Search results

The pump well fit the B2710, B2910, B3200, and B7800. It came off a engine that was striped down to use on a 18 wheeled trailer for ref. I got the clutch and pressure plate at the same time I got the pump. I was told the engine had a little over 50 hrs when taken off. By the looks of the clutch...

How do I set things to flag me on threads I have posted in? It is alerting me when someone has posted in threads I have read and I would like to stop that.

Got a new LX2610 with 2 remotes and the way they are mounted wasn't going to get. I changed and well show you how I did it with a list of parts. All the fitting are from discount hyd. 4 X 9058-06-06 bspp 45 deg 2 X 2501-06-04 90 deg 2 X 2501L-06-04 90 deg The 4 ag coupler came with the...

Been wanting to put better suspension for the seat from the time I got it. My land is bumpy and this helps out a lot. I also put the new seat that a few of the guys got a while back, the seat is better then the one that came on it. Take a look at the deck. I put them on and only had to...

Fuel injection pumps with there own oil bath, what oil are you using in it ?

I went to twin cyls. on my Bx2660 and I have the bucket cyl. to sell. I know for sure there one hose, maybe 2 asking $200.00 for them. This cyl well fit a lot of the loaders. Part #7J612-64013 check it out.

I put fuel in my BX2660 and the fuel nozzle was full of lady bugs. This was 1 1/2 years ago. After cleaning tank it ran good until this year. There must of been 3 to 6 I didn't get out. Had to pull mower off and blow back into tank, removed 2 or 3 bugs. Ran good for about a week then had to do...

If you have to ever have to split your tractor to get to or near the hydrostatic drive. Change the neutral holding bearing, other wise you have to do some grinding to get off. The bearing is real small about the size of a nickel and check around on price, it's all over the place. Kubota part...

A friend has a JD 4120 and he me asking me if he had a screen in the rear end for the hyd oil. I couldn't tell him if it did or not. Can someone please help us out? Thanks, Lee

This is a update on this post. http://www.tractorbynet.com/forums/owning-operating/372943-splitting-kubota-gl4240hst-4wd.html?highlight= I found out after replacing the 4wd and input shaft seals 3 times and with the latest seals and housing. Don't over look keeping the Hyd front cooler clean, I...

I have been all over the net and can't find a place that well let you look at the parts manual. Can anyone put me on a sit that lets you look up parts? It's a Stihl MS361 and also does anyone know the air gap between the ignition module and flywheel. I have been from .004 to .011 and can only...

Got a good start putting twin cyls on my BX2660 this week.

BAS8N wanted to see my set up for my B7800 and I could not see how to add picture in the PM. I have show some of this before so it's mostly for BAS8N, but maybe you might pickup some ideals. Picture #1 & 2 is the plate for the valve. The valve on there now was changed to a 2 spool late. The...

I have tried to copy the parts drawings and the pictures will not show up. The numbers show thats all, can anyone tell me how to get them to show up?

This thread is going out in 2 parts. The tractor is a 2007 and at 550 hrs 5-14-10 the in put shaft seal to the hst trans was replaced under warranty. Got it back and at 756 hrs it started leaking again so said I well fix this time and maybe find out why. Well when I got it apart the seal was...

There is a JD 200ck loader for sell at Schroon Lake, NY on Govdeals. The loader looks like new, but did not say anything about subframe. The bid is at $368.00 now and only has 19hrs to go. If you can use here is the link. John Deere Tractor Bucket - GovDeals.com

Can anyone tell me if the Case 970's hyds is open center or closed center?

Well done my L4240 last week. Ended up with 260 lbs in each wheel, with loaded tires I have around 1200# on the ground now.

Here you guys are moving snow and I was running my shaker. This is the 2nd shaker I made, the 1st one just wasn't built strong enough and keep coming apart. After fixing it 2 or 3 years I made this one. Ran it monday for 6 hrs for a test run and not one thing went wrong. My L4240 couldn't keep...

The TBN icon changes to a white square blue background with something that looks like a checkmark. It doesn't happen on the home page and it isn't doing it on this page. It also doesn't do it when I look at a picture. The TBN icon well show until the page gets loaded then the checkmark icon pops...

Why is this All times are GMT -5. The time now is 07:11 AM. coming up in the middle or top of page, it's right under the side ads. That at one time was always at the bottom left side above the big blue part I think. If no adds it's at the top. On the general forums the big blue bottom...

I though I would post this and maybe save someone a lot of trouble. I hadn't got fuel for awhile was waiting for the price to come down. When it did I got 500 gals and fueled all my tractors. My BX started to run out of fuel, done all filter changes on all tractors and fuel tank. Checked my...

