Search results

I am in a FB tractor group and LogOx promotes the crap out of it. I am not disappointed I bought it. Used it alot since I bought it

Yeah marketing is what got me lol. I like it alot but never used a pickaroon so I can't compare it. I guess like any thing if it works use it

Have you seen the LogOx hauler?

Yeah I like mine too. Usually hesitant about things like this but this works great. Thats why I had you check it out ...

Thank you Chewwy

Not got that far into it. Figure there should be a switch to let the dash know what position the lever was in

Its the GST... has the forward neutral reverse lever up on dash area... then it has like 12 forward and 8 reverse on left hand side of seat. The lights on dash stopped workin to indicate what position the tranny is in

Chewwy.. any idea what group that might be under LOL

Thank you

Hello, Tractor ( L3130 GST) where my horse is boarded had the forward nuetral reverse lights go out on the dash. I am guessing that there is a switch under the dash that indicates the position the lever is in. Where would be a good place to look this part up. TIA MaxLee

Congrats ... your going to enjoy your new toy

Thats odd, I just went on site to see if shipping change for me, but they are out of stock , seem like they go through of lot of it.

Like I said, I noticed a big difference when I change mine using the mobil. Hopefully you will get the same results. Few dealer I seen out there that have on line store. MEI and Nolts seem to popular.

That's great! I bought the Mobil engine oil from them also. Who would of thought you could get this stuff cheap from Lowes LOL

I noticed a big difference with the whine after I used it on the 50 hour service.

https://www.lowes.com/pd/Mobil-Mobil-Del-Tractor-Hydraulic-Fluid-5-Gal/5002182347

Like others have said... winterize the house. Much safer and a lot cheaper. You won't need to worry constanly if the heaters are working.

Just a fyi.. if your looking for Mobile Delvac , check lowes . com out, free delivery and 69.98 5 gal pail. This thread started Dec 2020 and was 50 a pail LOL. I researched every where and this was the cheapest price I could find. Plus extra 5% if you use the lowes CC

Not nuts switch to Kioti... but I would look into the CK2620 , 3 ramge hyd, better lifting and much bigger framed tractor. Comes in cab also and still much cheaper then the others you been looking at

Tell them to hurry up so you can get it home and play with it! I would be freaking out if my new tractor was ready to roll and it wasn't in my yard LOL.

Just did a search and they seem to be going for 40 to 50 around here. I will on be on the look out now

You can add the 3rd function then add a thumb to the bucket, I did that for many years. Bought new tractor and added the grapple into the price because of the 0% interest. Sometimes I miss the thumb on my bucket

I guess I need to keep my eyes open better. I read that a tote will hold 1/3 of a cord? Not sure about that. If that is accurate then then I figure I would need 21 of them to satisfy my needs. I get a logging truck load and it usually 7-8 cord of wood stacked tight. Be so much easier to fill the...

Those totes are hard to find around my area. If they have them they want big money for them.

On my CK I have 2 remotes, one detent set (A/B) and one spring set (C/D). Not sure kioti offers additional remotes. I am sure a place like MIE or another aftermarket supplier would have something for you

Funny how after years of firewood experince we know what is good and what isn't. We all want that perfect easy to split long LOL. Good looking log that you did get for free thou

You can get the 2620 and turn screw up to get close to the 3520. No screwing around with ecm and not regen crap. I am happey with the 2620, no issue with power etc. Just depends on what yopu want to do and what horse power will it take to do it

you can make the 2620 a 3520 with the turn of a screw

I been researching this for a while now. I have a ck2620 with Pats QA whichs adds just shy of 4" on to 3pt. I did what others provided links to on here and measure what each C to C for each attachment is. They are all in the 25" +/- range. I also shortened and extended the OEM , which was 18 to...

Mine was 9k with 16" bucket in April this year, included the rear remotes. Hope mine last 20 years

Before I bought my compact with the BH I figure after 35 days at the current price at the time my back hoe would be paid for. 1/2 way there with 1 summer completed. Plus its used for other projects you would rent a BH for

Interesting , I didn't know these existed so I made my own ... primitive looking compared to this tho

I bought this in the spring, used all the attachments and BH alot. I know it limits, it very versatile , can do a lot of things with it. and I did add the hydrailic thumb to the BH bucket :) Something like this would serve the OP for a long time.

