ajallen350
New member
- Joined
- Dec 5, 2018
- Messages
- 4
- Tractor
- John Deere 5075E, John Deere 110 TLB, Massey Ferguson 231S, Yanmar
Has anyone on here calibrated the hydro stat transmission controller "HST" on a 110 tlb before?
I had some issues with mine and thought I was ready to calibrate the sensors so I put the fuse 11 in fuse 12 slot and start the automatic calibration. I get to . . - - "forward threshold coil" when I press the forward pedal I get no output from controller.
Before I spend $900 for a controller I wanted to see if someone has completed this calibration before, maybe I'm doing something wrong or not in order something. I've checked all sensors, they calibrate just no output to forward coil, it just sits there.
Thanks
I had some issues with mine and thought I was ready to calibrate the sensors so I put the fuse 11 in fuse 12 slot and start the automatic calibration. I get to . . - - "forward threshold coil" when I press the forward pedal I get no output from controller.
Before I spend $900 for a controller I wanted to see if someone has completed this calibration before, maybe I'm doing something wrong or not in order something. I've checked all sensors, they calibrate just no output to forward coil, it just sits there.
Thanks