Search results

I have a shift lever issue with my new to me 350 utility when I shift the tractor the lever has extra play once in gear and I have to play with the lever to get it back out of gear at times. Once the lever is in the proper place it goes in and out of gear easily. The pin in the lever seems to...

I have a friend who has a loboy tractor the serial number puts it in as a 1960 model. When I search this tractor I can't find one with a seat like this one has wondering if anyone has seen one like this was it an option or maybe added later or am I missing something in my search?

I looked at what I believe is a 1960 Lowboy it started and ran very well when I drove it and throttled up while moving it smoked you could even smell it but it ran very smooth and started immediately, The guy who owns it said you seldom need to choke it to start it he has had it only a few years...

I had an unfortunate occurance the other day with my cab after a snowy ice storm ended up shattering the windshield on my Curtis cab. Problem is the Curtis company discontinued support for glass and cab parts as my tractor is no longer produced. I did see a post where a person had a windshield...

Picked up an old Cub 72 this summer after plowing snow thought I would get it out and run it a bit.

Looking for a trailer to haul a 3 seat Polaris Ranger thinking because it will sit outside I would be wanting an aluminum frame which would also be lighter for both towing and moving around the yard. Thinking single axle without brakes not too overpriced but durable anyone using anything like...

We live in a rural area and about a mile away is a park that has three ball fields and a small golf coarse. The park is run by the local Lions club we enjoy walking over to it with our Labrador retriever next to it is an old railroad right of way which we walk also. The golf coarse used to be a...

Built a porch/3 season room on to house my wife would like the porch exterior to be sided with cedar shingles for siding. The rest of the house is vinyl siding what do you think of the idea and how much maintenance do you think it will be?

I always hated filling the gas tank on our Ferris mower as in order to get it to the full mark you had to fill slowly once it got up to the bottom of the filler neck which extended down into the tank a bit. Always spilled fuel as it reached the bottom of the filler neck and no way for air to...

I want to change the antifreeze in my DX 40. I put a Curtis cab with a heater on it. The heater is higher than the radiator. The question is am I going to have trouble with air in the system if the heater core is drained? I'm thinking about clamping the line off going to the heater...

Does anyone know if they made front fenders for the DX 40? If so where could I get some?

This has been on craigslist for a while seems like a good price for a unused loader if someone could use it. new holland 270tL loader attachment

I recently acquired a 38 inch precision lawn sweeper that is weathered but other wise in pretty good shape. The only problem is one of the wheels lock up instead of turning the brush. I found a manual online, it turns out there is a small part callea a pawl that is broken inside the wheel...

I have zero experience with 3 point snow blowers, I found a 7 foot Arps twin auger blower looks to be in good condition owner says it works good. Will my tractor handle it or should I keep using my snow pusher? I thought if I ever pave the driveway a blower would be a lot friendlier to the...

I want to add a rear remote hydraulic valve to my 2008 Case DX40, does anyone know what the Case part number would be? I have been trying to search but not much luck I think there is a different part number for each one you add. I currently have none on my tractor.

My lawnmower has a fs691v Kawasaki engine, I picked up a spare filter from the dealer whhe I bought the mower. The mower had a Kawasaki filter. The dealer gave me a Rotary 19-6929 filter. I didn't realize it until I was changing the oil tonight. I put it on and it fits but just like to double...

I want to add an enclosed lean-to to my garage with a concrete floor. It is right next to a steep bank, so I am considering putting down several inches of pea gravel under the slab. My thinking is any water that gets under the slab can drain out the side of the bank to prevent heaving. Would...

Dealer has one, brand new with a Kohler pro 25 hp engine for $4400 would this be a good zero turn for the money? I think it has the 3400 transmissions but not sure. Are all the zero turn transmissions made by the same company? Anyone have one of these mowers, it looks like a lot for the money...

Any one have one of the new Kommander series zero turns from Kubota? How are they performing? The warranty looks pretty good, I wonder how well they cut. My wife is doing most of the mowing now and would like something that steers easier than our John Deere all wheel steer it has been a good...

