TYM TYM273 Discussions

Here are the most recent TYM273 topics from our community.
  1. K

    TYM 273 LJ200 loader

    Hi all, it has been some time since I posted anything. I lost a pivot pin on my LJ200 loader (lower most front). I can not seem to find a P/N anywhere on the web. Does anyone know of a good dealer...
  2. T

    Hydraulic leak Tym 273

    I have a significant leak of hydraulic fluid.. it appears to be from near the adaptor plate at the rear of the torque converter. Has anyone had a similar problem? If so how did you fix it? Had...
  3. Kubotasrking

    TYM 273 PTO Power Loss

    Hello TYM owners. Bought a used TYM 273 a year or so ago with some cool attachments to add to my existing NH collection. I started using it to chip some willow limbs a couple weeks ago and started...
  4. L

    TYM 273 Blown fuse when Key releases to 'on' position - runs if key in Start position

    Purchased TYM 273 in 2008. We have been maintaining (including having the frame welded when it split in two - seriously!) The issue is that when the key is turned to 'start' the tractor starts...
  5. R

    TYM 273 Seat Replacement

    Hi, I've never posted on this forum but I've used it extensively to diagnose and repair my TYM. So this will be my chance to give back a little. :) I have a 2008 273 that I purchased new, but...
  6. K

    TYM 273 loader valve

    My joystick will not advance the lift portion of the loader valve. The tilt portion is operational. Anyone have or know where I can get an exploded parts diagram of the valve. I'd like to know...
  7. A

    Tym 273 pto wont stay engaged

    Hey all, I have a tym 273. I am having trouble with pto. I engage lever to on and when I press the engage button on dash it lights up and pto spins but won't stay on. As soon as I release...
  8. A

    Tym 273 hst frame repair cracked at fel mount

    Hi, I had my frame crack on right side when fel attaches to frame. Right at the bolts. I saw a few other post about it. Does anyone have any pictures of the repairs they made? I welded...
  9. J

    Removing TYM 273 steering wheel

    Have a leak and need to remove steering wheel. removed cover and retaining nut now?
  10. C

    Oil & Fuel TYM 273 ran out of deisel now won't start

    .. well starts and chugs a bit then cuts out. Is there some priming pump I can muck with? Thanks for any help Chris
  11. K

    TYM 273 Front drive shaft

    I had my transmission to HST drive shaft go a while back and replaced it with the newer style. Now after pushing RI snow all winter my front drive shaft appears to be shot. I did not remove the...
  12. B

    HST Fluid coming out of transmission filler plug - TYM 273

    I have a TYM 273 with mid mounted mower (TYM). Tractor has done 700 hrs and bought 3 mths ago s/h. The more I use it the more it leaks HST oil from the filler/breather at the top of the...
  13. P

    tym 273 overheating ......help!!!!

    Hey guys first off I'm new to the site just wanted to say thanks for the help in advance. Ok just purchased tym 273.... After it warms up the gauge keeps Climbing until I stop working it and...
  14. C

    TYM 273 power loss

    Hauling buckets of gravel out of my gully today and the tractor would barely get up the hill out of the bottom. Have gone up the same hill for a couple of years with no problem. Full throttle and...
  15. S

    TYM 273 Replacement Battey

    Hi all, I have a TYM 273, great little tractor, that I need to replace the battery in. The battery measures approximately 7" wide by 5" deep by 8" high, I have looked in all of the normal...
  16. D

    Tym 273 glow plugs

    Does anyone know what the part # for the glow plugs on the Mitsubishi s3l motor used by TYM? I can't find it listed in any catalogs. I would like to buy it threw my local napa store. Thanks in...
  17. M

    TYM 273 GLOW PLUGS

    I am having a problem with my glow pugs burning up and the dealer tells me he doesn't know why and that they never seen or heard of this problem before. I do not know where to buy new glow plugs...
  18. K

    TYM 273 Problems

    I don't really want to pile on or become a TYM basher but I figured I would alert you 2xx series owners to a few recent issues. 1. Gauge cluster failure - my dash gauges just quit working -...
  19. S

    TYM 273 HYDRAULIC OVERFLOW

    My 273 with FEl and BH that blows Hyd fluid from the vent hose. The fill cap located on top of the selector valve for the hoe has a vent hole and there is also a vent tube coming out of the case...
  20. P

    TYM 273 Annoyances

    Has anyone had problems with their 273? I see alot of you swear by this tractor. I bought one about a year ago and am happy, I don't use it commercially just around the "ranch", I have 20 acres...
  21. N

    Backhoe TYM 273 backhoe

    Can anyone tell me how hard it is to install the backhoe yourself. (Frame mounting)?
  22. J

    Questions on the TYM 273

    I finally drove one today while looking at a Montana. Montana is not my cup of tea. I was very impressed with the TYM 273. I don't like Hydro and I liked this one.....love the dual pedals vs...
  23. G

    TYM 273 vs Kubota 7610

    I'm trying to decide on my 1st tractor for about 8 acres, some hilly wooded and some flat/wooded/grass general landscaping/cleanup/pathbuilding. It's really down to the kubota b7610/7800 or the...
Top