I was skeptical.. bought it and use it every time I cut/split wood. I just got the one piece for lifting, use my grapple or back hoe for the bigger stuff

I like my tractor mounted back hoe not a pain at all.. does a lot of work for me since I have had it. I can put it on and off less then 5 mins. I have taken 10 stumps out this summer among many other things, no issues at all... Ya know the best thing , the cost is included in my tractor...

If ya loaded with cash buy both, if not , get the tractor with BH and add attacments. Back hoe alone is not versatile enough for your intented use

takes 5 mins to remove and install back hoe on compact tractor.

Working on fire wood for next season

Should be to much to build a platform to set splitter on , misunderstood what was causing the back pain. The heavy rounds I use the grapple too. For the logs, I grab with the bh and bring up to waist height. I bought new tractor this spring and it all was thought out to process my firewood among...

Take a look at the LogOx hauler, Helps out a lot I was surprised

I bought a LogOx hauler, works great , no more bending over for the rounds.

I have Lopi, glass held in with a steel frame , Then the gasket gets glued in with cement on the perimeter of the door.

LOL, I stay a way from them. I get mine on amazon. Just need to know the thickness. I like to buy local but the place I bought stove wanted 2x what I paid for it. I don't like being bent over

They say close door with a dollar bill between it and stove... if pulls out easy time for new gasket. I change my every couple years if it needs it or not

Been burner for 23 years... best I found was Easy Off oven cleaner, spray on , let sit few minutes and clean as the day I installed it.

I heat my garage/work shop with propane. Also use propane for the gas range and cloth dryer. I have 4 100# tanks. My locale propane dealer delivers to me , I make sure that I have 3 tanks for him to fill each time. I keep track of the one for the domestic use, will rotate that with others so it...

I missed the seatbelt part. I agree with you holding her be a good idea. I am very saftey wise , maybe to much sometimes.

Seat belt? Maybe?

If your doing cruise and linked pedal do both at same time. Steering wheel and console have to come off and the right side floor panel. Easy on open station not sure on cab model. Those labor cost are crazy, especially since they have it all apart to do one but charge like each install is seperate.

Thats the best thing about forums like this, lots of smart guys and they are willing to help people out.

Thats great to hear, thanks for letting everyone know your up and running

Jump the starter

I had a 2013 2410, you should beable to see the fuel in the filter. Correct? If I recall you will hear clicking when the key is in the run position, thats the pump. Is there clicking Pull fuel line after pump and see if fuel is pumping out.

OK, i have a stihl saw so might as well use the stihl files

Kilz the way to go

I need to get a good file set up for sharpening my chains, what do you recommend

So cool xfaxman , I started reding this post and said wow this is from 2019, then I click up to now . Glad to see your doing well and hope your feeling good. I am going to do some research on this food grade DE , I am curious. I have use the DE stuff that suppose keep tic's off horses etc.

Got my 42" from express steel roughly same price but made in america

Glad that your ok. The only close call I have had is ripping my pants on my tigh with the saw. I looked down and was sick to my stomach just thinking what of could of been. Got home and first thing I did was order chap and a saftey helmet. Scared the crap out of me. I am no tree cutting guy, but...

If there is a will theres a way... just have to make sure its a safe way

Question is???? Is the tree held up by the trees around it? Or it the split part still strong enough to keep it in the air? I would rope it and give it a few tugs with tractor and see what it does. From a distance of course

Neat Idea... that will give ya work LOL.

Local farmer isn't with us anymore more because of a widow maker. I have that entrenched in my head.

Doesnt hurt to try pulling it down , that way your not under it. Let us know how you make out.

Widow maker. Any way to get to the trees that are holding it up? Clear a path and try to get rope on the far end and pull it down with tractor? Neighbor has acres of woods with oak trees 1/2 down like this. Many up rooted 1/2 over on surrounding trees. All I see is many years of free firewood...

So you ran a cable off the + side battery to the + side of the solenoid and she cranks right over. Not sure if the same but on my 2620 the + cable runs directly to starter. I would start by replacing that cable.

Congrats !!! I got same one with a few extra's also added Woodmax vm80m , ratchet rake and ES attacment pallet forks coming tomorrow

Many many years ago I fish like that with my uncle , cousine and dad. I was a young boy back then. They would scare the crap out of me! Some times we fish along the canal and my dad would say get up the hill when he seen one of these monster coming because it be like a tidal wave when they went...

LOL, damn Korean can't keep anything simple. I will say this CK2620 is a beast so far, haven't done a whole lot but it seems stout. Could be cause I am coming from the CS2410 lol. I looked back at some post from 2013 and guys told me to get a bigger then I need tractor, well 10 yrs later I...

