RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,885
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
On my "hog", there's a check plug about 1/3 to 1/2 way up one side and a vent on the top. For filling, the vent is the easiest to use. Just fill from there but with the lower plug removed.
For suctioning oil or brake fluid, I use a MiniVac. You can also get something like a Pela extractor that many use to remove motor oil on vehicles that have a bottom shield in place. I've gonna get one to remove oil from my generator because I made a mess the one and only time I drained it out onto the ground (no way to get anything under it). Will need it later to change the oil on our VW TDI after the 3 years' worth of free service is run out.
If none of your seals are leaking now, doubt you did any damage.
Ralph
For suctioning oil or brake fluid, I use a MiniVac. You can also get something like a Pela extractor that many use to remove motor oil on vehicles that have a bottom shield in place. I've gonna get one to remove oil from my generator because I made a mess the one and only time I drained it out onto the ground (no way to get anything under it). Will need it later to change the oil on our VW TDI after the 3 years' worth of free service is run out.
If none of your seals are leaking now, doubt you did any damage.
Ralph
