2" trailer ball on box quick hitch

[DiskDoctr]

My version on my LMC BB:

View attachment 480548View attachment 480549

Very nice! Did your BB have the center brace already, or did you add it?

What are the teeth? Did you add those? Looks like you added weight, too?

 

[ultrarunner]

View attachment 479803
Here's what I did. No welding.
Lenny

Did you fab it or find it off the shelf...

I don't own a box blade but my brother does... would come in handy moving around the farm yard.

 

[FTG-05]

Very nice! Did your BB have the center brace already, or did you add it?

What are the teeth? Did you add those? Looks like you added weight, too?

The triangle was alrea1dy there installed by the manufacturer; you can see it on their MT BB here: Box Blades

The rear is a 8"x8"x72" steel, lead and concrete weight block. It weighs 410 lbs. I made it into a Rachet Rake (yellow teeth) holder as well. Total weight = 520 lbs. Made the BB far more effective.

 

[DiskDoctr]

The triangle was alrea1dy there installed by the manufacturer; you can see it on their MT BB here: Box Blades

The rear is a 8"x8"x72" steel, lead and concrete weight block. It weighs 410 lbs. I made it into a Rachet Rake (yellow teeth) holder as well. Total weight = 520 lbs. Made the BB far more effective.

Sweet! What are the box sleeves for on each side of the triangle? Do you mount something there?

What do you use a Rachet Rake for? I use the BB, then York Rake with the spring tines. They don't look deep enough for much seeding?

 

[FTG-05]

The "box sleeves" are 3/16" stake pockets from AWDirect. Far more useful for chain work then hooks.

I've used the RR once, then never again. For me, didn't work all that great.