I have a John Deere 05 LX280 and the pto quit. I purchased and checked the new pto switch, good switch. I next checked the pto clutch and it checked out. I then checked the ohms from the wire...

Not getting power to the pto. Checked wiring all is good along with switch on transmission. Could it be a circuit board?

Where is a good place to get John Deere lawn tractor service m*nual or w*ring di*grams, in general, and specifically for a LX280 lawn tractor? PTO stopped turning. Thought “not again”, It’s on...

Happy Thanksgiving All, I recently moved to CT into a house w/ 500'+ of flat driveway plus a 25x50 parking apron. Decided to dump my 30" snowblower and spent 3 months looking for a L/G tractor...

I have a friend who purchased an LX280 with a plow, bagger, and mower. Unfortunately, no manuals came with the unit. Right now, he is trying to get the plow hooked up, and with box of brackets...

Has anyone tried using a bagger without a power flow. Is there a bagger from another model that will fit my 48c deck. Is there at tube I can use with my bagger that will attach to my bagger and my...

Was wondering if a snow thrower from a lx280 would work on my 318? I have a line on one for a good price Thanks

Hello. I need to sell my JD LX280. Purchased it new in 2004 and it now has 168 hours. Just moved into village and this is now overkill for what I need. I paid $4500 for it now. Local dealer...

I need to replace the seat on my John Deere LX280. Can anyone point me to a source for them? And, can anyone tell me how to remove the seat switch from my old seat?

While mowing with John Deere LX 280, the mower stopped. The PTO switch was still in the run position and turning it off and on had no effect. The tractor was still running fine. I drove up to...

I have replaced the electric PTO last year and and about 10 hours after mowing i disengage it and it make a metal on metal sound then it goes away when the clutch stops spinning,the old one did...

Yesterday, I borrowed dad's mower(since it has the bagger) to suck up the leaves and I did something stupid. Stupid hurts, ya know!! Ok, the details are- Machine: LX280 with 54" deck and the...

I bought Oregon brand gator blades from my JD dealer. When I installed them there was vibration and a blade came off and I put the one back on and tightened them again (air wrench) and the same...

Does the seat and deck have to be pulled to change the oil to access filling?

My 2005 LX280 42c deck had a sever vibration and i ended up changing both spindles,belts and double pulley that runs off the motor and deck.All of the parts had some wear and the bearings were...

Hoping someone out here can give me some thought provokers because I am at my wits end with this. My 2004 LX280 starting giving me problems about a year back. It would start up and run ok 90% of...

I'd like some opinions on which JD model to upgrade to. I have a large yard (1 acre) with over a dozen or so trees/bushes and a steep incline on a portion of the yard (maybe 30 degrees). I...

I'd like some opinions on which JD model to upgrade to. I have a large yard (1 acre) with lots of a dozen or so trees/bushes and a steep incline on a portion of the yard (maybe 30 degrees). I...

JD dealer has a 2005 LX280 with a 48" deck and 45 hours on it for $3100. I can get a new Cub Cadet SLT1550 from Home Depot for $2000. The JD has only 18 hp v. 25 for the cc. Is the JD worth the...

I have a Lx280 with RIO switch. You have to hold up on the pto switch for it to mow in reverse. Has anybody figured out how to bypass this on this unit.

Hi Everyone, I am seriously considering a new tractor for my lawn. I currently am using a small JD Sabre 15.5 hp on my yard that is 1.25 acre. The yard is mostly grass and no trees at all right...

Here is my new LX280 and the supervisors chair. Note the chair has 2 drink holders.