I have 2007 ford pickup. Can anyone tell me what the sensor is for in the front wheel hubs or front wheel bearings. Thanks Lee

Take a look at this. Sure is a good deal, it has folding roll bar so it has the mid pto. KUBOTA B7800 TRACTOR - GovDeals.com

I have BX2660, can someone with the BX's manual tell me what the fuel pump PSI should be. Thanks, Lee

Seat I. D. Can anyone tell me what the hooks are for on this seat? With them facing fwd has got me. Have ask some old farm boy like me and no one knows.

Cement Wheel Weights Update A while back a guy was trying to put some he made into his wheels, never did find out if he got them in. After seeing that post I though I would give it a shot. Here are some pictures and tomorrow night I well have some pictures of how I did it.

Just got done with my grabber today, just need to paint when it gets warm. This might give you some ideal what to hold the hoses up. Made a oversize curb finder to hold them.

Does the Navy still have a 7th fleet?

The log in needs fixing!!! I have to sign in everytime I open the site. Done the check mark in the box.

Splitting wood today with the BX. Splitter is as big as the BX, no it well not pick it up. Didn't do the trailer today just the pile behind splitter. Started at 10:00AM and stopped at 2:00PM.

I have no ideal where to ask this ? , so I'll try here. Have a westinghouse 1/3 hp, 1725 rpm, 115/230,and style 308P185-A. I have looked on the net and can't find anything. What I need is some ideal how to wire it for 115. Here is a picture of the wires. One looks yellow, but its white...

Boy this sure is getting old. I have a small screen and most of the time only 1/2 of the page shows or the bottom is on top. Sure like reading the post, but can only take so much then I have to leave.

Looking for a head for the 2610, can someone tell me some places to go look? Also I use to have a list that told me what JD was the same as the Yanmar. Have looked on the net and all my old paper work and can't find it, can anyone help there also?

I have a L4240 and need a 12" boom pole on the bucket to lift 400 to 500 lbs. Has anyone used one that long? Thanks Lee

I have been problems for awhile. 1- when clicking back arrow there is a google double click and now WIR_UVS2_ and so on. It's like who or how it's done they want the hits or it's based on what it cost them. 2- The pages only filling up 3/4 full with the 1/4 right side blank. If I refresh most of...

Made this last week. Worked great with the forks, but when I tried to pick up some gravel with the bucket on the back I bent the 1/2" strap for the lower pins. I was thinking I would need a little more room when it came to hooking up so I when 4" long on them. I was wrong because the frame is...

Where do you guys go to look at a parts manual? Does Kioti's web let you look up parts from there parts manual?

I just had to post this one. Best deal I have ever see for a loader. Front end loader

There is a kubota cab off of a B2330, 2010 for sell in Mo. It's listed in the southern, Ill. craigslist for $1200.00. If interested here is the link. Kubota Cab I just looked it up and it's a Curtis cab.

Everyone knows how hard it is to see the oil level on the dip stick. I have a way that is easy, been holding up to post this, but here it goes. This is only for checking not running with it. All it takes is a Bunn coffee maker cleaning tool and a rubber grommet. Bunn has 2 one is short...

I just read Impressive !! MINNESOTA CLYDESDALE and we were taking about the buds clydesdale last week. We was wondering after bud sold out, what did they do with the clydesdales?

I wanted a light side shift rear blade, so I done this. Have to paint now.

Started this yesterday and ready to fit the real anchor.

Can someone tell me if a roller pump is self primering or need head pressure all the time? The ones used on sprayers.

Check this Backhoe out in NC. Might be a good deal. BACKHOE ATTACHMENT - GovDeals.com

Got Hyd top link and made a holder for it. The spring is for not letting it go into the lock up. I unhook the spring when the the top link isn't in use. Just have to paint now.

I"m starting a thread on this because I didn't want to highjack another thread. I asked about this and was given a link, but it didn't help me. Can you get down pressure on a 3pt? I guess there are some tractors that has it,but I have never seen it.

I have to replace the clutch bearing. Just thought you guys might want see some more pictures. This is my 1st time and everything is going good. The loader frame had 32 bolts holding it on, over kill and it's heavy.

My stall guard drops way down in rpm before it kicks in. Like down to 1500 rpm's from 2600. My ? is has anyone had there ECU reset and how much does your's drop in rpm. It has always been this way, but starting to get to me. Come to think about it, it only was dropping from hi to lo in the...

Back in June 2010 I made a rag top just to see if I would like one. Well I did and I made one. You can see how the legs are made and how I hooked them to the tractor. Also the inside of the top. It bolts on and if I sell the tractor I can just unbolt and put the oem rop back on...

These are the upgrades or customiza I have done to my BX. You might of seen some of them before, but I thought I would put them into one post. #1 is the bracket for useing chains and a small boom pole. #2 & 3 are the front bumper with chain holders. #4, 5, 6, & 7 is the skid plate and how it...

I was wondering why people don't fill in there profile???

For the guys looking for a used fuel tank and pumps. I have watched this site for over a year and have seen some nice fuel tanks sell real cheap. You just have to watch it for when one comes up close by. Here is the link for a nice looking gas boy. GovDeals.com - Government Surplus Auctions...