Thank you fishbone, I tried to get everything in the package for the financing. things I could get are MEI hydro thumb on order and I decided to get the woodmax WM-8M chipper.

Yes it does... but plus side is the 0% / 84 financing , takes the sting out of the buying pleasure

LOL, there are a few changes to new and shiny CK2620. But everything goes up in cost, look at the price of eggs :):)

Correct, no more CK2610 unless you can find a left over on a dealer lot. All CH26XX are now CK2620. LED lights, new hood design and 3rd function buttons on the loader control stick. The 3rd function is an add, the wires are there to plug into the valve solenoid. Price increase yes. They were...

Thank you JS

Thank you :) Your right, looking around property I am thinking I can do this and I can do that LOL.

I will forsure, I just installed pats quick connects that I bought for my old tractor. Had them for 2 years never installed LOL. What a different when hooking up the cutter so I could get it out of the drive way. What a pleasure it was hooking up to cutter , makes it enjoyable now :)

Thank you, I like it also , sharp looking! I had a cs for 10 years with not troubles and I used the little thing pretty hard. This one is a beast compared to that one. Maybe its the spell checker on youir broswer, see if you can add them to the dictionary LOL

Thank you

Thank you :):)

Yes sir, I learned from the last one I bought LOL

Thank you! I had the CS2410 for 10yrs and can say I had no major issue, just some minor stuff. I hope this one will be the same

Thank you !!! Nothing better playing on a new tractor, been 10 yrs for me

Looks like they use one valve unit , all 4 ports and both levers come from same valve body. I didn't think kioti made that type of valve.

Unfortuantly I don't see on either site Kioti parts. I was looking at MIE , going to order the Hydro thumb kit from them

Your correct, 2 buttons with is nice. I got the 3rd function for the grapple. Yes I have a 2nd set of ports, that what caught my attention when I was looking it over. I said hmmm... looky here, I didnt pay attent to the 2nd lever a long the BH a/b lever

where did you get it?

Yeah payment book not here yet.. I traded in and put good chunk cash down. So with the 0% / 84 payments are small. That why I got everything I thought I would need.

Oh , I never mention the word "toy" especially around the wife LOL

Just buzzed up and down driveway. Will do some playing today to feel for everything. Got about 20 stumps to dig out which will keep me busy since I never used a BH

My ck2620 got delivered today, they put the ports on for BH , they have it marked A / B which are detents. Then they have a C / D control that controls a spring back to center. I think they threw the 2nd valve in , because no where is it list on cost break down on the invoice.

Got delivered today... :)

Thank you.. put more pics up once the wheels come in :)

LOL, low profile for going thru the woods easier :rolleyes:

Well 2 dealers in my area said they can't get the CK's in fast enough. What ever they get in is sold before they come off the trucks. The one I bought from had a bunch of cab units sitting on the lot but I wasn't looking for cab. Maybe its the 0% 84 finance

ck this video out from Nolts equipment, show the procedure for the tractors being set up for customer

I agree with you , probably main reason I went with the 2620. The 2610 either sat on dealer lot our down in NC for who knows how long. Hope to have by weekend

I wqs surprised too. Its stripped right down. Not I know why they say find a good dealer. I am also get the 3rd fun, grapple, BH and rotary cutter. They be busy for a couple days I am sure

Thank you :) Getting itchy for it now, snows gone and yard is drying out! Time to get to work

Hello everyone Text my dealer cause I wanted to add a rotory cutter to my package.... he replied with this , said 1 of them is mine they just came off the truck :) Hat tip > H&M Equipment , Amsterdam NY

Nice clean job , looks factory installed

My understanding that they can add another remote that has the spring to return to center. Its a whole new set up. But if the remotes are already there I will just use like you do.

Thank you Yander

Hello all, Well I am up grading my CS2410 to a Ck2610. Pretty much done deal just waiting for her to be shipped and arrive at the dealer. Not sure if this is correct place to ask these question but I will give it a try. I want to get a wood chipper... any reccomendations. Been looking at the...

I always forget about the CX2510

OK, I appreciate the confirmation. I don't see that as a big deal for the rear remotes

Hello ... little behind on this , going to be getting a CK2620 in a few weeks when it comes into dealer. I ask them same question and reply was they don't use the spring rear remote. So what I am getting from reading this post is you just need to use the lever for up or down (in or out) and...

