Throttle moves to idle

[willis2004]

The throttle on my 2001 TC33D won't stay at the set RPM. It moves back to idle within a few seconds. Is there an adjustment on the throttle and if so how do I get to it. It looks like most of the plastic has to come off to get to that area. Thanks for any help. Willis

 

[kioskcarp]

yes it does. Found out after adjusting our tc25 10 times, a bungee cord is the best solution. even the dealer told us it was a flaw in design.

 

[Halftrack]

It is just 4 bolts, 2 on the firewall and 2 below the steering column. Move the plastic shield to access the bottom of the throttle lever. Won't take 5 minutes to tighten the resistance nut on the throttle lever. I would consider putting a locknut behind the adjustment nut and adjust it on the tight side.

 

[willis2004]

Thanks for the help. I fixed it yesterday. I even had a lock nut that fit the bolt, so I put it on. It was a quick job.