Search results

After being employeed by the Nashville Rescue Mission, (a 900 bed homeless shelter), for 24 and 1/2 years I am retiring. I was the classic story of mailroom to CEO. Well, not mailroom but an entry level Chaplain to President and CEO. My last offical day as President and CEO will be February...

Will a Mahindra 3325 (35 hp) pull a subsioler? I am not talking about middle buster with a plow or cultivator blade. I am thinking about a 12 inch to 18 inch steel shank about 1" by 3" with a point. I would like to put it at least 12 inches in the ground. I have a few place where water...

A friend of mine is restoring a John Deere 520 or at least he is tryng to restore it. The problem is he can't find many parts for a 520. Do any of you know of a good parts scource either new or used? We live in middle Tennessee so if parts are availalbe in the southeast that would be great...

I posted this question in both the Vintage JD forum and current JD forum. I realize what i am asking might be impossible but my friend really like using this tractor and he said it is just the right amount of power and size to run his rake. "Can a dual spool be put on a 1957 JD 520 tractor? I...

Please help me understand how this works and what it exactly does? Don

Can a dual spool be put on a 520. I need to operate a front end loader and a rear implement at the same time. I need two independent hydriclics. Don

I own a 35 hp tractor and just bought a TSC sub-soiler. How deep should I run it and how far apart should I make the cuts? Don

I have searched and searched and i can't find any information on the ground speed of my 3325. What will be the mph for 1st gear low range? Don

I own a 3325 Mahindra, which is a 2wd 35 hp tractor. I am going to pull a 3pt 60" TSC tiller. I have never used a tiller in my life always used moldboard plows. So here is my question what gear and range should use for this project. I have tight soil with some clay. Don

I bought NAPA 5w40 for my 2006 Mahindra diesel tractor. I was wondering who made? Don

The oil dipstick on my 3325 doesn't have a full or low mark. All I have is two small holes on the dipstick. Is the bottom one needs oil and the upper one is full. Is there a quart difference between the two holes? Here is a crazy question but a serious one to me! The manual says with an oil...

I posted the following message a week ago. I am now trying to fix the problem. "My 3325 will be 3 years old July 2009. I put a new battery in the tractor a month ago. I put in what was called for by the manufactor. It started and ran well. I went out last evening and tried to start it. I...

My 3325 will be 3 years old July 2009. I put a new battery in the tractor a month ago. I put in what was called for by the manufactor. It started and ran well. I went out last evening and tried to start it. I put everything in netural turned on the key all the lights turned red as they...

I own a Mahrinda 3325 tractor. It is a 2006 model. My battery is dead. I am at work and want to buy one on the way home tonight. Does anyone know what size battery I need? I would really like a parts number from NAPA, or another parts store. I like Interstate batteries. What do I need to...

I own a i1046 Cub and like it but I haven't used it much yet. I was wondering how everyone else is enjoying thiers. The i series is kind of a hybrid of the zero turn and regular turn mowers. Is anyone having problems with their i series? Tell me what ya think. Don

Yesterday at my local Home Depot I saw a Cub Cadet model 1046 Zero Turn mower with a Kohler 20hp on sale for $1,500.00. I was offered an additional 10% off because I am previous military bring it down to $1,350.00. The mower has 1 hours on it and is being sold as a reconditioned mower. It was...

Here are two tractors advertised in the classified section of thuis site. I was wondering which one I should look at first: The 2007 Kubota B3030 in Brookville, OH for $190000.00 7/26/08 or the ford 1700 less than 1000 hours 4X4 Acton, CA for $8.00 7/22. I would guess the Kubota for...

Below is a report on my family. If you bleieve in God and I sure hope all of you do, please pray. Friday evening July 11th my wife, middle daughter, her husband, grandson and granddaughter were involve in an extremely bad auto accident. They were rear-ended on I 24 near Pleasant View TN...

I am looking for a 2wd 35 to 40 hp tractor. I want live PTO for sure and might want to add a FEL at a latter date. What tractor should I look at? Don

On Agricredit's website their are 36 tractors for sale and 20 of the 36 are Mahindra. I wonder why there are not any Kubota or John Deere's. Don

I have a 35 hp tractor and need a rototiller. I would like 5' wide and for sure no smaller than 4'. What brands would work well for me? Can I find something under $1,000.00 hopefully new. Parts are a real concern to me. My ground has few rocks if any but it is heavy soil some clay. Don

I saw a new tractor once which resembled an 8N ford. I was told it was actually a new tractor built from old ford molds. What brand was it? Please tell me i am going crazy trying to remember. Don

I just had the 50 service completed on my 3325 Mahindra by my dealer. It did cost as much as I had anticipated. The changes: Engine oil (6 quarts) Oil Filter (1) Fuel filters (2) Air filters (1) Hydraulic fluid (3 gallons) Hydraulic filter (1) Gear Oil (5 gallons) Grease tractor Checked...

