Search results

So I have a Lincoln 140 c has infinite amp and wire speed adjustment about 10 yrs old. Never worked correctly like my old Lincoln 100 or 125 amp with infinite settings. Tried big and small rolls of various brands mig/ and flux core wire, currently have .035 flux core in it. Changed out feed...

Buying something like this is very expensive if existent so Looking for ideas on smaller scale two bin fertilizer hopper to load into a three point spreader and a small garden tractor pull behind. Found it much cheaper pd per pd to buy by the ton vs 50 or so lb bags, but requires a...

2016 6.6 Duramax is I'll attempt to make this quick January drove truck 500 + miles to visit my dad, idler pulley and tensioner went out far from home got truck towed to a GM garage only place up there I could find that would touch a modern Diesel. Stubbornly figured since it's in might as well...

Last few years noticed some oil filter cover plates have rectangular openings vs circular, for both engines and hydrostatic drives. The filters are the same size. I believe the relief spring, bypass valve, threads, similar media etc are the same. To put my mind at ease, if original filters used...

Own a older JD 260 mower with a Kawasaki engine, the old 260 runs great, until you park it for a few weeks or months fuel pump loses prime to fix it I pull the line from tank to the pump and suck on it till gas flows. My backwoods hack fixes the problem for another few weeks. In that time frame...

Recently acquired 2 sheets of transparent poly carbonate plastic thinking about making windshields for pull behind snow trailers so when I pull the kids don't get pelted with snow. These trailers will not be used on public snowmobile trails just around my property. So before I dive into this...

So saw this novelty contraption at a local farm and fleet no idea if it can serve anyone any use minus the fact you can now say you own a tractor If you don't have one. No three point and looks like it's on a four wheeler frame with similar components. I'll stick to old used beat up garden...

Recently changed all fluids and filters on this l4150 wondering what this intake snorkel is for and if I should bother to fill it with oil? Or aquire a paper element for it? Never had one, did clean it out though it gets pretty fouled up when I'm using it to chip, till, or hog with it. has the...

Recent b-day present got a troy bilt 25cc straight shaft to replace two very cheap junk curved shaft weed eaters at my cabin after much internal debate and a good experience with an older TB back pack blower, went cheap and decided on a troybilt two stroke as it would only be used it 6-12...

Hi Kubota experts, I own the first two types listed both have been pretty bullet proof after over 35 yrs of probably hard lives both bought used and abused rather inexpensive, I personally really enjoy operating the hydraulic shuttle as I can change direction without clutching you cannot change...

Curious if anyone has used these somewhat Inexpensive filter bundles. Definitely has an Ease of ordering online, comes with all the filters you want for a pm. Id be using them on older 30+ yr old Kubotas usually pm both tractors once a year sometimes skip a year so every two years max. I've used...

Curious, not sure if there was a thread like this before a completely different thread got me starting to drift, anyways 3 came to mind and why, In order of favorites. I'll try and be to the point. #1 2016 GMC 3/4 ton, 6.6, 4wd. It's a diesel lol and was the first brand new vehicle I...

Hi wondering if anyone tried anything like this for bringing spare sharpened chains in the woods when cutting? Or devised a good way of bringing spare sharpened chains with them?

Bought this old all homemade gravity actuated farm use dumping trailer at an auction a few yrs back for $50 finally getting around to using it and making it somewhat safe for my family to use when they help me, it will be pulled by either a Kubota l2850 or l4150. In my inventory is unused...

annoyed with leaving indentations of a vice in my saws bars when servicing, bench testing saws, sharpening chains and annoyed with trying to balance saw/ old scraps of wood and tighten the vise I threw together a "jig"that drops in to vice. Used scraps of wood 1x, a scrap of 1/4" plywood and 5...

Lost since 1952 on a Alaskan. Glacier. 50+ service member's lost and forgotten until recently. Reminded of it this morning on Sunday morning. Operation Colony Glacier: Bringing servicemembers home

Did a search on TBN found nothing. TMG Industrial Wondering if anyone has experience with TMG industrial attachments or anything in general from there company? They have a pretty big line of stuff always see there stuff in local auctions usually new. Thoughts or experience, and impressions are...

So with the holidays fast approaching I'm posting stuff I built for my stepson for previous Christmases 5+ yrs ago it's farm related. Hopefully it will give folks some ideas, with adequate time to build stuff, as I wish I could have found some better ideas when I built this stuff. Everything...

