Search results

these are two of the breakdowns of how that goes together on your model

I will need your serial # to get you the proper one, but i do have them available, just shoot me your serial # and i will attach a link to the one you need for your model

you wont find a direct match to the transmission or hst filters, but don't mistake me you will find ones that fit on there but they wont work, the main reason being the size of the bypass in the hyd and hst filters are very important, and are generally nearly twice the size of the industry...

you can see if you look at that attachment some models have multiple options for the filters they used, it can make it difficult to get the correct ones the first time for an inexperienced parts clerk.

the ta00025525a and it variants do in fact fit some of the 4520 models, 5220 models it will depend on the year they were made, the NTB803 Fits only older models pre emissions so generally 2014-16 and before probably ntb803, after 2016 definitely going to be the TA00025525A I'm gonna attach a...

was this the fuel lift pump, or the fuel injection pump, without knowing which one it will be hard to pinpoint hat you may need to look at.

the filter # for the hyd oil filters for those models is now a TA00025525C, the oil inlet on the NTB8030000A3 will be of a larger diameter than the newer models use, however looking at my filter chart it does not appear that any of the Branson/TYM models use this filter currently

your absolutely correct i did not read far enough before commenting, see what i get for talking before drinking my coffee lol

definitely not a kioti, those unit are produced by TYM USA for Badboy

https://drive.google.com/file/d/1qoxD82WRnhs6CsihiWsMD7TdTHaU4tU4/view?usp=drive_link - this link should take you to the shop servicing manual for that model and this link should take you to the owners manual - T723 operator manual.pdf the two attached pics will be filter #'s and fluid...

T293HST workshop manual.pdf - This link will take you to the service repair manual for that model it should have all the info you need to repair that seal.

for that year model it should be equipped with either a bl20 loader or a bl20a loader on the right hand side on the right hand side of the loader support( where the loader mounts to the tractor and is pinned(bolted) on, there should be a metal placard that is riveted on this will have the model...

this unit shows a date of sale of 08/16/2018

Heya, so since the launch of the 5835r i have only ever had to do this for one 5835r, and that was during the first year of their production while it possible this could be required it was my understanding this issue was resolved already for the newer year models and thus the 2022 model should...

sorry for the late response been under the weather with the flu, this unit 3820I shows to have been sold on 11/04/2010

Yes Herm this is a supported setup for your tractor

this unit shows a date of sale for 01/30/2015

I would contact the dealer you purchased that from and see what they can do for you, that compressor should have come with the new seals, and if they needed to be ordered the dealer should have made you aware of that when you were buying the new compressor.

serial number shows to belong to a 5220c its a 2015 model

CELD00011 - shows registration to a 5220R, However i do know sometimes these serial Numbers can be very close,( IE CLED00011, or CLED00111) I would recommend taking a picture of the serial # tag by your front axle, send me that pic and i can see what running that # pulls up

If the procedure Boswell shared did not correct your issue, I would start by simply checking the plug on the exhaust like ptsg stated, then if its still blinking turn the tractor off, the go to the exhaust valve near the end of the exhaust pipe, unplug the connector on the back of the exhaust...

Ok from what i was able to find this should be the most accurate version for you tractor.

it show the seals are available to order however they are sold individual piece according to what i can see but these should be the accurate part #'s for them.

as far as we have been told the kpis system was shut down as they are currently in the process of combining the tym and branson legacy units into a single parts look up system, this is why it isn't working for you guys around the first of the second quarter next year we as dealer will be given...

if you've adjusted it as best you can and it still wont go into reverse then there may be extended wear on the shift fork and synchronizer gears, either scenario would require opening the units top case and doing a visual inspection.

OK I have done as much digging as i can but unfortunately i do not have any versions for the euro 25 series, those model ran with bigger engines and slight changes on the chassis, no one at TYM/Branson has a copy for the euro versions, your best bet would be to reach out to a euro dealer or...

the part # for that one is HM50260000a9, price is going to vary by dealer but most will have this price around 400-450ish + shipping cost, rome, Ga shows to have 44 in stock there so this should be all you need to get you one on the way.