I just completed a great article about Dave's Tractor in Red Bluff, Ca. The same Dave who post on here. Congrats Dave concerning the honor. To read the article for yourself go to Mahindras website. Don

Saturday morning I received a call from a polster. They wanted to know if I owned a compact tractor. I do own a Mahindra 3325 so I told then I do. The questions asked concerned what I own, how big it is, what I use it for, when I bought it, was I the person who operated it and was I the...

I sold a 245 IH Case in average to rough condition with 1082 hours for a high bid of $2,800.00. Don

I sold, I'm an auctioneer, a Case 245 at auction August 25th. It had 83 hours on it yes, 83 hours and it looked like it did. The engine wasn't even dirty the tires still had the rubber **** on them. It sold for $5750. I thought it would sell between $4500 and $6500 and actually more towards...

I need a sprayer 3 point hitch to spray hedgerows and fense lines with. I assume I want something in the 50 gallon range. I think I want a gun sprayer not a boom or broadcast. What should something like this cost me. I haven't found anything under $499 and that doesn't include the roller...

I was operating my bush hog a few days ago. i was in some really heavy grass, hadn't been cut in about two years. In order to keep my PTO running at 2000 rpm's i had to open my throttle wide open. I noticed after I got through the heavy grass I was only running at 2500 rpm's. Here is my...

Has anyone used a sub-soil plow? I have a wet area in my feild. Will breaking it up with a sub-soil plow help? Should I run the plow about every 5, 10, 15 or what distance apart? Will a 35HP tractor be big enough to pull one. i am trying to breakup sod. Any advice will help. Don

If you are looking for a good utility tractor and don't want a FEL a Mahindra 3325 is a very good choice. I own one I put 31 hours on it and have worked it to death and couldn't be better pleased. I have a 5' bush hog and have cut down 2" and larger trees. Pull a 6' Finishing mower and it...

I bought one at an auction yesterday. Only paid $55.00 for it. It looks nearly new. I don't even know what one would cost new. Now what kind of jobs can you do with one? Could you clean ditches with one? I don't have a FEL and I have a small mound of dirt I need to move. The scoop I...

I am looking for a good 6' finishing mower. Ii have a 35 hp Mahindra model 3325 2WD tractor. Here are some questions. Are all of these mowers belt driven from the gear box to the mower blades? How thick should the metal be on the deck? How important are scalping wheels? Do I really need...

I own a 3325 and I bush hogged Saturday afternoon. First thing I had to do was replace a shear pin in the PTO shaft on the bush hog. I sheared it off last year. Once I got this fixed I began working. Some how I kicked the high and low lever into netrual. My PTO stopped running but the...

Saturday, 3/31/07, I heard a Mahindra commerical on a local AM station in Nashville, Tennessee. Good informative 30 second add. Should give exposure to local dealers. Don

I parked my 3325 in October. I put a block between the clutch petal and the housing so the clutch wouldn't freeze then I forgot it until last Sunday afternoon. I put in the key hoping it would start right up. Guess what it started in about 5 seconds. Mahindra is still # 1 with me. Don

I own a 3325 Mahindra 35 hp, single stage clutch 2006 model. How difficult or is it even possible to add a, I think they are called spool, to my 3325 so I can operate a hydraulic disk on wheels? Or any other implement which needs a remote hydraulic piston. Don

Saturday I attended a auction sale where a Mahindra 4500 sold for under $8,000. I was late but a friend of mine told me was a real steal. Below is the catalog description. 2006 Mahindra 4500 s# UP1346 372 hrs This tractor has a list price of MSRP: $14,209. Wish I had gotten there...

I love my 3325 got 11 hours on it now and will but on more this weekend. When I bought my tractor I asked about and saw the service department. They have a complete parts department, but they sell other equipment also, and two mechanics. Actually the mechanic demosterated the tractor and...

I am reposting this under another title. I know someone on here knows the answer. Reason I ask is two fold. 1. I have been told both I can and I can't from the dealership. Salesman say I can, mechanic says I can't 2. I would like to add this option some day but it won't kill me if I...

