79Speedster
New member
Hey Guys,
Hoping you can provide some help for me. My Boomer 8n will not start as it should. If I am patient and make 15 to 20 attempts turning it over it will start and run fine. At first I was thinking it may be the glow plug system, but even when it's warmed up if I turn the tractor off and try and restart its the same story. I looked at the service manual and I can't find anything to address this problem. It almost seems that the tractor will only start when the battery starts loosing some of its cranking power.
I checked the fuel solenoid and it is working properly and within tolerances. There are too many relays on this thing to start eliminating them one at a time. Once it starts the tractor does not show a code on the dash so I'm at a loss.
Thanks in advance,
Mark
Hoping you can provide some help for me. My Boomer 8n will not start as it should. If I am patient and make 15 to 20 attempts turning it over it will start and run fine. At first I was thinking it may be the glow plug system, but even when it's warmed up if I turn the tractor off and try and restart its the same story. I looked at the service manual and I can't find anything to address this problem. It almost seems that the tractor will only start when the battery starts loosing some of its cranking power.
I checked the fuel solenoid and it is working properly and within tolerances. There are too many relays on this thing to start eliminating them one at a time. Once it starts the tractor does not show a code on the dash so I'm at a loss.
Thanks in advance,
Mark