Afternoon Ace, first steps will be to determine which style of fuel shutoff is present on your tractor then we can determine price as for availability it does show both versions currently available through the Rome, Ga location.

Tyler, tx is still the assembly center for the legacy branson equipment, however the TYM (T) variant models are assembled in Caldwell, tx

ok i didn't have a copy of this but i have requested one from the factory once they send it over to me i'll attach a link to it on here.

i believe i have this somewhere let me look through my files i dont think i put this in the google drive file.

After doing a bit of research on this, it seems form some other forum posts the have been people who have had this same issue, and for them it ended up being a clutch pedal issue, basically there wasn't enough free play from the clutch pedal engagement, when you depress your clutch engagement...

this sounds like your tripping a safety switch, most common on that model is the hst pedals not properly returning to the neutral position or the pto lever is engaged (even if it look like it isn't move it into gear then back out)

30 series-chassis.pdf i have a chassis manual for this but it covers all of the 30 series

nope i linked the wrong file here is the correct one my apologizes, lol its been a long day here. this should be the correct manuals https://drive.google.com/drive/folders/1jBXC7K2G7ltCK602jgytY51xPwj1Ys1x?usp=share_link

t293 - Google Drive - if you follow this link it should have all three manuals for this model the shop book, the part book and operator manual

DATE OF registration: 12-06-2017 - 3520h - cwdf00223

4520R - CLRD00268 DATE OF REGISTRATION: shows 2015-09-30

they are reading that info from the fuel injection pumps now.

Don't worry about them this was indeed changed when they changed the dpf system, every 15 & 20 series unit on our lot is setup like this, ptsg is correct in that they used to use this for rpm's and hours, they dont any more.

if i remember correctly these 20 series sight glass are a press in type, you have to remove the outer rear cover for the pto shaft to replace this

this sounds like the fuel stop solenoid on the fuel injection pump, when you energize the key it retracts a stopper pin that when not powered blocks the flow of fuel through the fuel injectors, if this has failed it will not allow fuel through the fuel injectors and into the engine. creating...

standard blade fuses, i don't think any of them have mini fuses in those fuse boxes

unfortunately the EU versions i don't think share the same system, i did try to run your number but it doesn't give me any info about it.

i just wanted to put this out there because the price Eddie was given for that starter had my jaw drop and i sell the tym/bransons, now i know why, the part number he gave use subs to hrd17001usa1 - retail is $763.13 here this is for the kukje model engine its a direct substitute to the number...

a gravley mower suspension seat i got a really good deal on - $150 out the door with it

you'll have to do some hunting online but i have found those solenoids on ebay before, its possible you might be able to as well, ( i shouldn't say this but i'm gonna)as a Branson/TYM Dealer , i would recommend purchasing the oem starter as a last resort they are overpriced for what they are and...

I noticed your model listing states 5520c do you have any lights on in the bottom right hand corner of you meter assembly of your dash? What rpms are you idling at? Can you hear the engagement of the fuel feed pump with the key in power position( should be hearing a repeating clicking sound...

@rasorbackq I've ran that part # and it shows Rome, Ga to have 196 in stock, so they are available, i just don't know how i could get one to you as I've never shipped a part out of country, so i don't know what all that entails, however i was able to run my dealer locator based on the are you...

if you look at the #21 in the diagrams, most often this roll pins have moved out of their position in the swivel joint and are hitting/interfering with the linkage actuating, however i would definitely look over all your linkages there as is a chance you may have damage to the reverser splined...

3T series engine.pdf - this engine service book should have what you need.

here is every wiring diagram i have for that series hope this helps

so we are looking at carrying BXpanded'S new piranha pro reversible tooth bar(you can swap from a flat grader blade to the serrated tooth bar on one product), the reason I'm asking about if this is something people would be interested in is because we only recently started carrying models of 60...

We get asked about restrictors like these all the time what did you end up going with?

aah you beat me to it ptsg, yes i should have been more specific, the new i believe 2014-2015 & up will have the newer caps with the vents and anything before that year range should have the dual tanks with built in vents

BE VERY CAREFUL, the 15/20 series use the cap as the tank vent so which ever you end up using needs to have a vent built into it.

