Recent content by mykleh

another Thumb fan.. as you see in some of the pics I also had to stiffen up the top of my bucket.. initially tried to just bolt it to the top lip and quickly found it was not near stiff enough..

Just an FYI if one of my fellow Toolcat aficionados or Bobcatters in general pull a boner like me and crush their 7-pin connector between the SSQC and your attachment there is an alternative to the $300+ cable replacement.. Not associated with this company but I did order the connector on...

here is my 1620 set up.. bottom two are paired to lift cylinders top two paired to curl.. Hope this helps..

if you don't do a ton of swaps this is what I did plus my 1620 doesn't have a ton of lift capacity

if your using totes just stack them on top each other.. as soon as I can get enough that will be the only way I do wood..

I have nice established plots of landino clover in my 3 food plots and last year in one I planted Winter rye, another Deer Creek Succotash and the last buck forage oats... I planted on 8/23/17 and virtually nothing came up last year a little bit of the rye came up in spring and is growing.. I...

Oh yeah the snow comes off...

here's mine.. neighbors refer to it as my hanger...

i've also tried the gages and marks and bar length as a reference now that my wife bought a small limbing saw and seeing her 14"-24" range of cuts I bought a couple nuts and length of Nylon threaded rod and put these on the front of the stihls side cover bolts so everything is cut at 20" so it...

just get some logtongs and set the rounds on the splitter you have..

I have a "thumb" for my tractor and a grapple for my toolcat.. sometimes a picture is worth part of the explaining.. I got the thumb for the tractor as it didn't add much weight but you can see the amount of brush it can handle, works much better for smaller stuff and holding logs to cut but...

was out in the garages yesterday so grabbed some pics while everything is quietly resting waiting for the snow to melt..

my little 1620 doesn't have a ton of lift capacity plus I'm cheap so basically just leave the top cross pin in bucket, forks what have you and roll open end of tractor attachment up into it and put lower cross pin in through the holes on each side.. I don't have the bar across keeping both FEL...

I made a quick disconnect from help on here so I just leave the FEL frame on and pop off the bucket.. the visibility and shorter length is handy..

that should be posted in the people hauling things wrong section.. in a car seat but no seat belts!! looks like a "daddies girl" to me and she looks like a keeper!! you should be proud!! my recently turned 26 year old Daddies Girl still blames dad for all her expensive hobbies she did with...