Search results

Results 1 to 146 of 146
  1. Bedlam

    Quick question and favor from anyone owning a KIOTI CK2610.

    I was caught off guard the other day with this as an option to purchase. Anyways my question is.(I cant find any info on the specs) Measuring from the ground to the ''top'' of the folded roll bar? (I have very low clearance ).So Im wondering what this measurement is and this would be with it...
  2. Bedlam

    Cylinder Leak Down test?

    Hello, I am attempting to probably rebuild the lift and curl cylinders on my Ford 7108 Loader. After viewing a few U Tube vids I had never thought that the leak down (thats slowly gotten worse over the years) could be the control valve . So I found this video of how this woman checks for it...
  3. Bedlam

    USPS? getting delivery ever other day?

    I was wondering if anyone else has gone a day or longer getting the mail delivered to the Rural box? A few weeks ago I was watching for a certified letter to arrive. It took almost a week . and 4 of those days in was in my local PO. I understand one day was due to snow.(4 inches). but then two...
  4. Bedlam

    Steering system oil Rejuvenate?

    Always wanted to use that word LOL But I was wondering if anyone has experience or suggestions for the use of hydraulic oil 'magic in a bottle"? I have developed a slow leak in my steering system in the Main collum .It has been slow for about 10 years. But finally found the leak is in a seal...
  5. Bedlam

    Whats it called?lol seach fails

    I have learned much in my lifetime but sometime its just plain hard to learn or remember. But I've never had the use for this item. But do now and not sure jsut what I can use for search words ...
  6. Bedlam

    2 nd layer roof shingles?

    Hi, I have gotten so much off topic help on the forums here ,And after searching the web, I depend more on peoples opinions here. So The question I have is ..I have a single layer shingle (20 year) presently on the house. (small camp). There is ice and water shield under the lower 4 feet. I plan...
  7. Bedlam

    1720 tach cable?

    Im hoping someone with this model might have a source for a tach cable. I have been searching forever and dont seem to find one. Even a part number would be helpful I think. its a Ford 1720
  8. Bedlam

    CPVC versus diesel?reactions?

    I am in the process of doing some fuel storage. I have an oil pump and want to add a small extension to the pickup end. I want to use CPVC pipe and also a ball valve. I dont see any reactions over the short run. But got to wondering how it will work out. there wont be much pressure in the...
  9. Bedlam

    Front Loader Quick Attach Automatic lock?

    I was thinking of making some sort of either hydraulic or electric way to pull the levers down and up on the loader QA. Cant seem to find much ,I have hydraulics to the front of the tractor but would have to design the mechanical part and the hydraulics. I also consider two Linear Actuators (12...
  10. Bedlam

    Splicing underground wire

    I have to somehow splice three pieces of 12 2 direct burial.does anyone know the least expensive way to do this?it will be buried about 2 foot in dirt and won't be live all the time.thanks
  11. Bedlam

    Ford 1720 injector question?

    Probably a simple question but I have a system like the picture.My question is what are the small "low pressure' line for ?they run between all the injectors and the last one goes to the fuel tank. Is it some sort of vent or is it a return line for fuel?The one on my far left that goes to the...
  12. Bedlam

    wHOLE house oil filter question?

    Hi there, this might not be the right cat for this but Im wondering if anyone has this type of spin on filter on the oil furnace line? http://generaloilfiltersdirect.com/pdfs/oil-2011-prices-page10.pdf I finally found this listing but couldnt get further in the search to find a reasonable...
  13. Bedlam

    Wow Wally World backhoe

    Found this today!! https://www.walmart.com/ip/6-Dig-Self-Contained-Tractor-Backhoe-FH-BH6/963682762 Wonder how it is or who makes it? interesting how they say I can have by tommorrow..
  14. Bedlam

    Tractor tire inner lining?

    Not sure if this was covered or not. I couldnt find any in the search. I was wondering if anyone still uses a rim liner (inside) with a tube? I have a rim that has rust on it and plan to sand it down. But wondered if anyone used these for future protection. I can even find them on ebay. perhaps...
  15. Bedlam

    Comparison  Opinions needed between these two

    I wonder how many people have bought and use either of these products and might offer an overall opinion. I was planning on the Lowes one but then found the tractor supply.around here the tractor supply is about 10 dollars difference. Not much of a concern...Just wondering how dependable each...
  16. Bedlam

    Bead Blaster?

