kevingweq
Member
- Joined
- Jan 22, 2015
- Messages
- 26
- Location
- Sudbury Mass
- Tractor
- Power King.International TD7C,TD15B, 3 Mc/Deering T-20's JD318
New Holland TL70 24x24 fwd/rev hi/lo shuttle trans . Trans is fine in reverse and hi/lo ranges , forward will work until trans is warmed up slightly
then forward no longer engages , I can hear the (i think ) the pressure trying to engage the forward clutch pack , pressure reads 240PSI (in reverse and when working in forward)
Installed pressure gauge at shuttle valve and can see a slight rise in pressure (like it is trying to engage )
If I rev the engine forward will come in with a bang , Any thoughts or similar problems ?? I am leaning towards internal piston seals ?
then forward no longer engages , I can hear the (i think ) the pressure trying to engage the forward clutch pack , pressure reads 240PSI (in reverse and when working in forward)
Installed pressure gauge at shuttle valve and can see a slight rise in pressure (like it is trying to engage )
If I rev the engine forward will come in with a bang , Any thoughts or similar problems ?? I am leaning towards internal piston seals ?
