TractorLegend
Platinum Member
Re: RFM\'s - operating opinions / brand - for CK30?
I have the Kioti 72 In rfm---works great and my ground gives it a beating compard to flat, level stuff.
Only two "nit pick gripes":
Backing into briars with it, where one should use a brush hog, the hitch pin atop one of the rear wheels pulled out and left the shims and wheel behind. It could be secured with wire easy enuff. It cut the brush (no saplings) with ease.
The grease fittings point at a cutout hole for access, the hole is not centered but the fittings point at the edge making greasing with a normal tip impossible without removing belt covers. A few minutes spent with a file or bur would cure this.
I had a chunk of logging cable wrap around a spindle (arghhhh)
an it still lived.
I have the Kioti 72 In rfm---works great and my ground gives it a beating compard to flat, level stuff.
Only two "nit pick gripes":
Backing into briars with it, where one should use a brush hog, the hitch pin atop one of the rear wheels pulled out and left the shims and wheel behind. It could be secured with wire easy enuff. It cut the brush (no saplings) with ease.
The grease fittings point at a cutout hole for access, the hole is not centered but the fittings point at the edge making greasing with a normal tip impossible without removing belt covers. A few minutes spent with a file or bur would cure this.
I had a chunk of logging cable wrap around a spindle (arghhhh)
an it still lived.