When looking at zero turn mowers they talk about the transmissions in numbers like 2800, 3100 or 3200. My question is do all the manufacturers use transmissions built by the same company, which I would doubt but not sure, or does the number indicate a size or build standard or something else...

This fall I was plug aerating my lawn, we had a dry summer so the ground was a bit hard even though it had just rained. I had to load down the aerator with some pretty good weight to get the aerator to cut in. My lawn is one and a half acres, all went well for about an hour then the lawn...

I found a new Curtis cab for my DX 40, dealer has had it for almost three years now. It comes with heater for $2500.00, they no longer make my tractor or the Curtis cab to fit it. Should I jump on this deal or pass, are people happy with their Curtis cabs? I'm really leaning toward getting...

Got a subscription offer in the mail, is it worth getting? Never saw it before, says it's been around since 1977. Thanks

Is it a problem mowing existing lawn every six to eight weeks with a rear finish mower? If the grass is six to eight inches tall will it plug easily? I would rather have a finish mower than a brush hog, just think I would get more use out of it, but not sure how it works on taller grass. I...

For sale on Craigs List in Waupaca Wisconsin, comes with a TL250 loader. Ad says new for $19595.00. I thought it sounded like a good price, just wanted to pass it on. Maybe others are finding better deals, I don't know. The dealer is Swederski Implement.

Does anyone know anything about older Hansen snowblowers? I found a 6 1/2 footer for $650, would like to try on my DX40. The ad says it works good, never used a snowblower before. It is a three point rear blower.

When we were building our house we hadn't planned on any other buildings so put on a three car garage right away. But as the house was being built one of my co-workers told me his daughter had a garage she didn't want so we ended up moving it to our new location. It sure came in handy right...

Has anyone gotten a quote on a CT335 with a cab? Wondering what they are selling for.

My brother has a F525 with 360 hours on it. He says it smokes when it runs but if he puts Marvel Mystery oil in the gas the smoking stops. What could be going on? He says the mower runs just fine.

Does anyone know what is the smallest tractor Bobcat offers with a cab and what is the height of the cab? Thanks

Looked at a 1999 4100 4x4 with 771 hours on it with a front snow blower and a 60 inch mid mount mower deck. It starts right up has a hydro tranny that worked fine, the seat is in rough shape and the hood is dull from mowing under low branches. Also the fenders are rusty from blowing the salty...

Shopper came out today with front page ad for a 32 HP Cub Cadet tractor with 3 speed hydro four wheel drive and free loader for $14,999. I thought it sounded like a pretty good deal. What are people paying for these things? When I was looking a few years back I think they wanted around...

The pitman arm broke on my sickle mower, it sat outside before I got it. When I got it I soaked it with drain oil, got a few years out of it. Was wondering if I could make one out of steel instead, I have no where to store the mower except outside so a metal one would last as long as the...

I have a lx 277 AWS with a 48c mower deck, the pulley went out on the center spindle so I ordered a complete spindle assembly off E-Bay. I need to remove the pulley to mount spindle on deck, how tight do I have to torque the nut that holds the pulley on?

I was working with my Case DX 40 last night plowing snow. I went down a steep hill into the woods, on the way out I was climbing the hill to the road. She started spinning so I pushed the differential lock. The lock seems to be set a little too far back so when I pushed it I inadvertently...

I was having trouble finding 10 w 30 oil for my Case DX 40. I stopped at Fleet Farm today and found Mystic 10 w 30 the only brand besides Fleet Guard they had. Will this be a good oil for my tractor? It was a little over $18.00 for two gallons. It is a semi synthetic oil that exceeds API CJ-4.

Went out to work on the garage, putting in a metal ceiling, ended up washing and waxing the tractor and riding lawn mower. I will try to post some pictures later.

