Rwlight
New member
Everything else works fine, bucket roll and lift down...but goes very slow when I try to lift it up....any thoughts?
200cx loader slow lift
- Thread starter Rwlight
- Start date
- Views: 5243
TBN Support
TBN Support
- Joined
- Feb 4, 2015
- Messages
- 4,561
Welcome to the forum. :welcome:
I'm going to move your thread on over to the John Deere section to see if we can get you some help.
I'm going to move your thread on over to the John Deere section to see if we can get you some help.
kennyd
Advertiser
Welcome,
Try unplugging, cleaning, then reconnecting the 4 hydraulic quick-disconnects (QD's), this fixes 90% of all "my loader won't xxx" problems. The other 10% are bad QD's.
Try unplugging, cleaning, then reconnecting the 4 hydraulic quick-disconnects (QD's), this fixes 90% of all "my loader won't xxx" problems. The other 10% are bad QD's.
topstoy
Silver Member
Do you have a lock lever just below your seat that might have shifted over?
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,527
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
A buddy has the same tractor that I have used a few times. The loader in it is slow. The tractor only produces 2.9 GPM. It just isn't going to be very fast.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,563
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
4570
Not sure how you know the tractor the FEL is on, as it wasn't mentioned. Or where the 2.9 GPM came from?
Not sure how you know the tractor the FEL is on, as it wasn't mentioned. Or where the 2.9 GPM came from?
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,527
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
His profile says a JD 2305. 2.9 GPM is a published spec.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,563
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Sorry, I missed that.. 
kennyd
Advertiser
Even still, he is complaining about only ONE function being slow, not everything.
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,527
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
JD should have published the time required to lift to fill height at a given rpm. Should be pretty easy to check if it works correctly.