It's really just going to depend on when your was built , we have ha some come in threaded on, and some molded on, if its the molded type you just have to chop it and rethread the end to suite your needs.

and before its asked there's really only one way to fix it and hat involves removing the tire and disassembling the linkage and reinstalling it back into the correct position.

just make sure your following that h pattern religiously.. if you try to shift into the other side( 1-2) to (3-4) too fast you can jump out of the pattern and wedge your linkage, ive fixed 30+ of these since they made the design change in 20, while its not very common it can occur if you're a...

they should all be screw type from 2014 an onward, but i have been surprised before.

https://drive.google.com/file/d/1M8E6DqLO8EAFRNmEFs2a0A7-BjIbC8sX/view?usp=share_link this is the only version i have for that series, it wont be an exact match but it should be close enough to help guide you along

just wondering if any of you guys out here with a 6530c could tell me what group sizing and cca your is using i have a customer out of state from us with one needing a new battery, but for the life of me i cant find the diagrams i had with that info on it, nor do i have one here i can look at...

This tractor retailed on 04/29/2016

ok so i don't know how much help this will be but, i have seen what your describing only one other time in the last 7 years, its was on a 3725c and it was eventually determined to be a sensor misreading, this was still under warranty at the time so we were instructed to replace them, once we...

I have been asking for this from them for over two years, this would make maintaining that regen system so much easier on everyone's part.

easiest way to deal with that style if you cant get it to rev above 2k rpms, is to remove the center section of the filter medium, and first blow it out with compressed air to get the loose particulates, then set the filter in a catch pan and pour clean diesel over it ad let it sit for 30...

https://drive.google.com/file/d/1EmRYEqKJ4WPF2_eFD1_UbEELZOQyxf2Y/view?usp=share_link this should be the correct manual for your model, it will reference the 20 series branson however yours cross to the 3520 branson so it should cover you on most things.

I'M NOT SURE WHICH ONE YOU DOWNLOADED BUT THIS ONE IS THE MOST ACCURATE TO YOUR MODEL https://drive.google.com/file/d/1s8SVzg3IgiY-_wgxQwL7th8nkpJP3Z58/view?usp=share_link

also bear in mind some of these parts are not available any longer so you will probably have to go aftermarket and junkyard rummaging to find parts for this if it needs major repairs in the trans or engine.

Let me save you some trouble, for the century 2045 or branson f4350 there isn't any available for that model, century never made one available to the public as far as I'm aware and that model came out during their transition to branson, so they never made one either. I have ran into this model...

so far just this particular model not that 2015 is old just this unit is old, and according to them the original parts manufactures for this unit for a lot of the components either aren't making the parts or are no longer in business these were the main reason for this decision to stop support...

Unfortunately this will be your only option, if you cant find a dealer with old new stock of this part i would also recommend using Plexiglas. I spoke with the head of the parts departments support arm for us dealers i asked him if this part was currently unavailable, he said no it is not, and...

https://www.youtube.com/playlist?list=PLDFvoAyUOfc99RNYEXcvtvVWb8IyXOA_X link to a playlist i made with all of them in, it should be publicly viewable

standard hydraulic hose and metric fittings you should be able to have one made

this should be the most updated version https://drive.google.com/file/d/1v00-qO8abQAoa3SkUt1thJlFF-Fu9RZJ/view?usp=share_link

Hey @Huckster would you mind sending me the company you used i get stuff like your situation from time to time and would love to be able to give them a direction to go to if i cant get the heads for them.

yea i thought it was weird as well but that's what i was told by the ordering manager from Branson.

just certain engine parts everything else should still be available

ok so its just certain engine parts they can no longer get, about 90% of external and accessory parts( I.E body pieces lights etc) are still available basically if it has to do with they engine don't count your chickens, but everything else should still be accessible for the rest of the unit...

ok so now i know why those parts aren't available anymore, its due to the dang EPA, basically they wont allow branson to import that engine parts ( as well as another model or two) due to them no being able to pass current emission standards. Well that just bothers me, unfortunately your best...

aah i see i guess i misread the original post let me do some digging see what i may be able to find.