It is a five by eight steel box for a bed with a fold down tailgate. Don't know the make, looks in real good shape, it is a tandem axle. The axles look to be centered in the middle of the bed. No brakes on trailer, has lights. My question is how will it pull behind a half ton pickup, will it...

I'm considering a cab for my Case DX40, was wondering what people are paying, and how satisfied they are with them. I looked at the Curtis website but they don't show interior or explain how to mount the cab. Would there be a lot of drilling involved? Are they hard to remove for the summer if...

Just used my Ford 501 sickle mower behind my new DX40 for the first time. I had one heck of a time sliding the shaft onto the tractor. I finally tapped it on with a hammer but could not get it on all the way. I mowed ditches without it being on all the way, stopped and checked it once in a...

I went over to the neighbors today to see if I could borrow his six foot tiller, I work for him in the fall, so figured no problem, which it wasn't. Except his tiller was hooked up to his Agco ST41 tractor. So he says just take tractor and all, that way you won't have to unhook the tiller...

There is a new take off loader for a boomer tractor advertised on Craigs list for $2550 it is in Bloomer Wisconsin if anyone is looking.

Does Bobcat make a cab tractor in the 30 to 40 HP? If so does anyone know the height to the top of the cab and also prices? Thinking about a cab tractor I have an eight foot door. Thanks.

There is a Fimco three point sprayer advertised locally for $425.00. It is a model LG 60 with a 12 foot folding boom with a pto driven pump, the guy says it is 2 years old. I have no experience at all with sprayers other than the hand held pump type, I have about 1 and a half acres of lawn I...

Just wondering if anyone has had any major fading with the plastic body parts on any of the Case compacts. Seems like all the used ones I've seen are still a nice bright red. Seems to me I've seen some fading in the New Holland blue on some compacts, don't know what year tractor though. Don't...

I see Deutz has differential lock on both axles on their smaller tractors, not sure on the larger ones. Sounds like a nice feature, do any of the other compact lines offer this? How are the Deutz compacts? Anybody own one? JJ

If you get stuck in mud with a hydro is it harder to get out than with a gear shift? It seems to me that it would be harder to rock the tractor in order to get momentum working for you, especially when you let off the pedal it is like putting on the brakes. I have a hydro, just haven't had a...

Got it on Thursday afternoon. My wife took a few pictures before it got dirty, she is so proud of it, she put it on her screen saver at work. I ordered a rear blade from a different dealer. Just so happened he delivered it the same evening the tractor arrived. The blade is a bush hog...

Dealer called today, they will be delivering the tractor tomorrow. I won't be home when it arrives, but he will meet me at four pm to go over all details. I will try to get some pictures before it gets too dirty. Looks like a vacation day is in order for Friday. Glad I got a good nights sleep...

Looking at a Bush Hog 70-07 rear blade for my tractor. It is a 7 foot blade with tilt and angle. Does anyone own one? If so how do you like it? I'm getting a Case DX 40 four wheel drive tractor. For those not familiar that is a 40 engine horse tractor. Is this a good blade for general...

How smooth are the hydro's on these tractors? I test drove a New Holland 45 horse, seemed to whine kind of noisily and a bit jerky. Are they better when they get some hours on? To get the features I like I guess I will have to get a hydro.

Stopped at a John Deere dealer today. They were closed but they had a 2003 DX 45 Case with grille guard and front end loader It had 600 plus hours ag tires with some wear more noticeably on the front. The control knobs looked weathered like it sat outside a fair amount, with no visible oil...

I am looking at the 2310 the question is I haven't seen one in a shuttle shift. The hydro comes with telescopic links, tilt and telescoping wheel and swivel seat. I looked at Case and the shuttle shift does not include these options you can get the adjustable links but not the seat or the...

I have been looking at the Agco st34 for a few years now, I really like the power shuttle transmission. I know Massey makes a similar tractor. A dealer told me it is getting hard to get the st's. Is this true? If it is is it the same way with Massey? I haven't talked to my local dealer...