3 function on Kubota BX24?

[samofsweden]

Hi everyone!
New here. I just bought my self a BX24.
I would like to be able to fit a 3 hydralic funciton on the backshoe, because
Im going to fit a "powertilt" which makes life alot easyer when landscaping in gardens. And a 3 function on the frontloader would help me aswell.
Has anyone done this on a BX23 or 24?


(I know that this kind of functions come on 360s and bigger tractors like Kubota B26)
Thanks,
Sam

 

[Volfandt]

Many folks have added hydraulic grapples to their FEL's, do a search on BX grapple for more info.
Basically, they use an elecrically controlled hydraulic "switch" to switch hydraulic power from one of the FEL's circuit's and divert the power to the grapple cylinder. SOme mount the electric switch on the FEL joystick and some have made it a foot controlled.

Kubota offers a remote hydraulic valve kit for the rear to get an additional circuit for other uses such as Top & Tilt, control of a hydralic dump trailer etc.
There have been some here that have integrated a remote valve into the Back Hoe hydraulic "loop back" circuit with success.

Congrats on your new BX24, they are very handy machines.
Good luck.

 

[samofsweden]

Volfrandt, thanks for your information!
That sounds like the way to do it. I will get use to the machine before I make any adds. Is their any hydralic drawings of the BX24 to get hold of? I found one for the BX23, dont know if they are the same?
Im located in Sweden....so my Kubota is now sailing over the ocean to North Europe.
/Sam