JD 4020 series hydraulics?

mechatgsk · Sep 9, 2011

Hello, I was wanting to view how the new EH 3rd scv, the 4th & 5th scv, and the Power Beyond kit plumb together on the new MY2011 4020 series compact tractors (Open Station). I have looked at JDParts with no luck viewing the whloe system plumbed together.

Regards,
Mechatgsk

kennyd · Sep 9, 2011

Not sure I fully understand the question? What exactly do you want to know? This is a entirely new setup from JD so info is somewhat limited.

Rockgod · Sep 9, 2011

mechatgsk said:
Hello, I was wanting to view how the new EH 3rd scv, the 4th & 5th scv, and the Power Beyond kit plumb together on the new MY2011 4020 series compact tractors (Open Station). I have looked at JDParts with no luck viewing the whloe system plumbed together.

Regards,
Mechatgsk

Best I can do is a cabbed install photo. Sorry no Power beyond.

Rockgod · Sep 9, 2011

The switches are at the top/right marked IV and V.

Hope this helps.

mechatgsk · Sep 9, 2011

Hello, I will try and explain the question better. I would like to see a drawing or actual photo of the new 3rd EH scv kit, 4th & 5th scv kit and Power Beyond kits installed together on a 4020 series open station tractor. Thanks to all previous replies!

Regards,
Mechatgsk

Robert1111110 · Apr 2, 2012

Hello, i was wondering what does "scv" stand for?
Also I was hoping someone can help.
I recently purchased a 1967 4020 with power shift and only 2 hydraulic hookups.
I need 3 (loader with grapple). Also the 2 levers I do have are located on the left side of the dash, which is completely useless for loader work. Local dealer quoted me a price of $5600. To install a joystick and a power beyond kit. This is not an option. Any ideas? Thanks, Robert

couchsachraga · Apr 2, 2012

Valve Kits for your 3rd valve.

You may want to start a new thread, as the 4020 you are talking about is different than the 4000 TWENTY series the original poster is talking about.

Robert1111110 · Apr 2, 2012

Thanks, brand new at this forum world

Zebrafive · Apr 3, 2012

Robert1111110 said:
Hello, i was wondering what does "scv" stand for?
Also I was hoping someone can help.
I recently purchased a 1967 4020 with power shift and only 2 hydraulic hookups.
I need 3 (loader with grapple). Also the 2 levers I do have are located on the left side of the dash, which is completely useless for loader work. Local dealer quoted me a price of $5600. To install a joystick and a power beyond kit. This is not an option. Any ideas? Thanks, Robert

SCV = Selective Control Valve

With a 4020 try posting in the John Deere AG Tractor section