    I was wondering any ones opinion of preference for a bead blaster. I have a low budget LOL Tire Bead Seater Tool | eBay Seems to be 5 or 10 gallons. I wonder if anyone knows if the extra 10 gallons is worth it in operation? I also plan to add some fitting for use as a port air tank. Also...
  17. Bedlam

    HMM Oil filter internals..

    Here are two tubes I watched and couldnt believe what was inside of my Orange oil filters. The worst oil filters on the PLANET!!! - YouTube The worst oil filter EVER! - YouTube Here I have been using them in my tractor all these years, and just did an oil change and left this one on the...
  18. Bedlam

    YIKEs its a volk but imagine a tractor!!

    Imagine if this were a Tractor. Where were the safety chains?? Ed Callahan - LOL... This just happened, runaway trailer...
  19. Bedlam

    Anyone with a TAKEUCHI TB35S mini x?

    Any TAKEUCHI TB35S owners out here? I am searching for anyone with opinions on this type of machine. Anything would be great. Thanks
  20. Bedlam

    Suggestions of what size and model for a Kioti tractor

    Greetings. I am considering a new replacement for my Ford 1720 tractor. Its been so good to me I am not sure I can part with it.But if I can get a real good trade value then I might consider it. Anyways considering the 1720 here is what Id like to get from a kioti model. I would like to upgrade...
  21. Bedlam

    Loader QA from Everything attachments

    Id like to take a minute to thank everyone at Everything Attachments for their superior customer care in my recient purchase of a Quick Attach (loader) adapter from them.I had researched the possible cheaper units. But finally felt that I and my 20 year old tractor deserved the best. So I went...
  22. Bedlam

    Strange conversion

    check this one out...LOL
  23. Bedlam

    Vacuum dismount

    This is interesting dismount bead lock vid. YouTube - Vacuum Tire Dismount and this one way to much fuel. http://www.youtube.com/watch?v=_UFGYn7QOZY&feature=related
  24. Bedlam

    Start em young

    Watch this operator.. YouTube - 4 yr old kubota backhoe operator
  25. Bedlam

    TSC exclusions?

    Finally after off and on searching I find this . TSC Standard Coupon & Promotion Exclusions Three months in a row Now Ive had coupon emailed to me asking me to take advantage.Three months I have been looking to buy the welder that was highly recommended by TBN people. Three months of filling...
  26. Bedlam

    interesting saw safety

    This isn't about tractor safety but Is quite interesting I'm sure most of us use a table saw regularly YouTube - Time Warp - Table saw!
  27. Bedlam

    Bear Digsafe

    Kind of sad ..Grizzly bear digs up power cable (112209A)
  28. Bedlam

    NAPA?pricing

    I had the pleasure today of replacing a couple of wheel bearings. I bought one form my usual small parts company and installed one, then decided to do the other one. I thought Id try Napa and see if they had it in stock. I tried the website too as I have used the Auto Zone one for some time with...
  29. Bedlam

    Lolly Column

    My present project includes a couple or more Lolly Columns. I was wondering, if times had changed in the Home Depot and Lowe's these days I reciently purchased one from Lowes and the top and bottom plate were 'included' (or they didn't choose to scan the plates).For years Ive bought from local...
  30. Bedlam

    New top link Hydralink

    I wanted to pas this site on to the others it came up in another thread. HydrauLink - a self-contained air over hydraulic top link Great videos of it in operation. Yep I spelled it wrong in the title but camt fix it. the correct is HydrauLink
  31. Bedlam

    OSB OMG $$

    Wow. I went to Home Depot here and . ouch $12.73 a sheet for the 1/2 inch . I Read that luber is down dues to low use. And I assume that OSB is higher becasue ther eis less scrapes for them to make it? I rememebr $4.76 a sheet. LOL What a swing on this stuff. Not sure what a sheet of 1/2 inc...
  32. Bedlam

    HF survival techniques

    Has anyone noticed that several of the .99 cent things are now always close to 2 dollars? I assume this is how they are surviving the crisis. Split leather gloves used to be .99 cents they almost doubled to 1.99. And this is one of the items Ive watched now since summer. Never gone lower. Also...
  33. Bedlam

    Splitter cradle and crane

    I have a 3 PT splitter (Kelley) I am finally going to weld up and on a small cradle for the I beam .I was wondering peoples opinions on having it extend past the splitting wedge.(stationary wedge) on the end of the I beam?? Is it helpful or not? The 'crane' is just a pile of scrape at the...
  34. Bedlam

    Roll.em Bucket?