I AM THAT TECH... lol I kid but in all seriousness, i don't know why the dealer out of Georgia couldn't help you with this but that head is available as an assembly replacement its just under a different part number as the original cant be obtained due to availability, however the substitute...

I know you already found the solution to your issue but incase anyone else ever needs it we did make this chart for this very reason its a bit simplistic but it gets the job done for us.

well while i don't know of any other place than branson to get a head for that model these will at least help you on your journey to finding the correct one, here is the original part #HRR220C001A9 and the substitute PART # EA00004862A hopefully using these you made at least be able to find one.

just a heads up guys if you loan out your equipment make sure to inform the person your loaning to gasoline doesn't go into a diesel tractor. Edit* just to give context, this unit was brought to us because they couldn't get it to start, well once we were finally able to this was the result, and...

original retail date : 05-28-2010 4720h - CT7R00130

does any other part of your hydraulic system stutter like this? I.E the front end loader or the power steering( with four wheel drive off)? stuttering usually indicates air getting into the system somehow and when the cylinder tries to pressurize it hits and air bubble on the piston head causing...

TIER 4 20 SERIES.pdf this manual should have the info your looking for in it

For the guys here in colder climates, they do make an oil pan heater( like a block heater but for oil pans) that attach via magnets and plugs in to a normal outlet, we've had to install a few of them for our customer up north

for you guys in lower temps they do make a magnetic attaching oil pan warmer that works like a block heater but for the oil pans, we had to install a few on our units that went up north.

PLEASE DO NOT USE 303 BRANDED FLUIDS!!!!, that fluid like K5 said is only for equipment from before 1975 if you put that in your tractor you will find a steady drop in lifting power through your hydraulic system, basically the 303 spec'd oil are far to thin and while they technically wouldn't...

for valve covers, cylinder head, and hydraulic pumps no, those use specific gaskets, for sealing up the trans, hydraulic top cases, rear axles, case to case sealing etc, yes we now you a high temp instant gasket

HAHA ignore how bad those pages are we are still working on them, plan to have it all on the site before the end of the year.

also look into the Perry Co. out of Waco, Tx they are our supplier for canopies, steel on steel with a felt liner, with fully adjustable pitch. i think they retail here for around $575 for the 15 series version, which is a 48"x 60" and paint matched to the branson red, however you can get them...

3T series engine.pdf - this is the engine manual for the century 3045 with the 3t90l engine if you have the 4tne88 engine your not going to find a manual for it unless some other kind person on here happens to have one

@zepsherlock you're absolutely correct the 2020-2023 manual is still in the works, they keep telling us we will have it soon but they've also been saying this for about a year so we will see, i would advise against purchasing that manual as they were probably going to sell you the tier 4 20...

this is usually an indicator of air entering the system somehow, generally its at a fitting that is loose and will need to be tightened down so i would start by having you check those hose connection that feed the 3 point lift, you should be able to see them clearly on the top of the 3 point...

even on the older models the bulb socket should twist out the back and allow you to change out just the bulb

the clicking sound would be the fuel feed pump engaging the relay will make clicking sound but unless your ear is right next to them you wont be able to hear them, i personally would check your ground connection for the dash components

24002510 service manual.pdf - this is the most up to date manual i have for the 00/10 series models

Eddie these are all the tire sizes that were sold with the century 2535/Branson 3510 Ag front: 7-16 Ag rear: 12.4-24 turf style - Lawn/turf front: 27x8.50-15 Lawn/turf rear: 41x14.00-20 IND style 1: - Industrial front: 27x8.50-15 Industrial rear: 15x19.5 IND style 2: -...

there is 10 on the tractor, and 14-16 on the front end loaders 2 on the tie rod ends, , 2 on the front axle supports, 5 on the linkages that pivot the shift levers( you can find them only from underneath the tractor looking up into the undercarriage)) one at the rear for the 3 point shift lever(...

currently Branson has more active dealers but i think the listing for TYM will show you more

To help Ease a few concerns i keep seeing about support for branson following the change over, our dealership and many others don't plan to go anywhere, now nor when the eventually name and color change happen, it would be very silly to assume because the name is changing the network setup to...

