electrycmonk
Silver Member
- Joined
- Nov 6, 2018
- Messages
- 212
- Location
- Near Denton, TX
- Tractor
- Satoh 370 diesel & Cub Cadet 7260 Diesel 4WD standard
i've been to and downloaded the pdf of the user/owners manual for this puppy.
1) after a serious pressure washing the decades of mud buildup, got it clean enough to see and break the bolts and nuts loose.
2) got out a chisel and hammer to test if thats what it needed to pop that lid off the gasket. NOPE. a handful of taps on both rear corners and nothing popped away.
So, any suggestions for getting this assembly off the top of the transaxle?
I need to get in there to look at the forks and shafts. I can not get this puppy to shift into high gear for the upper 4 speeds.
1) after a serious pressure washing the decades of mud buildup, got it clean enough to see and break the bolts and nuts loose.
2) got out a chisel and hammer to test if thats what it needed to pop that lid off the gasket. NOPE. a handful of taps on both rear corners and nothing popped away.
So, any suggestions for getting this assembly off the top of the transaxle?
I need to get in there to look at the forks and shafts. I can not get this puppy to shift into high gear for the upper 4 speeds.