Search results

Results 1 to 41 of 41
  1. M

    Thinking of getting Honda Pioneer 1000

    Like the looks of those, haven't drove one yet or check about any known issues with them. If I get one I plan to have it street legal. Anyone here have and can share any info?
  2. M

    May go look at 2610

    Looked at one couple of years ago seem to be okay, wife wants HST my kubota was geared. Won't stick around if the price is above MSRP but looking is free. Haven't seen many issues with these mention on here
  3. M

    RTV-XG850 sold

    Had it for two years and only 17 hour and 165 miles on it. Wife wanted it so I buy then she ends up with both knees replaced We had mini horses about mile from our home we were to ride it to feed they gone now too, I wasn't that wild about it, didn't care for the throttle off idle ( had the...
  4. M

    2008 B2320

    Excellent shape, new front tires , quick hitch,Piranha tooth bar $6500 think 400 hr price out of line or about right?
  5. M

    Another one of those Kubota vs John Deere videos

    Seen one few years ago by a member on here don't recall who, anyway the guy seem to be fair
  6. M

    Important Information about your Kubota Product (RTV-XG850)

    Anyone else get this letter from Kubota? The purpose of this communication is to inform you of an important update for your Kubota model RTV-XG850SL-AS with the serial number 15361. Please contact your local Kubota Dealer and reference bulletin(s) PSB-2021-102 for further guidance and to...
  7. M

    Kubota B2320 leak RH axle front wheel

    Notice this small leak from RH front axle (wheel hub) leak is where white paper is This easy or not so easy fix. Again very small leak but may as well fix it now
  8. M

    Quick Hitch Removal

    Will removing the QH mess up the PTO shaft alignment?
  9. M

    Battery Tenders..hmm

    Just for kicks I thought I would test some tenders..I have two Deltrans one JR one 1.25 amp, Two Black&Deckers and one old Sears maintainer. I fans in 12v outlets turned lights on..ect..alll had some drain. After couple of hours not one of the tenders came on, the old Sears maintainer did and...
  10. M

    Bought King Kutter Rear Blade

    Not sure I will use it that much but for one that only been used twice for $100 I couldn't turn it down ..It is a 6 foot
  11. M

    Simple trailer mover

    Little on heavy side but works great
  12. M

    2" Ball trailer coupler latch

    Are most of these latches the same? (for 2" ball) my latch is toast
  13. M

    New Kubota RTV-XG850

    Just got it this morning, wife liked it over the Honda and Kawi. If was all left up to me I would have went with the Kawi. We had a Kawi 610 few years back and it was okay (slow) but done just about everything we ask of it. I hope this unit has the same quality as in their tractors.
  14. M

    Ferguson tractor, old commercial

    Dunno if it been posted before but thought it was kinda neat. Safety police shouldn't watch :D
  15. M

    Sweet Gum Tree Roots

    Had two 50' trees cut down and their stump ground. After about four years some of the roots have rotten underground making it a tripping hazard. Also there is some fungus that grows from one of the roots that is as hard as a rock, making it tough on mowing. What would be the best method to deal...
  16. M

    30x30x10 Shop

    Just finished up with the lighting I used 14 48" LED 5000k from Hyperikon. Very bright white light
  17. M

    My ballast for smaller B2320

    29" long 8.5" wide at the widest part...6" thick the top piece is 29" long 3" wide and 4" thick...Thinking little over 500 pound?
  18. M

    Hitch Pin for ballast box (top link )

    Needing a pin that the tractor top link hooks to on a ballast box. Need 4.5" but unable to find anything at the dealer that is long enough. Trying to find one of these if possible, I suppose they are strong enough for small amount of weight (500 lb)?
  19. M

    Shop Door apron

    Just completed my 30x30x10 shop, need to add a apron in from of the door. I went online at Lowe's and talked to one of their chat people. I ask about how many of 80 pound bags would I need to do a 4" thick, 10' long and 30" wide took him about 10 minutes to get back..He said I would need 167 80#...
  20. M

    XJ2025H/BH/QA Laoder

    No really way to compare prices close to me on LS tractors but found a couple of LS that the dealer just starting to carry. I head good things about them overall and thought I would take a look. Salesman was a younger guy and didn't really know much more than me about the LS but the first price...
  21. M

    Picked up a LandScape Rake

    Found a used one about what I been looking for 48", 24 tines for 3pt. Not used much if any just been out in the weather for six months. Got it for $100.00. I thought was a decent deal.
  22. M

    Still trying to figure this out

    Both my rear cutter and tiller seems to set to one side. I tried to adj the turn buckles that did stop the sway left to right but done nothing to center the QH and implements. Nothing looks to be bent or any damage that I can see.
  23. M

    Anyone have the Titan Ballast Box?