Hi have a mossimo brand Chinese made 60" atv,sxs snowblower. Threw it on in a hurry last year to clear my hilly property in the UP. Overall it works pretty good throws snow 30' it's kind of slow going and a little underpowered in snow over a foot deep. biggest complaint is the mounting plate...

Sold. Hi I have two equipment trailers Id like to sell one of them. First one is a 17k, 18ft deck over w 5.5 dovetail 23ft with fold flat ramps made by Michigan trailer sales, bought new in 2021. Or the second is a 16ft deck 2' dovetail 16k trailer recently completely rebuilt with 4 new...

Wondering if anyone's ever built, or bought an adapter to hook a QA SS implement to hook on back of a tractors three point. Like a three point SS built land plane? Most use of a land plane on a SS is back dragging any way, in my experience. Only thing I've ever found was a QA attachment to...

Planning on welding 1 d-ring and two hooks on my minis 18" bucket, are my pictures good locations, is my setup an overkill? Might not mount d-ring just one or two hooks unsure yet. Will be using 7018 rod, prepped surface accordingly.

Took my near vintage Ski Doo out checked it over saw a few signs of mice cleaned it up unknowingly the mice got in the insulation between the exhaust pipe and heat shield where I theorize it made a nice flammable nest I just filled up the tank so it's got 10+ gallons of gas. My lesson and...

Why? Just curious what folks think of these. https://www.agriculture.com/machinery/atv-utv/the-john-deere-gator-to-replace-your-car

All attachments sold.

Thought this was a neat idea if I had a 1/2 ton I might be interested. How to Make Your Half-Ton Truck Work Like a Super Duty CLDD | Home of the first Weight Distribution Trailer for your pickup truck.

https://unofficialnetworks.com/2021/10/22/ski-doo-made-side-by-side-snowmobiles/amp/

Thought this was a great Idea for those that haul bigger things. Taillight scales...

Hi getting ready to sell my 3 point backhoe, took it off four years ago, and forgot where this linkage goes or how it's attached or if it's needed pretty sure it was involved with the top link, was on a l2850? Bushhog manual says nothing about it.

Hi I like to overanalyze larger purchases and appreciate opinions. In the market for a 3 ton mini for my small xmas tree operation and property maintenance, I will be selling my wood max chipper has 30 hrs on it and 3point great bend 651 bh I completed most large clearing projects so may sell my...

Hi I have a wood max chipper it's been giving me some minor problems with the infeed roller. Basically bark and small branches wrap around the infeed shaft pushing the bearings out of place. I clean them daily which is a pia. but today the debris was so tightly wound it pushed the bearing off...

Hi again feel like I'm beating a dead horse, anyways wondering if anyone built or attempted to build a smaller brush cutter or flail mower for a smaller mini excavator? Did it work? if so how did it perform on a smaller excavator? If not why didn't it work? The excavator would have to be under...

Hi I'm wondering if anyone has or is using a flail or brush mower on a mini excavator under 6k lbs with less than 10 gpm hydro flow rate? It wouldn't be used for extensive deforestation or brush removal. Mostly weed control and maintenance around ponds, planted xmas trees, and ditch banks...

Hi kind of considering looking at a NorTrac XN16 Mini Excavator — 15.2 HP, For occasional use to compliment my L2850 with loader for various tasks on my small xmas tree farming operation. From previous experiences i know the yanmar engines are pretty durable, eaton makes decent hydraulics...

Hi Im looking for ideas and suggestions for a new drill press to replace my current porter cable floor model (its only three years old but is currently struggling and the belt tensioner broke again). It will mostly be used for drilling steel I use it extensively daily when I'm doing a project...

Hi, I almost got sucked into this, could only find limited info on the web about this company so I'm assuming it is one of the most elaborate scams I've ever seen. I was interested in the 2008 l4240 with loader and cab for under 12k with 1700 hrs delivered. They apparently have there own...

Hi, I was replacing the front seals on my l2850 and I replaced the small lower bevel gear also. Unfortunately when I put everything back together and tighten the bolts the hub assembly doesent spin it binds up.. Looking at the parts manual I have there's two different part numbers both 12 tooth...

Hi I am new, I guess im trying to reinvent the wheel. I recently came across a rolling snowmobile chassis with most drive components removed. My plan is to re power it with a four stroke gasoline engine connected to a hydraulic pump which is connected to a hydraulic motor connected to the...

I am new and in the process of developing a hydraulically driven utility snowmobile from a spare rolling chassis in my garage. I do have pretty decent mechanical and fabrication skills but limited knowledge in hydraulics. I will probably have numerous questions and from my browsing it appears...