    Anyone thing this could get unstuck with the bucket roll? Looks pretty stuck.. YouTube - My stuck tractor
  35. Bedlam

    wow excavator over and down

    YouTube - Digger slides off mountain.Nasty!.rv
  36. Bedlam

    A gotta see stunt.

    I had to post this one ... YouTube - Liebherr or YouTube - Liebherr Excavator climbing tower
  37. Bedlam

    A gotta see stunt.

    I had to post this one ... YouTube - Liebherr
  38. Bedlam

    Axe Man returns

    Its new season is here I should have posted this earlier two have already aired. Ax Men - History.com
  39. Bedlam

    3 PTH lift ball replace

    Im curious if anyone has had the pleasure to replace their lift balls like this REPLACEMENT BALL CAT 1 - Agri Supply And how they did it.??
  40. Bedlam

    Mobil garage video LOL

    YouTube - Moving a Garage with a tractor
  41. Bedlam

    Cheap Welders and DC recomendation?

    Specifically I'm interested in going with the ac/dc model. http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10051&catalogId=10053&productId=100053881 Only the AC model is available from my home depot and also Lowe's. This model is available online from my...
  42. Bedlam

    Ford 1729 3 PT hitch troubles

    sorry problem was solved with a search here. YAY TBN
  43. Bedlam

    Another seat belt viol

    http://www.metacafe.com/watch/yt-uM2z8DMDCAE/takeuchi_mini_excavator_accident_live_digger_crash_bagger_unfall_escavadora/
  44. Bedlam

    another interesting video

    YouTube - Spydercan http://www.youtube.com/watch?v=FxLdavUlZXs&NR=1 http://www.youtube.com/watch?v=lXlVXcIff1U
  45. Bedlam

    Shrinkage?

    A recent observation that seems to be growing all the time.Like we don't or wont see it.Have you noticed the things that have shrunk in size over the last few years? My list.First is my cookies,from Wal Mart, like most cookies the cookie itself has shrunk,yet the package is still the same just...
  46. Bedlam

    CC card warning

    I post this hoping that others wont fall onto this 'trap' On my recent Credit card statements i found a charge for $19.99 .twice. I write down all my transaction each month as they are mad and then check them off up receiving my bill. On the statements it reads mvq-privacy and then a phony...
  47. Bedlam

    Odd auto key problem

    I just wanted to pass on what to me is an odd situation , that maybe someone could avoid some problems with recently my daughter had car problems. particularly when starting. It would crank but not fire and run. Always think big problems. Well in this case she said that it would only happen...
  48. Bedlam

    Chimney Cleaning?

    Seeing as we all talk about lots of subjects I was wondering if people could share thoughts ideas and experiences about chimney cleaning. Especially this time of year when we should get the first cleaning done NOW. Mine I made and easy way to get to and clean from the top down with a brush on a...
  49. Bedlam

    Sharpen saw blades?

    Just curious, I see HF has a sharpener machine for circular blades. - Harbor Freight Tools - Quality Tools at the Lowest Prices But I was wondering if anyone had attempted to sharpen theirs with the angle grinder, and what results they got. I am looking to sharpen , as I use it strictly for...
  50. Bedlam

    Another Tube Question

    Just wondering if anyone has experience with this tube 12.4/11-28 REAR TRACTOR H.D. TUBES- - Agri Supply I'm interested in knowing if it has the 'Double stem' As I call it for filling with liquids. I assume where it says rear tractor and the size that it would but there isn't a picture yet...
  51. Bedlam

    Tube Link?

    Just wondering if anyone has a link to a good site for a rear tube . 24 inch?I searched the TSC site, seemed like they would carry them but all they have are the smaller ones. thanks.
  52. Bedlam

    KD firewood??

    Up around my area, there is a place that Kiln dries firewood. Does anyone know how they do this seems like it would be costly to run a kiln for this purpose?
  53. Bedlam

    Metal roofing under

    Hi , I would like to get some peoples opinions either from first hand knowledge or instructions on the idea of a metal roof over an asphalt roof. Here is the situation, a garage roof in the northern states (so sees snow) .Presently it has an asphalt roof thats about 8 years old. No leaks but Id...
  54. Bedlam

    Interesting double tractor

    YouTube - Seeing double ? Two 8 N Ford Tractors
  55. Bedlam

    Injector Timer

    I was reading a recient post. Runaway Engine - TractorByNet.com Didnt want to hijack it, Was wondering if someone could post how to do the timing when reinstalling. (The basicas as I figure it changes from one to another) Thanks
  56. Bedlam

    HA? I dont understand

    I have seen threads closed before and it has been obvious why but htis one '' Re: adjusting brush hog -------------------------------------------------------------------------------- This thread has been pruned and is being closed. '''' Anyoen able to tell me what I missed?All the threads...
  57. Bedlam

    Another interesting video..

