Ok, thanks to all who responded, now what do I do?…

   / Ok, thanks to all who responded, now what do I do?… #1  

Reconsaw

New member
Joined
Jul 27, 2024
Messages
18
Tractor
TX1500F
My previous post was in search of a shift gear for my Iseki TX1500F transmission. Thanks to (Tractor Tech), it appears I found a replacement. My only question now is “what is the best way to access the top shift sliders. I was thinking, which got me in this situation to begin with, to separate transmission from differential and push shaft through from the bearing side? I have never done this before and someone knowledgeable would be a blessing.
Please jump in here and feel free to direct a 78yr old trying to do the right thing.
I’ve got enough time spent in the shop and money outlay that this tractor should be done about the same time I am.
 

Attachments

  • IMG_1090.jpeg
    IMG_1090.jpeg
    5.2 MB · Views: 70
   / Ok, thanks to all who responded, now what do I do?… #2  
My previous post was in search of a shift gear for my Iseki TX1500F transmission. Thanks to (Tractor Tech), it appears I found a replacement. My only question now is “what is the best way to access the top shift sliders. I was thinking, which got me in this situation to begin with, to separate transmission from differential and push shaft through from the bearing side? I have never done this before and someone knowledgeable would be a blessing.
Please jump in here and feel free to direct a 78yr old trying to do the right thing.
I’ve got enough time spent in the shop and money outlay that this tractor should be done about the same time I am.
Shhhh, but see attached.

There are plenty of manuals for your machine on the TractorForum(dot)com.
 

Attachments

  • ISEKI TX 1300 1500 SERVICE MANUAL.pdf
    2.7 MB · Views: 49
   / Ok, thanks to all who responded, now what do I do?…
  • Thread Starter
#3  
Thank you. After separation from tunnel (between bell housing and 1st tranny, everything came apart as required and replaced gears in reverse order. Installed cover maneuvering the gears with long screwdriver everything dropped into place.
Went to start and got a runaway motor.
 
   / Ok, thanks to all who responded, now what do I do?… #4  
Knowing nothing about your tractor, I would first look for a disconnected throttle return spring. Then look for something jamming the linkage.

Bruce
 

Tractor & Equipment Auctions

2018 FREIGHTLINER CASCADIA 125 DAY CAB (A37757)
2018 FREIGHTLINER...
Mitsubishi FH Truck NO BRAKES (A40700)
Mitsubishi FH...
NEW COOL LIVING 12,000 BTU MINI SPLIT HEAT & COOL , COMPLETE DIY KIT ? 115 VOLT NEW SUPPORT (A40022)
NEW COOL LIVING...
AGT QH13R Excavator w/Cab (A41852)
AGT QH13R...
Metal Driveway Gate - K0720 (A41856)
Metal Driveway...
Mower King SS Auger w/3 Bits (A41856)
Mower King SS...
 
Top