I may not really know what a spool is so let me explain what I think it is. A spool is what I connect a hydralic hose to to lift an implement not connected to the 3 ph. I understand the spool comes standard on a 3525 and not on a 3325. But I notices where the 3525 has it connect there is a...

I have seen this, subcut or scut, for sometime now and have no idea what it means. Is there any place on this forum where abreviations are explained? Don

I just bought a 3325. When I signed the papers for me and the bank to both own it; I was told by the mechanic that I will drive my tractor at least 1 hour a month winter, spring, summer and fall. He told me if I let it set up over the winter the clutch could freeze closed and not operate. I...

I own a 3325. I have put 10 hours on it in heavy weeds and brush. I have noticed the air breather stack sticking down through the top of the hood is swirling with dust and chaft. Here is my question; "How do you clean it?" I looked in the manual and it doesn't give instruction at least where...

I bought an Iseki TS 2205 about 2 years ago. Shows less than 500 hours. Good tires, sheet metal. Problem won't start. Ran it out of fuel and have never been able to start it since. I think the o rings in the injector pump are bad or it is out of time. I am NOT a diesel person so I don't...

I bought a new Mahindra 3325, 35 hp, June 30, 2006. I have put 4 hours on it so far. Yesterday afternoon between morning church and evening church I was bush hogging some of my property. I haven't had a tractor for 2 years so the brush was thick and high. I had the tractor in 1st gear low...

Yesterday I took delivery of a new Mahindra 3325. I hooked up my bush hog, rotary cutter, and worked for a litle over 1 hours time on my watch. But my tractor showed I had put 2 hours on it. I was in really thick grass and was in 2nd low. Never had a tractor with an hour meter before. Don't...

I bought a TS2205 Iseki over two years ago. I liked the tractor but hated not being able to get service or parts. I am not extremely mechanically inclined so I had to rely on mechanics to do my work. I couldn't even find one who was willing to work on an Iseki. Parts were another story. I...

My Iseki TS 2205 has an Bosch K (type) inline injector pump. I just got a manual for my tractor but it doesn't discuss injector pumps much. The pump, I am told, is made in Japan but it has the same design and specs as a Bosch model K pump. Here is my question. On top of the pump next to the two...

My Iseki TS 2205 has an Bosch K (type) inline injector pump. I just got a manual for my tractor but it doesn't discuss injector pumps much. The pump, I am told, is made in Japan but it has the same design and specs as a Bosch model K pump. Here is my question. On top of the pump next to the...

Iseki TS 2205 won\'t start ran out of fuel! As many of you know I ran my Iseki TS 2205 tractor out of fuel. I bled the lines and got it running again. It ran for about 1/2 a tank of fuel. I parked it and went out the next day and it would not restart. We look for fuel at the top of the...

Iseki TS 2205 ran out of Fuel still won\'t start!! As many of you know I ran my Iseki TS 2205 tractor out of fuel. I bled the lines and got it running again. It ran for about 1/2 a tank of fuel. I parked it and went out the next day and it would not restart. We look for fuel at the top of...

Iseki TS 2205 still won\'t start As many of you know I ran my Iseki TS 2205 tractor out of fuel. I bled the lines and got it running again. It ran for about 1/2 a tank of fuel. I parked it and went out the next day and it would not restart. We look for fuel at the top of the injectors. We...

Iseki TS 2205 ran out of Fuel still won\'t start!! As many of you know I ran my Iseki TS 2205 tractor out of fuel. I bled the lines and got it running again. It ran for about 1/2 a tank of fuel. I parked it and went out the next day and it would not restart. We look for fuel at the top of...

My Iseki TS 2205 ran out of fuel. I got it started to only have it not start one day later. Here is what happened. I ran out of fuel. We cracked the fuel lines and bled the air and it started. I ran it for about 1/2 a tank of fuel. I parked it and the next day it wouldn't start. I again...

Finally got Iseki TS2205 running and it is not over heating. Boiled out radiator and got plenty of rust and scum out of it. I ran my tractor with my 5' bush hog for about 45 minutes in extemely high grass and weeds and it didn't over heat. My next question is my tractor has 4 settings for...

Made a dumb mistake. Ran out of fuel with my Iseki TS2205. I have bled the lines and have fuel at the injectors (bolt on top of injector) and it still won't start. I have checked the glow plugs I am only getting 4 or 5 volts. I think I need new glow plugs. Am I correct. Should I be getting...

If you were on a tight budget what tractor would you buy? Give me the best value for the money.

If you had all the money you needed which tractor would you buy? Give me yourcdream tractor.