    YouTube - Tractor-Truck-Car CRASH
  58. Bedlam

    DR Grader

    Just wondered if anyone has experience with this device DR Power Equipment - DR® Power Grader - DR Powergrader, A Driveway Grader pulled behind your lawn mower, utility tractor or as a ATV, UTV attachment. My uncle was asking my opinion.THANKS
  59. Bedlam

    1720 brakes?

    I was wondering if anyone has a diagram of some sort or discription that would show how the 1720 ford brakes are set up? Thanks..I assume 4 wheel drive is the same as 2 wheel drive?:)
  60. Bedlam

    HF SLIP

    Just thought maybe some would be interested in HF 'New" item - Harbor Freight Tools - Quality Tools at the Lowest Prices
  61. Bedlam

    Newest GM vehicle

    Interesting.. GM and Segway unveil new two-wheeled urban vehicle
  62. Bedlam

    Well Head a good Ground?

    I know this question has the chance to bring allot of feedback, and controversy but Ill try to make it as clear as I can I know there are allot of knowledgeable people on here who can answer it for me . Thanks First ,this is in concern to a water pump placed in a well pit,Presently there is a...
  63. Bedlam

    page returns wrong after pic view

    I was wondering if someone could help me . when I scroll down a page and click a picture and the return It goes to the top of the page. Is this normal? I seem to remember it just returning to where i was Thanks in advance .
  64. Bedlam

    page doent return after picture views

    I was wondering if someone could help me . when I scroll down a page and click a picture and the return It goes to the top of the page. Is this normal? I seem to remember it just returning to where i was Thanks in advance .
  65. Bedlam

    Flooring Ideas?

    I was hoping for some input to pros and cons of two different flooring ways. Basicasly I have 2x6 joists set at 16 inch on center,proper support etc.this floor will use just under 6 sheets so relatively small are and is going to get glue down tiles. (not stick down) whats in question is First...
  66. Bedlam

    HF goods that are good (NON TOOLS)

    I was inspired by the two threads of good and bad Harbor Freight products .I have found that there are many that are well worthy and aren't 'tools' one is; Harbor Freight Tools - Quality Tools at the Lowest Prices I don't think this can be beat. I bought a couple tubes of these with every...
  67. Bedlam

    Banks are doing fine now here

    I got quite a surprise today when I went to update a couple accounts, I checked around for interest rates and all six banks had approx the same interest. (within .05 %) except mine was almost 1% less than the others, I inquired if they could match the competitors or if I would have to take my...
  68. Bedlam

    Ever been billed before you got stuff?

    In recent thread on here got me to thinking of a peeve I have with companies these days. I purchased a large item from a company across the country, to be shipped via truck, at a cost of 2300 dollars. I waited to order it the day after my charge card 'closed' so as to not have to pay out before...
  69. Bedlam

    LURKERS

    Have heard a few posts lately form people who say they have been lurking don't be shy the more that post the merrier. We can always use other opinions and ideas. I find I never tire of this place. I'm addicted definitely. Welcome and POST ON:):)
  70. Bedlam

    Tractor Buying Pricing??

    Recently i was in the mood to purchase some equipment, and had to deal with salesman.I decided to use what some might thing a different approach. I sat down and searched the net for what I wanted for options, then I wrote out a letter explaining that I was in the market for a new machine.I gave...
  71. Bedlam

    Craftsman tools warranty and workmanship today

    I was curious if in my later years if I am getting stronger and break the ratchets more frequent? In 1975 my dad passed down to me a 3/8 ratchet form sears with eh lifetime warranty.I would use pipes on its and even two people would pull on it.And no troubles. But the last 7 years or so i have...
  72. Bedlam

    Better to work backwards? JD110 TLB

    With all the talk of tractor splitting and trouble. I was wondering One day I drove by a deere dealer and saw this John Deere commercial products: Features for 110 TLB I had no idea that the hoe could be removed and apparently it has a 3 point hitch 'Backhoe detaches quickly allowing use of...
  73. Bedlam

    Coice of Material for Sandblasters

    I was just curious what people use as the abrasion agent in their sandblasters? And also what types and the results that they get. I have the small ones available from the auto shops like http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=30979 and works well ,Ive only used sand...
  74. Bedlam

