Search results

Results 1 to 20 of 20
  1. Carl_NH

    NH Auction for L35TLB 825 Hrs

    My wife gets auction listings and she found this yesterday. If anyone is looking for a decent L35 TLB here's for sale locally - looked at it yesterday - runs fine and dry - no leaks at any seals or underneath. Just needs a pressure wash - dusty but otherwise very good shape. 1997 Kubota...
  2. Carl_NH

    NH Auction Price L4330HST

    Attended the JSJ auction in Epping NH today. The L4330 HST with Cab, HD QA bucket, and two rear remotes with 317 hours sold for $22,000. This did have the subframe BH mount too for the Woods 80 BH. The same buyer bought the Woods BH for $5500. Total package with the BH was $27,500. They had...
  3. Carl_NH

    Gravely L8 Super Convertible in my barn!

    Friend of mine had this for sale - picked up Saturday took a trial run about and everything works great! Spent today cleaning up grease and oil off the transmission area and geting to know this machine and doing some cleanup. Its a 1972 model, got all the manuals and repair / maintenance...
  4. Carl_NH

    Installed Hydro Transmission Cooler On Zero Turn & Results

    Installed a B&M 70255 Transmission cooler on my Ferris IS2000 25/52 today. Unit has 60 houes total on it in two years (residential use). I was concerned about the operatinig temp 180* @ 75* ambient and the fact the Ferris has added these to the IS3100 this year (and all bigger machines IS5100...
  5. Carl_NH

    Good DIY Submersible Pump & Parts Sources

    I have been sourcing Goulds pump and Franklin motor components for my backup spare pump. Long story short, I have a 10 Y/O goulds 10GS pump end and needed a 1.5HP two wire Franklin motor. Best price I could find was $346 here Pond Pump Motors plus $25 shipping. Received the motor in 3 days...
  6. Carl_NH

    Static Water Level in Well - Stone Drop Method

    Saturday AM - could not figure out why irrigation didnt run... Hmm took cap off well and can hear the pump running even tho I thought there was no water being drawn, so dropped a stone to check the water level - 15 seconds or about 350' is static level - this is lowest I have ever seen. Long...
  7. Carl_NH

    Goulds or Meyers 1 HP Submersible Pump

    Currently we have a 1.5 HP 10GS15 2 Wire Goulds pump set at 360',(total depth 400') static water level varies from 85-150' depending on time of year (we have 14 zones irrigation). The well flow rate is 10GPM + and we have never ran out of water. We had this well drilled in 97 and installed the...
  8. Carl_NH

    Lincoln Ranger 8 Generator $ & Best Solution

    Hi all, First I would like a welder for occasional use repairs, making some gates etc (had a Lincoln 225 on the farm), and could use a backup generator larger than my present genset of 5700 W 24 AMP 220V. I only have 20A 220V (two 110 circuits) in barn for running lights and tools where I...
  9. Carl_NH

    Stumping & Clearing Project Estimates

    All, I have several acres of pine stumps and ledge - probably 35 - 30"+ stumps and 25 stumps in the 15-20" range. Ledge and rock 4-6' in size also need to be realigned to reclaim the land to replant trees and generally reclaim the area after this years storms. Land is reasonably flat, no...
  10. Carl_NH

    Sunstrand Hydro - Squeals like a pig - SUDT - Or?

    Cub 1811 650 hrs - owned since new - always have had Hydro whine and some squeal but did a Cub Hydro filter and oil replacement with Kubota SUDT (new - left over from my B21) recently and now when hot it has the hydro whine but also sounds like air passing thru the valves - squeals like a pig...
  11. Carl_NH

    B21 Front Ramsplitter Setup

    Its wood time again in NH and here are some shots of my set up - a front mounted splitter from Doug @ Ramsplitter modified from the normal 3PTH set up, Legs were added to the normal unit along with 15' hoses so I can keep the BH attached as well easily R&R the splitter. I can hook this up in...
  12. Carl_NH

    SUDT 2.5 gal Container Seal?

    Does the SUDT 2.5 Gal container have just the paper/plastic seal or is there a permanent foil type seal and the paper/plastic cap seal? The reason for asking is i purchased three containers online (dealer) for $62 each incl shipping and thought it odd there wasn't a peel off foil type seal...
  13. Carl_NH

    Bobcat Den & What to Do

    As I am writing this (wireless works to 300+'!!) I wait for the reemergence of the bobcat that has made a den behind the barn in an area several years ago we filled with rocks and stumps. Earlier today the Bobcat and I stared each other down for 5 minutes then she disappeared. So I got the...
  14. Carl_NH

    B7800 Decision -Bradco or Woods BH & MMM Conflict?

    Helping a cousin in CT spend some $ this weekend looking for the best setup for their needs. - Brush clearing, moving rocks and some BH work weekly (for next 12 Mos) - Mowing weekly - Small stump removal - 6-9" Typ - Landscaping trenching and finish grading in 2003 - Plantings, Lawn...
  15. Carl_NH

    One Big Scoop (Thks to Harv and others)

    Here are several shots of the big scoop I made thanks to Harv's post One Large Scoop Please, and other comments and feedback from that post. Essentially this is 2" angle iron with 3/4" plywood base. The 1/2" pins with quick clips go through the angle iron and bucket sides. The 5/8" plywood...
  16. Carl_NH

    Painted Hyd Cylinders = Leaks

    Inspect your hydraulic cylinder rods for paint before extensive use, as I now have a second leak on a cylinder which is due to O rings missing during the paint process. They are supposed to put o rings on the retracted cylinder to protect the paint/seal interface on all cylinders. My LF bucket...
  17. Carl_NH

    Shut Down or Leave it Running Loading FEL

    Just wondering the opinion of shutting down the tractor while loading debris and rocks into the FEL bucket. This weekend had the task to rip up pavement, came out in nice big chunks then used a sledge to break them apart in the bucket The load time was about 10 min I left the tractor running...
  18. Carl_NH

    Blue Book/NADA For CUT's

    Blue Book/NADA For CUT\'s I have viewed several forums for tractor pricing and resale values, however cannot seem to find a universal guide that fits the ticket for the CUT market. In addition, it would be interesting to determine what the potential resale values will be 2-5-10 and maybe even...
  19. Carl_NH

    ZTR-Cub Frt Wheel Conversion

    Anyone out there that has converted a std Cub rider to a tighter turning radius. Would seem to be possible with a conversion kit for the front spindles.. I have a Cadet 18HP Kohler Hydro- Trans & Lift w/44" mower. Carl
  20. Carl_NH

    Deer Control Options

    I have recently installed a 600' L x 8' H "Deer Fence II" around the perimeter of the yard in the wooded portion of the property with exception that is about 100' bordering our neighbors property with few trees to attach the material. This portion also abuts or joins their fence line (cedar 4')...
Top