LAWALLSTRACTOR
Veteran Member
I think you will have to find a hydraulic supply company that carries Prince to find the parts. Mahindra only replaces complete valves.
MAHINDRA 3215 bucket control valve?
- Thread starter Carr73
- Start date
- Views: 8961
-
- Tags
- mahindra 3215
Thanks guys for all the comments and suggestions. I Probably should have started a new thread but this one was close.
Ill look for a hydraulic supply company and if that doesn't work I think truevalue hardware might have the ball bearings, which are I think the most critical.
Ill look for a hydraulic supply company and if that doesn't work I think truevalue hardware might have the ball bearings, which are I think the most critical.
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,641
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
I would try the hardware store first. Easier, faster, cheaper.
If all I needed was the ball bearings I would. but I need the two other pieces that go with it. The rusted ball bearings wore grooves in the center piece and in the outside piece. I can offset them but there isn't any guarantee it will stay that way.
I tried a hydraulic place and I am getting the runaround. They sent me to Prince and Prince is saying that it is a KMW/mahindra proprietary valve and I have to go to them to get parts. Seems kinda sill to me because for a valve that size I bet all the spools are the same with that floating feature.
With that crazy water trap of a construction id think there would be a decent demand for kits to fix them.
-Bryan
Sergei
Gold Member
Since the Mitsubishi series was sold I believe by Cub Cadet under thier name might their dealers also carry the parts you need, you might checked with one of them.