    Pat's Easy Change  Pats hitch additional legnth

    Think this was covered before But I couldn't find it. does anyone remember the offset legnth when installing the quick hitches? thanks
  75. Bedlam

    Tight hyd fttings and guts

    YouTube - Car passing under the JCB 4CX backhoe loader
  76. Bedlam

    Question on garage door motor

    Probable no real place to place this question so, its here. I had a lightning strike possible that took out my garage door opener board. The door can open and thats it. it doesn't want to reverse. Its the board as the stop switches are working. My question is reference to the motor, I was...
  77. Bedlam

    Light duty log splitter

    I am considering purchasing a small electric log splitter I already have a engine driven one but like the idea of easy portability and the use inside the basement. Year ago i had an electric one from sears it was along screw that would move the splitter 'ram' from one end to the other it wasn't...
  78. Bedlam

    10-10-10 question

    I was just wondering, I got a a bag of 10-10-10 fertilizer. the person said it was good for evergreens. would it be good or bad for a lawn?
  79. Bedlam

    weld spoon? what is it

    Harbor Freight Tools
  80. Bedlam

    Winter already??

    Has anyone seen this plow, ? Wonder how it would go on a tractor even without a loader seems it might be good.But looks like a lot of stress on the receiver. YouTube - SnowSport HD Utility Plow
  81. Bedlam

    Mowing  HF finish mower???

    Has anyone tried this one from HF? Worth the money maybe? Harbor Freight Tools - Quality Tools at the Lowest Prices
  82. Bedlam

    Mr Slowpoke

    YouTube - russian tractor
  83. Bedlam

    Front wheel car to plow car

    This might sound 'out there' but I have a car, that runs way too good to junk, and wont pass inspections , so I am considering adding chains to the drive wheels and mounting my grader converted plow blade to the front. Using a electric winch to raise and lower it. I have seen a car around here...
  84. Bedlam

    Crazy video building demolish

    YouTube - Death of the "High Rise" crazy video But what happens after he gets a broke arm is really stupid .watch as the hydraulic hoses explode. a couple of fun ones YouTube - Crazy Bobcat Driver Loads In To Trailer!!!! YouTube - Amazing unloading excavator
  85. Bedlam

    scarey but funny trucks

    Sorry if this isnt the right spot. but tractor trailer trailers are pulled by tractors.at first this video didn't seem to more than one mistaken truck but as it went OMG. YouTube - Crazy Truckers on European Highway
  86. Bedlam

    Verizon goes under in NH

    WOW As the state agency said the switch to Fair Point will save money and have much more faster modern "service" Been paying the bill on line for years with Verizon. now get this new fangled bill from Fair Point. ''An Important Notice Regarding On line Account Management To maintain your...
  87. Bedlam

    Ifyou Liked Axe man

    Here is an interesting video, some detail and good angles. YouTube - Hauling logs, Peterbilt 378 550 3406E CAT
  88. Bedlam

    Nice to have money to play

    YouTube - Backhoe Loader (Excavator) Dance- markoló táncoltatás
  89. Bedlam

    test

    I am posting two pictures of the front 'hub' on a ford 1720 4 wd. Both sides started leaking oil from the 'seals'. Thanks to a previous poster, I was easily able to disassemble it. I now see how it works. My question is in the first pic with the shaft showing the largest outside 'rod' are there...
  90. Bedlam

    Lowes low

    Not sure if this is the right category, but I have seen some bad things about Home Depot posted, and I wanted to pass along my Lowes story. I know, its just the way 'we' do business these days but I sure hope the big shots open their eyes. I went to Lowes to pick up a range, that they...
  91. Bedlam

    NEW TSC STORE OPENING NH

    I see there is a new TSC store set to open soon on the Franklin and Tilton town line in New Hampshire.Right next to the Dollars store across from Hannaford store. The sign doesnt say when But If I get by there and it changes ill make a post. Link to the main site. Tractor Supply Company - Home al
  92. Bedlam

    reapair manual Good? ford 1720

    Just curious if anyone has used this type of manual? Ford New Holland 1120, 1220, 1320, 1520, 1720, 1920, 2120 Tractor Repair Manual - FO-46 or dealt with this company. I am looking for a detailed shop manual but dont want to get one that will be too basic. Im looking for exploded views etc...
  93. Bedlam

    Ford 1720 spindle seal leaking

    I have a Ford 1720 four wheel tractor, that has a leaking front spindle seal. I know years ago I had done one side, and I can remember that it was as bad as I thought to replace.On the other hand I remember possibly thinking I dis-assembled more than I need to.LOL If anyone has done this and...
  94. Bedlam

