grapple, what a woman. The 60" grapple bucket is considered light duty, doesn't look very light duty to me. Probably going to need more ballast than just loaded tries :wink:

 

[BXman98]

This is my Kubota BX2370 lifting up our 7x10 ft trailer along with the BX mid mount mower on it along with our fifth wheel hitch on the trailer.

 

[BXman98]

View attachment 417105


This is my Kubota BX2370 lifting up our 7x10 ft trailer along with the BX mid mount mower on it along with our fifth wheel hitch on the trailer.

 

[Kanook]

View attachment 4166052011 B2710

dass.......I notice that the bayonette hitch for the blade/blower is still installed while the loader is attached...Other than hanging out there low to the ground, does it interfere with the loader operation at all?

 

[Kanook]

View attachment 4166052011 B2710

dass.......I notice that the bayonette hitch for the blade/blower is still installed while the loader is attached...Other than hanging out there low to the ground, does it interfere with the loader operation at all?

 

[Jbuice123]

Spring driveway repair with my B2620

 

[Mike from MI]

First picture just after delivered second picture when I figured out why my wife was so willing to let me purchase my first tractor.

 

[landedakioti]

L4060

 

[Thomas]

Landedakioti.
Doe you have much of problem getting R4's to bit for traction as is?...#2 pics.

 

[landedakioti]

Landedakioti. Doe you have much of problem getting R4's to bit for traction as is?...#2 pics.

The only time had a issue was on ice. Plain on getting chains for next year

 

[wmonroe]

Wife and son decided to go with an MX5100 over MX5200, EGR but no DPF, had go 3 hours east to find one. It has the newer loader model. Wife wanted the grapple, what a woman. The 60" grapple bucket is considered light duty, doesn't look very light duty to me. Probably going to need more ballast than just loaded tries :wink:

Nice setup getting the 5100 but with the new loader. Is that some old red iron I see hiding behind the Kubota?

 

[Daver1963]

L2800 sitting in the carport after doing some spring plowing.
It was pulling a 2X12 plow about 9 inches deep at some points.

 

[TomSeller]

L2800 sitting in the carport after doing some spring plowing.
It was pulling a 2X12 plow about 9 inches deep at some points.

That is a pretty dang good depth for that tractor and R4s. Very nice.

 

[Grateful11]

Nice setup getting the 5100 but with the new loader. Is that some old red iron I see hiding behind the Kubota?

Yea that would be an IH 686 with an M&W turbo putting out 106hp.

 

[Grateful11]

Double post, sorry.