345 with 54" (not C) deck, power flow bagger question

[powrguy]

I have 345 with the 54" deck, not a 54C deck, and have the 6.5 bushel powerflow bagger on it.

The top is cracked, the seal is missing on one side, the framing is bent, and it doesn't seal. Rather than putting a pile of money in parts, does anyone know it the same bagger system that's for a 48" deck, will fit (other than the blower mount and chute), as I have my eye on one like that which is in good used shape.


thanks

 

[Spanner]

The bagger itself is seperate from the blower and the chute tubing so I don't see why not.

Your sizing confuses me - 6.5 bushel? We don't use the bushel system down here but I see the 3-bag Collector is 14 bushels. So that's just over 4.5 bushels per bag.
The 2-bagger would be 9 bushels approx. How many bags for 6.5 bushels? May be 2 x small bags? (Just curious).

 

[powrguy]

The bagger itself is seperate from the blower and the chute tubing so I don't see why not.

Your sizing confuses me - 6.5 bushel? We don't use the bushel system down here but I see the 3-bag Collector is 14 bushels. So that's just over 4.5 bushels per bag.
The 2-bagger would be 9 bushels approx. How many bags for 6.5 bushels? May be 2 x small bags? (Just curious).

Well, according to the OMM145411LO (MX1552) manual that came with the Power Flow 7-Bushel Rear Bagger, it's not 6.5 bushel, and DOES have the two bags. I guess the bags on this one are smaller than the newer ones.