keep that radiator and oil cooler screens clean as you can, 2016-2018 had bad air flow around the engines specifically near the radiator area, they still kind of do but its not as bad anymore, if you dont keep these cleaned out that unit will overheat on you in a hurry, but as long as you keep...

they do offer the paint colors in rattle cans but they are proud of them($) I'll list you the part numbers 03156-654771 - gray 03156-654773 - red gray is listed @ $14.71 per can red is listed at $16.84 per can in another post i listed the red paint code so other could have them made but i never...

rustoleum charcoal gray is what we use here but be wary i have bought to of the same cans and the shades were slightly different

3 point bouncing can be the result of a few different things, the most common is air bring sucked it to the rear from at a fitting or hose connection, it will jump because it tries to pressurize the 3 points internal lift cylinder but it hits an air bubble(s) the loses some of its pressure and...

the bh200 subframe will interfere with you accessing your main hydraulic filter, and hst filter. the subframe rail goes in front of the filter you can get them out with in on but it is much easier with it off

haha we deliver slim and actually the way things have been going most of that will be gone by the end of may and restocked by june

Afternoon everyone i wanted to share this as soon as we had one come off the truck, there have been talks coming from branson they were updating the looks and design of the 15 series, i wanted to put up a few picture of how they look. a few things that are different, the shifter knobs were...

the currently used part # for the 20 series rear remote kit assembly with detent feature is #TA00058975A with our company that kit is priced at $1100.00 this price includes labor to install hopefully is will help you price what your looking for a bit more locally

this is the service book for the 3t90l engine that should be in your tractor inside it should have everything you need to keep that engine running wilkja the second link should be a close match to your chassis and help you along there if you ever need it...

the ones most commonly missed are on the center pin supports for the front axle all the rest you should be able to walk around and see, i don't remember on that model if you adjustable 3 point lift arm had one but if it does make you get that one too.

just a few friendly words of advice on that unit, first please use the OEM hydraulic filters even if every other filter you use is aftermarket, the oem filter have a rather large bypass in the bottom that if not present can cause significate damage to the hydraulic systems, your front end loader...

this unit was retailed on 10/25/2013

helpful advice my grandad taught me take a paint marker and draw a line over your lug bolts if they ever move you will be able to visually tell.

streamlining parts may be one reason, but it could also be that they had to change manufacture of that part as they have done that quite often recently to try and keep up the supply of components

i stand corrected that is 1200+ but i did fid out as to why, its not just a muffler there is a DOC in there as well, so think catalytic convertor, so its going to have platinum in it which explains the high cost right now, i did also see they were around 300 this time last year.

that sounds excessively high even for Branson, i'm gonna check this out brb

Afternoon everyone, i couldn't comment until now for legal reasons, but since I'm no longer bound by that agreement with Branson i can inform you guys of what i know to be true. first let me say while this did come as a shock initially once is was explained to me what was actually going to...

ok this type of fuel filter does not have a replaceable element inside its an all in one unit and you replace the whole thing EA00005318A is the branson part number for this filter, as of current i am unaware of a crossover for this, however there could be one out there locally but you will...

i don't recall if you have to make an account to order from them but we have had good luck here using sparex.com to get seats for our tractors that are both comfortable and not to hard on the wallet, the only catch is what they have in stock changes frequently so you have to keep an eye out, but...

this is the official Munsell number and paint code Branson uses for their shade of red, i don't remember if i posted this before but in case anyone want to have a direct match made up RED Munsell # 8.9R 3.5/15.1 paint code BK0026.kj

so i don't have any update as of yet on what they plan to do about this, but I'm in complete agreeance with you guys they never should have launched these units without a way to monitor temps, in my opinion they should preform a service bulletin and update the tach's to one with a monitorable...

ok on the 2022 model you will only want to drill it out to start with and see what effect this has, be forewarned if you do this the light for the dpf will more than likely stay on at all times in the future, it shouldn't effect performance by doing this although you may see a light uptick in...

on your model 5835r just start by drilling about 8-12 1/4" holes through the media in the center section of the filter dont just gut it on your model its a bit more involved with what the ECM and data logger control and i have seen gutting them cause issues( this is the only model thus far that...

engine oil filter - EA00004647A Transmission oil filter - TA00025525B Hst motor filter - TA00043153a these are bransons filter numbers listed for you model 4215CH the engine oil filters you can find a crossover for( you'll have to take the filter up to your local parts store but they should be...