    Tire Tubes

    I am searching for a tire tube size 7.50 X 16. What a chore this has become. Even the tire store, look at you crosseyed. LOL I used to be able to buy 15 tubes at wal mart for $7.80 use them in the lawn mowere tires , twice around . Any, does anyone have a lonk to any reasonable or cheap...
  95. Bedlam

    intieresting solar

    YouTube - solar converted tractor
  96. Bedlam

    burning stump

    I dont want to 'beat a dead horse' about stump removal. But I have a few that I have 'salted' a year ago, and remember someone saying something about a washer machine ove rthe stump when you burn it. I assume that the washer either needs some air holes in the base, or whatever to get a draft...
  97. Bedlam

    the light side.

    YouTube - Farmer
  98. Bedlam

    oak trees and woodpeckers???

    I was wondeirng if anyone knows why I find many dead oak trees this year.I have three alone that are about 20 incehs across, and upon dropping them, I find thet in the upper limbs, there are holes into the tree deeper than the bark. They are so well spaced, i thnk maybe a pecker has made them...
  99. Bedlam

    Grapple  Grapple Legnth question?

    I am considering the enclosed grapple purchase. It looks plenty sturdy for my setup.There are two legnths, one 28 inch and the other 32 inch. Both same priced. I measure mine as they state, an come up i th a bit over the 28 inches but not close to the 32 inches. Id prefere to have the 32 inch...
  100. Bedlam

    Yikes

    Safety Humor - Forklift Work Platform.
  101. Bedlam

    Hydraulic Top LInks

    Here is a link to some top links I saw in the recient AG supply catalog. Im not sure if they are a new item or not, but I have never seen them before. Hope this helps Product Listing -
  102. Bedlam

    A Happy Tractor owner again

    YouTube - Stolen Tractors on the light side. YouTube - pimp my tractor
  103. Bedlam

    HF 12 volt compressor. OPINION

    I was wondering if anyone has bought and used or may have an opinion on this HF compressor. Harbor Freight Tools - Quality Tools at the Lowest Prices Its on sale for $59.99 dollars, but can be bought online for $49.99 My idea for use is to just fill tires with the tractor. I have tried airs...
  104. Bedlam

    Rustoleum going???

    Ive placed this thread under projects, because to me the last step in any project is a good coat of Rustoleum. Well today I went first to my local Wal -Mart to get a gallon of OIL based Gloss Black paint.This reticular store was out of the Black, and had only some white. So I asked the clerk if...
  105. Bedlam

    Safety POLICE training video

    YouTube - Pod Swing YouTube - 3 year old operates mini excavator probably not unsafe but interesting ones YouTube - Amazing unloading excavator
  106. Bedlam

    fun clip worlds most inexpensive tractor

    YouTube - rc tractor YouTube - Tractor stuck in the mud 1 YouTube - Tractor stuck in the mud 2
  107. Bedlam

    Another sad accident.

    YouTube - accidente de tractor
  108. Bedlam

    Mobil Home????boi diesel???

    check this mobil house out. on the light side. dream house - Yahoo! Video
  109. Bedlam

    Leaf Vac hose size?

    I am looking for ideas and maybe experience to solve a decision for me. I am using a standard 5 hp chipper shredder to make a leaf vacuum. The shredder is mounted on a box trailer, and the outlet into the box. I have made a "plug" for the wood chipper end.(to increase suction loss). I plan to...
  110. Bedlam

    Leaf Vac Hose

    I see many have built a leaf vac system. I am searching for some 6 inch or possibly 7 inch hose. I found this site on e-bay. eBay: 6 INCH LEAF VAC GRASS VAC TRAC VACUUM HOSE GRASS CLEAR (item 140063815627 end time Dec-18-06 06:23:20 PST) prices about 11 to 13.50 a foot plus shipping. I was...
  111. Bedlam

    interesting links.

    Yahoo! Image Detail for www.iol.ie/~manister/tractortrouble/vladvtz-30ssh.jpg
  112. Bedlam

    X-Mas 2006

    :) :) :cool: After reading several 'heated' threads I thought it would be good to have one for us to get in the spirit, and post X-Mas pictures etc. I like X-mas lights.There must be many around the world who can post some pictures. Allan
  113. Bedlam

    New Explorer

    I downloaded the new explorer. its free. And I wasnt sure if id like it or not but its great once you get used to it. One thing thats good is the tabs, it allows you to have more things open in one box. one "trouble' I had, was everytime I opened explorer, it would open a seperate tab with the...
  114. Bedlam

    Air tank on tractor.

