2750 snowblower electric chute rotation and deflector project

[rabbott]

I did a similar a few years back. Only difference was I found the Kubota kits for rotate and angle on ebay, about $ 100 for both. The angle actuator was for a larger blower, but a few new holes fixed that issue. I also terminated to a box wit a connector that I can disconnect easily with the blower. Another small box with the controls attaches similarly to your config.

paul

Beautiful Job, Best I've seen yet. Any idea what to rotation motor is RPM and torque wise?

Thanks
Rabbott

 

[Kevan3x]

Finally got around to mounting my actuator and motor on the 2750. Really pleased with how everything turned out. Went with a simple mounting system and all in figure it cost me under $200 for the works.

Works great in sub -30c temps and no problems with snow buildup around motors.

Here's a video of the project for those interested:

Kubota 2750D Snowblower Motorized Chute Rotation and Deflector - YouTube

PS. Princess Auto here in Canada has the power seat motors on sale this week for $6!

Couple you give motor number

 

[Kevan3x]

Not sure what kind of seat it's off but here's where I got it 12V Gear Motor | Princess Auto

Goes on sale every month or so for $6 so pretty inexpensive.

Motor you used please

 

[NHBX]

Original poster not seen since July 2017!