Eric is this the fuel filter that has the red float ring in the bottom of the bowl?

not a problem Broad, the main reason i posted all of these is i know personally how frustrating it can be by having an issue and no documentation to give you any support for the issue your facing so i try to post every manual i come across so others don't have to face that same frustration, my...

as of yet there is no cab model slated to be produced for the 5835 in the 2022 year, however they should from what i was told have the new 7445c model on the market towards the end of April, they do plan to have a cabbed version of the 5835 but right now their priority is the 7445 and getting...

actually the lift capacity is lower on the 15 series due to the loader cylinders being slightly smaller and the loader control valve is completely different these coupled together is what brings the loader lift capacity down to 2200 vs the 2700 the bl200 fel is capable of

the general rule i tell our customer is to go with an 80w90 or 85w140 ( for warmer climates), but do NOT use any 303 branded oils they are just to cheap of an oil and to thin to properly protect the front axle gears, other than that the brand isn't specific so use what you can affordably and...

no your should be a 2011 they general make the tractors in batches every quarter of the year, so yours being sold in the second quarter tells me it should be a 2011 unless it was a hold over stock at the dealer at the time of sale which while possible is generally unlikely, but from what branson...

https://drive.google.com/file/d/1ZPRB3M034aMyPn07OCPa_WxXjkQSiyVW/view?usp=sharing this is for the bm48 and bm54 but should what your looking for

this model is registered with branson as the date of purchase being april 08, 2011

sorry for the late reply ( i was out for a while with covid) i did receive an answer back from branson's president from what he stated the design change was mainly due to supply shortages on the other style of digital dash, basically they had to make due with what they could get ahold of which...

also welcome to TBN and i hope you enjoy your new equipment

i will give you a few things to watch out for as I've seen it a few times over the last three years on the 15 series cabs( yours should have the updated parts already being only a year old), the clutch rod on some of these units have broken before due to fast shifting on the forward an reverse...

ok as of current there is no temp gauge to monitor,( this is such an asinine decision) because Branson switched that style of cab over to an all digital dash the temp only shows up if you get to an overheat state, there is no way to monitor the temp from inside he cab, now I've sent an email to...

i'm looking into this for you guys, should hopefully have an answer shortly about this

as a branson dealer don't buy form any dealership that bad mouths any other, from my experience any dealer willing to bad mouth another only cares about one thing... your money usually once they get that your pushed to the way side. different brands offer different features and competition isn't...

Sorry i would have chimed in sooner had i seen it but yes all of those filter part numbers are for your model. but just incase anyone wants an easy way to copy them 2515R engine - EA00004647a Trans/HYD - TA00025525b fuel - EA00005318a air - hra0500702A9 2515h engine - EA00004647a Trans/HYD -...

Hey Vern, i just checked my Branson parts look up and form what i can tell that is not available through branson however, that particular model is a tym crossover and you may be able to find it through them

ok just let me know and i will see what info i can dig up for you guys on the mid pto operation

Moak what year model is his 2400h it can make a difference on how the mid and rear PTO operate

sorry tex i havent responded sooner, i've been doing the dreaded inventory lol anyway send me the model of your tractor and maybe a picture if you can to the email address i'm going to send you in a private message and i'll see what we cant come up with for you.

to answer your question Torvy, all new 2021-2022+ models with an hst trans will have the hydromax feature, on the older 20 and 15series it was not standard on the hydrostats some had them some didnt, like our 3520h that belongs to the shop while it is an hst it does not have the hyrdomax...

any "premium tractor hydraulic fluid" is what we tell our customers, the only brand i tell them to not use is 303 labeled oils they are just to thin for a branson tractor, that being said there is no specific brand that is required, nor do i know of any special need for an antifoaming agent...

actually it will only make a difference if the tractor has been moved recently, or if the wheels aren't straight, proper procedure is as follows park the tractor on flat level ground, lower your fel and 3 point lift, making sure your fel cylinders are fully retracted in, straighten your wheel...