    Just thought I'd put a couple of pictures on to show how I solved a problem . I often move trailer around the yard, (mostly off road ones). And the tire loose air after months or years. Well I have a portable air tank that I fill, and then use to fill the tires . I searched And did find a...
  115. Bedlam

    5 hp chipper to vac conversion

    I remember seeing a post where someone took a shredder/chipper and converted it to be a vacuum. But I cant find it . If you know where it is Id appreciate a link. Others wise does anyone have an idea, if it would work or work well to convert one. the one I have is a sears and is a chipper...
  116. Bedlam

    I got the shaft but wrong size...

    I bought this motor Harbor Freight Tools - Quality Tools at the Lowest Prices It has a 9/ 16 inch shaft. Around here all the pulleys I have found have a 1/2 inch or 3/4 inch shaft size spec. I had to put a 1/2 shaft size pulley on it, so I set it on the vice, and ran it,I used a very rough rasp...
  117. Bedlam

    small thumb opinion

    I was wondering if anyone has purchased, or has any thoughts on this thumb on ebay. It has a good track record, and has been on for awile. Thanks I am considering the smallest one they offer.I have a bead of weld down the flat surface of the stick, that I assume ill have to grind a slight bevel...
  118. Bedlam

    fast tractor, not stock LOL

    Here is a fun video... YouTube - The JCB GT-The World's Fastest Backhoe! Also found this one of one of those trailer backhoes in operation. I know someone posted and wanted some info on it. YouTube - backhoe
  119. Bedlam

    PINS

    I am searching for a site online that has some 1 inch pins for the backhoe. Cant seem to find any by my searches, If it rig=ngs a bell with anyone please let me know thanks Allan
  120. Bedlam

    Box Scraper  Kodiak Box Blade

    I am considering a Kodiak Box Blade from ASC farm supply. Anyone have one or any recommendations about it? I'm interested in the 6 foot one, Id like it to be fairly Heavy Duty. As the weight would be good for counterweight. Any info would be appreciated. Thanks Allan
  121. Bedlam

    Tire Tubes

    Does anyone have a link to a reasonable site that sells Tire Tubes? Online to ship? I am mostly looking for a 16 inch tube, but would be nice if the site also sold the rear tubes as well. Thanks Al
  122. Bedlam

    New "Bug."

    Here is a new John Deere tractor, definitely different looking . YouTube - john deere walking tractor YouTube - john deere walking tractor III
  123. Bedlam

    cool but not all that safe.

    Hers a link to a video clip its interesting. Probably less safe for the machine that the operator. YouTube - Wheeling with Bobcat
  124. Bedlam

    Rake Tine for Land Pride

    I have a 6 foot Land Pride rake. The tines are 28 inches long, and 1 inch wide. I have found inexpensive replacements at the AG store on here, but they are the ones with the hole for the retainer. Mine are solid with no hole through them, the front end of the tine is "bend: over to keep it from...
  125. Bedlam

    Paint Steel Roofing?

    I have a friend who wanted me to ask what kind of paint to use on metal roofing.She says they are painted now and some slight rust. I assume they need to be sanded and primed. Thanks. Allan
  126. Bedlam

    LOAD HANDLER???

    I am interested in anyones feel for the Load Handler for the pickup bed. Specifically how it handles with firewood. The prices don't seem bad. I can see how sand and Stone would come out OK, But seems wood could get hung up. Thanks Allan
  127. Bedlam

    WOODS BACKHOES

    Anyone bought or used a woods backhoe model BH70-X BH80-X lately? or have a general price on them? I assume they are sold using the tractor hydraulics. I have an older woods 750. 3 point hitch unit. with a PTO pump. Oh Here is a link to their site...
  128. Bedlam

    rip cutting into a stump

    Would I be right to think that after I cut a tree down, that if I use the chainsaw to cut down into the stump that I should sharpen the chain to a straight across angle?(no angle to it as you do if you are using it to rip lumber from the logs.) As the downward cutting action would be ripping as...
  129. Bedlam

    safety chains drag

    Just wondering if anyone has the problem with the chains dragging on the ground. I have a small utility trailer that sits low. I have twisted the chains to shorten them.I don't like this idea. I recently used some wire to hold them up. My idea now , and I'm not sure if anyone has done anything...
  130. Bedlam

    Nascar Backhoe

    Interesting video. http://www.adi-limited.com/2-01-010-040-040.html
  131. Bedlam

    dual gauge wheels??