I think its would be the Ck2620, which is new 2023, 2022 was the 2610. My understanding is its the same platform as the CK20. I might be wrong thou ???

with 14 hrs, it be going back to the dealer

I heard this before, not sure where. Sound like a good idea

Then can mandate whatever they want... I use this on all my gas cans

find the module then do ohms test and see if any wire broke, check voltage in and out. it seem more involved then it is. basic relay low voltage stuff , make sure key is on when checking voltage , actually I would start at the glow plugs see if voltage there then work back, could even be the key...

I had a wire broke coming out of the glow plug heater control. Mine wouldn't light on dash at all ( could crack it over for ever)unless I turned key all the way just before the start position. It would come on and a would count o 15 then turn to start it. I thought it was module and when I...

I heard that some where about the price increase. I know a couple dealers around here have a few 22 on the lot. Might rethink the 23 model if they want to dump the 22 before the 23 show up.

Yeah hard cabs are expensive. I been looikng at these, at least can get the doors and windows off in the summer. pricey but nothing like a factory cab. https://curtisindustries.net/kioti-tractor-cabs/

you get snow today or rain? I over in NY near Saratoga, we got about 6 inches heavy wet crap

That tractor is a beast lol

I am in the market for buying new tractor. I am so tossed on cab or no cab. I would want it more for winter then summer. Been searching for one I can take off and put on for summer/winter conditions

My maintenance is, keep air filter clean, make sure chain is tight after every fill up of gas/oil. You can tell when chain needs sharpening. Blow off dust and chips after every use. Once a year new plug and filter if needed

If they let you pay on line its the best way, just make sure to keep or write down the date and confirmation number. They cant fudge you around this way

Same here, been using it for years. Put a crank pump in the #2 fuel tank works great.

I usually have to adjust my carb depending on the time of year, lean it out richen it up. I can tell when she is running strong by the sound. Like I said a new carb in the near future. I used it this past weekend to cut up some down tree limbs, 8 pulls ,. fire up and run like a charm. Guess I...

I been doing it for 10 years, add some howes treatment and never had an issue.

I am pretty sure the MS 029/ MS-290 is the same exact as the 029. I looked up carb and it list them all for same carb. Take care of them, clean filter, sharp chains , they will last forever. I also only use stihl oil in it.

029 is a hell of a good saw. Bought mine back 93, I would say since 2000 I have cut up 6-7 cord a year. Replace spark plug coupled times. Up till last year it would cold start 3 pulls, then it was 7 to 8 and local dealer said its probably seals so i replace them. Use rope in cylinder to remove...

Hello I looked at a few of them and didn't hear any dates. If I am buying a new tractor might as well get the latest model I like to do lots of research before stepping into a dealership. Thanks for the reply

Hello Guys Its been 10 years since I bought my CS2410. It been very good to me, couldn't ask more from a it at all. Now I am getting ready to upgrade , just curious anyone out there knows when the 2023 models come out ? Thanks

I usually get a load of logs in winter, between now and April. If winter isn't to bad I get out and cut logs into 17" pieces, in April / May I will split to size, leaved piled up until September. Usually get enough wood for 2 season out of a load of logs. The stuff I split this spring will get...

What the size of that shed, I been storing wood like you past 20 year, this year a shed is getting built.

Hello Sgt Slag Little late to the party here... what I do for my bucket moving snow... My bucket came with 4 holes drilled across the bucket , set in a few inches from the edge, I bought some tek decking (8ft piece) and cut in 1/2. I have 4 ft bucket. bolted it thru the bucket leaving roughly...

My understanding is the CK20 series went to the CX2510 series around 2000. I guess they kept everything but made improvements. I been researching both the CX2510 HST and the CK 2610 HST. My CS2410 is 10 yrs old and looking to buy new, step up this time.

Your welcome... I get lots of good info from this site

Hello Guys.... Sorry I abandon this thread. I have a few health issue unfortunately but things getting better. I solved this issue... the PTO leverage is attached to a linkage that goes into the hydrostat , there is a adjustment on this linkage. I made a slight adjustment on the linkage and this...

Yeah that works.... but doesn't really solve the problem

Hello.... When mowing with my MMM I get into a little thicker/heavier grass the mower bogs down and almost stops , engine drops a little rpms. Mower would probably stop if I let it. I changed oil and all filters, mower deck blades turn free. The mower would never flinch at mowing taller grass...

Hello, New to forum have a question on pricing. Getting into the market for a scut this spring, and like many others over whelmed by the information. I read some post that recommend just going to dealers and test drive which I agree and plan to do. I would like to know peoples thoughts on the...