3520h models and newer models of the 15 & 20 will not have this screen as it would create a restriction because branson puts the hydraulic filter on the suction side of the pumps, PTSG is right on the money with what he said.

K5 your right it does i just put what branson had listed and didnt even equate the two this morning, i'll chock it up to a lack of coffee.

while yours maybe the 22mm branson did use a smaller bolt setup for the front wheel on some 4520r models those smaller ones are a M14 in size

O man we love those piranha bars here wonderful products, btw love your airstream.

* we do not carry tym products currently*, however we did until 2019 when we ended our dealership agreement with them.

Update* so sorry for the delay with this unit we eventually had to have tym get involved because the problem we found was the timing program for the fuel injection pump was not within its set parameters, this was causing too much fuel one one injectors and not enough on others this coupled with...

glad to hear it Dan, i always strive to be helpful if i can.

generally when something like this occurs Branson goes case by case because if something internal failed that caused the exterior parts to fail it would be covered under powertrain warranty, but if its just an externa seal leaking than it probably wouldn't be covered, but i never say yes or no...

well it could be your clutch, but from what your saying it possible the clutch rod broke, i would be hard pressed to say it was the clutch assembly right away as it was working before then just stopped, i would look at your linkages at the clutch pedal and see what may be broken.

just bit of info for you, your century 3040 is equivalent to the branson 4020 not the 4220, this is a common misconception point because of how they named the models at the time, but you will find the 4020 will be a match for your century and there should be info stickied to the top of the...

march 22, 2013 is the registered day of purchase according to Branson, and also apparently the system i use only goes back t 2014 which is why i couldn't pull it up the normal way, so i asked a friend of mine at branson to look it up for me.

that number doesn't pull up in the system, can you double check the number for me, you should find it at the front left hand side of the tractor where the hood meets the frame there will be a metal placard with the serial number engraved on it

Hey Ron, this is ryan with big tex tractors in Texas, I'm hunting for a particular part for an a/c job and wanted to see if you might have one on hand and how much it might be. part # is TA00020686a - control unit A/C, if you have one on hand please can you let me know, i don't have one and Rome...

high temp silicone gasket maker is what currently being used to make these hub gaskets for the front axles

that should be the same as the branson 4020 model and the manual for it is this one i believe 10-20 Series service manual.pdf - limited servicing manual 4220.pdf - part book

Denjen i posted the new updated 15 series service manual last week this will include your model and all 15series cabs and should have a pretty through section on your hvac hahah nvm i should read more of the page before responding sometimes i didnt see your post about them getting the manual lol

i have a program i can look up Branson Serial Numbers, most dealers will have this if they preform warranty work on Branson's.

We still appreciate the offer none the less always nice to have other people on here looking out for others as well Denjen

I'll check my DM but it may be the same as the one i edited the post with earlier this week

According to branson your tractor's date of purchase is 04/13/2015,

this is everything i could find on that model of back hoe i dont know if it will help you but its worth posting for you none the less Digging Depth 103.2 in Reach from Center Line of Swing Pivot 134.4 in Loading Height 92.4 in Swing Arc 180 degrees Transportation Height (maximum) 91.2...

for the range shifter linkage its connected to the shift lever via a roll pin style connection unfortunately there isn't really much that can be done to make that smoother, as for the pedals not returning to neutral there is a turnbuckle linkage just underneath the tractor where the pedals come...

at 100 hours should only be your engine oil + filter, other than greasing he zerks that should be all that required to service at this interval

This is the branson paint code I've had this PDF for a bit now never thought about posting it here for you guys, sorry lol better late than never i suppose. this will only have the red or dark blue paint code ( the dark blue is used overseas not needed here in the US)

i cant pinpoint exactly but i can say based on the serial numbers i was given it would be mid 2019- to mid 2020

I have to agree with you, looking over the post and what happened i would think that was strictly a defective line, and the dealer you talked to is right on the money if you had a pressure spike a hose or even the pump seal should have blown before that metal line, and with it being covered by...