    I know many have made their own gauge wheels for a blade or rake. I would like to ask what the angle of the wheels is to slant them back. Also any thoughts on how two wheels on each side would react. They would be 10 in tires with the axle support in the middle For a total of 4 wheels. two on...
  132. Bedlam

    Good Yahoo Group

    I found this Yahoo Group and wanted to pass it along. http://groups.yahoo.com/group/homebuiltequipmentfortractors/?yguid=133087686 I haven't used it yet, but it has many members and looks good so far. Al
  133. Bedlam

    Rake  Opinions wanted for rake

    I am possible going to purchase one of these rakes. http://www.agrisupplyco.com/cgi-bin/cgiitmls?m=ThisP&p=26779.000000&l=1 or http://www.northerntool.com/webapp/wcs/stores/servlet/NTELargeImageView?storeId=6970&langId=-1&rfno=200315827 withe the shipping added in they are both prices close. I...
  134. Bedlam

    Tin man spotted on tractor(light side)

    Check this guy out
  135. Bedlam

    pto slip clutch

    Does anyone have any good sites that sell a PTO SLIP CLUTCH.? I have a brush hog and cordwoodsaw, that Id like to have 'protected' . I see the 'overrunning" ones but I seem to remember seeing ones that go on the shaft and would slip if you hit something. I have found this one. In the slip clutch...
  136. Bedlam

    Link to

    I found this link that Id like to pass on to others . Its of great concern to many. Thanks.Al http://www.poultryconnection.com/phpBB2/viewtopic.php?t=22674&sid=40faaf1b5a596b7be301f5ee09390698
  137. Bedlam

    Water and oil mix..no no

    I found this site and found it informative. if anyone wants to take a look. http://www.practical-sailor.com/newspics/charts/898fuelfilters.pdf#search='add%20on%20diesel%20fuel%20filters'
  138. Bedlam

    Repair manuals

    I was wondeirng if anyone has any ideas or ,links to the best repair manual fro a ford 1720 tractor. I find some on Amazon, but unsure if they are very detailed. the ,link to the one Im considering is. http://www.amazon.com/gp/product/0872884201/ref=sr_11_1/002-0148660-0609629?%5Fencoding=UTF8 I...
  139. Bedlam

    Nitrogen in auto or truck tires

    OK< Know Im getting old, but try to keep up on things, Does anyone know what this new idea is about and what the advantages are? They fill the tires with nitrogen instead of air. I noticed that the tire house had to have a sign and a revolving green light rotating in the entrance , when they are...
  140. Bedlam

    Septic Tank Maint.

    I know this subject may be a bit off subject, But I'd like to get some peoples opinions from experience on how often they do, or should pump their tank.I have a 1000 gallon tank.Its 26 years old. A friend of mine pumps and installs them for a living and tells me that if it is working correctly...
  141. Bedlam

    Upper HYD. Link

    I am posting a few pics of my Hyd. upper link I just got done building.Hope it give people some ideas. I got my original from the forums, and glad for it, as I had never heard of such a thing before. I bought a piston from 3" x 10" x 2" piston from surplus, for 49.99 dollars, and two three...
  142. Bedlam

    upper link from cc machinery

    Thanks for the advice for the upper hydraulic link. I also see that the piston from http://www.ccmachinery.com/TNT.htm has a check valve. I am waiting for info on how to order and what the shipping would be. Thanks for the advice. Does anyone have experience with this company?? Thanks ALLAN
  143. Bedlam

    upper link hydrolic *DELETED*

    I know there has been posts about the upperlink converted to hydrolic. I rember one where the piston was welded onto the cut off ends of the original link. I would want to get a clevis end piston and do some welding on the ends to make it fit. I searched the other night but couldnt find the...
  144. Bedlam

    Tractor Fires

    I was reading a post on fire extinguishers, and am wondering if anyone has any fire stories to tell.An extinguisher is definetly something to have on hand. Al
  145. Bedlam

    kUBOTA l39

    i AM CONSIDERING A kUBOTA l39. iT HAS A BACKHOE AND ROOF ETC STANDARD. aLSO A HYDRO TRANSMISSION.|Anyone know a rough price for them? Thanks ALLAN
  146. Bedlam

    woods 9000 hoe on ford 1720???????

    I have a ten year old ford tractor model 1720. It is 27.7 hp. With a 7.4 gpm hydraulic. I am looking to upgrade from my woods 750 hoe to a 9000 model from woods. The dealer says that its too big. However the literature says it will fit .And now the dealer says it is possible but it would be rear...
Top