Kubota L 4330 want to add rear remote from ft.end loader?

[wd5mhz]

Hello Group i have a question i have a Kubota L 4330 hst C i want to know if i can add a rear remote for a hyd top link. Can i tap in to the front end loader hyd system? were the hyd comes out of the tractor to the front end? what i want to do is get hyd to the rear and use a 2 spool valve and make rear remotes?

The kubota price is way to high for me i want to do something cheaper. do you have any ideas?

Thanks
Mike Henry

 

[J_J]

If your tractor has a hyd block, you can interrupt the line going back to the 3pt input.

If it is metal lines, you can cut and use compression fittings.

 

[s219]

There should be a power beyond port on the loader control that is currently plumbed back to the 3-point. Run that to your rear remotes and then run the output from the rear remotes to the 3-point.

 

[TomSeller]

As the earlier responders have said, you should fine. First, identify the power beyond port (what is going to your 3 pt,) and intercepting the hydraulics there for the basic remote setup.