Ok so i can clear up one thing for you guys, the last letter A,B,C or the last letter and number combo - A3, B3, C3 etc those are indicators that the part has been updated by branson its not a well known fact but they use to indicate to the parts guys and service guys that they have made a...

Yes a few things, the DPF or diesel particulate filter( emissions filter) does not have a manual regen setting, this filter style works very much like a catalytic convertor on an automotive vehicle, it uses the heat from the exhaust to keep itself clean, so when your running it and putting it...

Nah he can try resetting the system first before he gets his dealer involved, with in the first 5 seconds of turning the key the the on position only, depress the regen switch rapidly 5-7 times this should reset the regen and allow to preform the regen process again.

Sooner if your near the DFW area check with Crawford-smith in Greenville, Tx that's where i send people for tires as Branson wants extortion prices for theirs.

i have seen this a few time my guesstimate would be the shifter linkage wedged itself preventing you from engaging the shifter fork in the trans, this unfortunately has been an issue decently with how they designed the linkage to move it allows the linkage to have a bit to much of side to side...

this is one of those few things that branson never got around to doing, it was something they had initially on releasing but after the 25 series failed in the U.S market they just kinda forgot about it. I've had many customer call and ask us bout it but Like K5 said your best best is to go after...

John more than likely the hood release latch has come undone from the linkage and spring, what year model is your 3520? 2014-2016, or 2017-2019 if the older version you should be able to have enough room to take a long flat head screw driver and slide it just under the front lip of where the...

Branson is planning to make a Cab version of the 5835 model, they are also planning on making a few other hp models in the 35 series( they are still TBD but i've heard about a 6535 being in the works)

Lou i have sent out an email to some of the guys i know at Branson i'll let you know what i find out.

is an actual assembly plant, they get in rolling chassis, they install everything else not present on the chassis in Tyler now, basically everything from the harness and on is done in tyler now, I do know that for the west coast next year they are going to be making major improvement to the...

hmm i'm not sure, what exactly are you looking for software wise Lou, i can ask about it if you can tell me what your looking for.

So they opened the Tyler, tx plant this year in February i believe, as a newer, larger, and more updated facility, to better server the build process, as for Plainview plant is as far i know no longer a distribution warehouse but are still apart of the Branson family as a dealer, From what i...

not as of yet ( i know 8 months in and no service manual is awful, but from what they have been telling me this new manual is going to be very large even larger then the older ones)

cougsfan this was actually one of their biggest talking points in our last national dealer meeting, Branson is very aware of the potentiality of computer availabilities in the future and are doing their best to keep from using them at all if they can, however with the 5835R and it being an...

I try my best, no one likes being left in he wind when they have an issue, so when I'm able i come on here to provide advice if I've dealt with it before

Ok so i have seen this personally in my shop twice now, you will need to contact your dealer and have them get them information from branson about having your TCH and data logger reprogrammed, so what happening the engagement parameters in the TCU for the wet clutch have forgotten its...

i went through and double checked it was all set to anyone can view and download not sure what happened but you should be good to go now.

Moving Rock And gravel are exactly what the FEL is designed for, as long as you don't overload the bucket you should have no excess wear on the FEL, as for the jobs you wanting to do with i don't see why it wouldn't work for you needs being smaller and more compact in design it would be near...

If I'm not mistaken the 15 series manual should be the same as the F series

Ok so engine oil and fuel filters you can definitely use different brands beside the oem they really aren't going to effect flow rates of lubrication of the internal engine components, but on the hydraulic you have to use a Branson filter i have personally tried 5 different types of non oem...

we sold quiet a few of them as well never really had a problem except for lack of maintenance issues, and a few people thinking the little guys were bulldozers but they are pretty solid little tractors great for tight spaces and small farm and garden work.

no slight taken at all Rick, i know Branson was not very through with their old manuals i'll hit up Branson to see if i can get ahold of a better version of the wiring diagrams for you i'll let you know if i can come up with something a bit more accurate.

dang ya'll actually got hands on a 4225 we couldnt even get one in the store( why i said we only had one model)i guess that was also a part of it, i just hope this new 35 series doesnt go the same way Branson really needs a model above 58hp