Trackks9
Bronze Member
Any thought's on a john deere GT275
GT275
- Thread starter Trackks9
- Start date
- Views: 1562
-
- Tags
- john deere gt275
RetiredCarGuy
Silver Member
- Joined
- May 2, 2014
- Messages
- 116
- Location
- New York State
- Tractor
- John Deere X575 4X4 and GT235 6 speed, plus an old Allis Chalmers
To buy or sell - new, used or trade? You probably want to pick one up and are looking for some owner experiences.
DrBill
Bronze Member
- Joined
- Jul 16, 2014
- Messages
- 79
- Location
- Murfreesboro,Tn.
- Tractor
- 755 and GT245, also IH Cubs, 1450 and 1650
if I have my models straight,, this model came after the 265 and it still uses the Kawasaki single cylinder engine 540V.
I'm a fan of Kawasaki and this engine is tough. I do know this engine has had some issues with ignition coils and igniter boxes that sometimes go bad. Keep this in mind should you ever have starting or running issues.
Also, it seems the piston, rod, and crank are solid in these engines but they do have a counter-balancer that reduces vibration. During the last stages of these engine's life often the engine will throw the balancer thru the block. Because of this do your best to keep the oil level correct and changed regularly.
I'm a fan of Kawasaki and this engine is tough. I do know this engine has had some issues with ignition coils and igniter boxes that sometimes go bad. Keep this in mind should you ever have starting or running issues.
Also, it seems the piston, rod, and crank are solid in these engines but they do have a counter-balancer that reduces vibration. During the last stages of these engine's life often the engine will throw the balancer thru the block. Because of this do your best to keep the oil level correct and changed regularly.