    Looks like they reworked the lower pins but now they look to low to hook up with QH. I called them again but still not sure, the info I got was lower hooks should work but may not, the top pin should work with QH but it may not.
  24. M

    Lynch Pins

    Mine aren't popping off/out, I keep breaking the ring that snaps in place to hold them..Now these are the cheap made ones, not even sure if they're Chinese quality.
  25. M

    Script error on forum page

    A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger, or let the script continue. Script: http://cdn.viglink.com/api/vglnk.js:19 just noticed it today
  26. M

    RTA 1050 tiller adding weight for ballast

    I thought about buying ballast box but seems to be hit or miss with quality or working with QH. I have the Land Pride rta1050 tiller I want to use for rear ballast. It weights 385lb so a little on the light side. I want to add another 75 pounds to it somewhere but not sure where to add it to.
  27. M

    Why so much titan attachments hate?

    Depending on the forum you go to there seems to be a some difference in opinions with them. I started to buy from them but decided to wait and read up some more first. I guess it depends on what you buy from them too..I don't know?? I bought from Ken's Bolts on Hooks and BXpanded with great...
  28. M

    Bought a Carry All

    thinking about making some type of hauler for a ballast..Anyone on here tried that with one?
  29. M

    Any reason you couldn't use this instead of a QH adapter

    adapter Would be easy just to flip into the hook of QH..yes..no
  30. M

    Did someone on here make this ballast box?

    I just ran across the pics that I save on my computer..Can't remember where I got them..ballast look pretty good.
  31. M

    Walmart SuperTech 80-90 gear oil

    Any issues using this in front axles of b2320?
  32. M

    b2320dt front axle capacities

    The manual says 3.2qt..is that for each side or total? never mind..got it.
  33. M

    Quick Hitch Top Link doesn't go in

    Chain is very tight Can't get it to drop all the way in for some reason. Any advice? thanks
  34. M

    Big Bee 4' Bush Hog leaking

    I noticed after filling to overflow a leak started where the PTO shaft connect to gear box on cutter. Did I overfill it? the cutter was lower in the front and the over fill plug is on back of gear box. Anyways if it's a hard fix or cost too much I thought about just filling with grease. If I go...
  35. M

    B2320DT 400 service

    I'm about to do this myself..What I don't understand is the oil in transmission for all the Hydraulics? FEL..ect? The manual isn't really clear
  36. M

    Bucket Hooks negatives

    Been thinking about adding to my small B2320. Wanted to know if anyone ran into any problems with them..
  37. M

    Fuel Treatment Needed?

    My B2320 won't see much use at all during the winter months. Do I need to add anything to the fuel?
  38. M

    Bought B2320

    Been looking for couple of year now, finally found what I think is a good deal. 2008 B2320 (350hr) FEL, Tiller, and Bush Hog (4') all in great shape. Got it for $8500. Can't wait to learn to use the FEL. The owners were great folks..They just didn't have no need any longer for it.
  39. M

    DX-29

    Anyone know off hand the cost to have F.E.L added to the DX-29?
  40. M

    Hinomoto E2004 ..worth the money>

    Hinomoto E2004, 4x4, bucket loader, 48" bush hog, 3 pt hitch, 512hr $6000.00 Pretty good drive for me to see it, didn't know if it would worth the drive or not?
  41. M

    Badboy Pup

    Hello to all. I been looking around local for a ZTR for a while and been reading up here on this site and others. I looked at Hustler, JD, Exmart, and Badboy. I ran across a 2008 badboy pup 23hp 54" cut for $3000.00 with 287 hours. The mower looks in pretty good shape and well taken care of. I...
Top