This is the step I made today for the old woman. It is removable by removing one bolt and it slides in and out. Right now it's all the way out. I wanted it smaller and she wanted it wide, I lost. The only thing lacking on her tractor is a hyd. top link, wheel spacers and maybe adjustable lower...

Tried to do a update to my other thread and couldn't find a way to do it, so I started a new one. Got this painted yesterday and put on today. I forgot to grind the bottom a little rounder before I painted, well have to do it later. The loader storage legs just touch when the loader is all...

I have the thread going (Did a couple more things to my BX2660) and was asked to post pic of the tool box I wanted to make. Here they are..

Did a couple more things to my BX2660 to fit my needs a little better. It came with a lawn mower trailer hitch, so I made a draw bar like the big boys have. Also I didn't like unhatching the seat every time I had to lift it up. The hatch is there because the seat belt hooks to the...

Just got these done today. I also redone the left lift arm, It wasn't made just right. In the next to last picture you can see my buddy, she is always right next to me. The last picture is me and her.

Just got a BX2660 and when driving I could fell and hear a popping coming from the front axle. I raised the front end off the ground and could not move the wheels up or down. I took the pivot bolt nut loose, had to use a 1/2" bracker bar and my leg to get it loose. That thing had to have 250lbs...

It seem like most of the neighbors showed up at the same time for fuel. We were getting ready to start cleaning a fence row the next day in the woods. There is 2 missing from the picture, and a new baby just came into the neighbor hood (a BX2660). Just might be adding one more, a M7040, He's...

How far does your 3pt drop down? Mine well drop until the arm are level. Is that right?? Sure doesn't seem right, I would think they should go close to the ground.

I have looked at a BX2660 with loaded R4 tires, loader,60" MMM, and 1 set of rear remote hyd. The help is on price. I'm getting as much as $2100.00 differents from dealers 60 miles apart. I'm right in the middle of the dealers. The highest is $17,401.00 and the lowest is $15,240.00. What are...

At what RPM does you Hyd. Plus Trans. start working when you are using the Stall Guard. Also can it be changed? My engine rpm drops way down before it well start working. Now I'm not talking about the Auto-Throttle Advance, I changed that. Thanks, Lee

I'm 1/2 done with making new 3pt arms. I like the sliders on my L4240, so I thought I would make some for my B7800. Waiting on the weld on ball ends right now, then the other one well get done and painted. Couldn't wait until I was done to post the pictures.

Two more interesting photos. These two I don't have any ideal what it is. It was right next to the road and about 8 to 10" in dia. and was gone 2 days later. It was also kind of hard.

For the life of me I can't pull up a members photo albums. There should me a link in there profile. I sure would like to look at there pictures as I'm looking at there profile.

I just got, but not used yet, a Pro-Flex 120 Contour Mower and wanting to know if anyone has used one? Or watch one being used? Also what did you think about it?

Why is it when I hit back up arrow it loads something,but there isn't anything there. If I hit my drop down arrow to back up this is there Http:/d1.openx.org/afr.php?n=ac6459a6& the part after the = is different , but the front part is the same. What is it????

My brother made this last week and we tried it out today to see what kind of bugs need to be worked out. It ended up working real good and the only bugs were, needs sides on each side on top and bottom grades, and a guard over the motor. The bottom half well be closed in on 3 sides and it well...

I have a B7800 with the V1505E engine, casting # on block is V1505D. Family 3KBXL01.58CDECS:EM. The crankshaft pulley doesn"t have the 3 holes for pulling it. I'm looking for the pulley that I can bolt a shaft too. The older B6100,B7100, B7200, and ect. have the shaft I'm trying to bolt to...

This is my ballast box, wood hauler, and tool hauler. I use sand for ballast and dump it when not needed. I well be adding a chain saw holder and log roller.(forgot what they are called). I'm not sure if I well be putting a receiver hitch on yet. I made 3 of them all at the same time. They...

Just one of the things I have been making on the days when you don't feel like doing the things I should be doing. Been playing with it for about 4 weeks off and on. Still have some welding to do on it and have to pull the tractor apart to get all the bolts in. I'm going to use 1.5"...

What are the savings in taxes from on road to off road for your state? I checked one of oil dealers here and his was only $.13 and that sure doesn't seem right. I live in SE Missouri. Thanks for any input, Lee

For the guys that have no clearance with the R4 tires. You might want to do this, its real easy and saves $$$ too. I was going to make some spacers but after looking at the flange of the front hub I didn't think it could handle the longer studs. The flange is right around 1/4" and sure wouldn't...

Has anyone came up with a way to keep the dirt and mud from getting packed up inside the loader booms? I know about digging it out. I'm afraid that I will forget to clean and water get trapped in them and winter is a coming. Lee