Search results

You can pay a John Deere dealer to take a tractor home, but John Deere refuses to acknowledge that tractor belongs to you. this is so bizarre I really don't know where to post it. how about a poll to see just what farmers think of this? John Deere just told the copyright office that only...

like the title says, not too big of a deal though, less than 2 hours including re & re the loader to be able to get in there. hood comes off easy. gc241 broken hood mounts - YouTube

Well, I guess something had to break sooner or later. :laughing: have been doing a lot of digging/traveling over the last week. today the bucket curl system gave up the ghost. bucket will still curl relatively decent, but will not hold. requires constant pressure on the joystick while...

I posted a picture of this about 5 years ago and noticed it had over a thousand views but no comments. I called it a tool tote but things have worked out differently. I really only use it for mixing cement, but it has proven very handy for that. I can have a dump truck deliver the navijack at...

built this over the last few years. https://www.youtube.com/watch?v=FKB0CbzodEM

Been working on this for a while. Built for Lincoln welder, using Miller welder. https://www.youtube.com/watch?v=FKB0CbzodEM

Does anyone know if I can get a hotter than stock glow plug to fit on this engine? sick and tired of hard start even in summer. btw, also looking for an aftermarket block heater that will work. bad cord fried mine, buying from dealer will cost $235.00

another Massey Ferguson goes where no everlast welder has ever been seen. ?Tractor girl? drives Massey Ferguson to the South Pole - North - CBC News :laughing: :cool2::cool2::cool2:

still fun though. ?Tractor girl? drives Massey Ferguson to the South Pole - North - CBC News :dance1:

?Tractor girl? drives Massey Ferguson to the South Pole - North - CBC News :thumbsup::cool2:

has any other brand even tried? ?Tractor girl? drives Massey Ferguson to the South Pole - North - CBC News :thumbsup::cool2:

does anyone have an idea where to go, besides MF, for parts for the iseki diesel in the 2410? tractor laid over on its side and the engine ran away. no damage to body parts etc, but engine appears to be toast. too bad, it was a pretty well flawless engine. next one will have positive air...

https://www.youtube.com/watch?v=9DP5l9yYt-g notice the reference to MSDS sheets.

I sure wish I had a working scanner so as to provide a nice clean copy of this letter. The last thread I was involved in here was locked by the administrator, in part because I referred to Everlast welders as throw away items, I never imagined I would be receiving a letter from the RCMP...

does anyone know where to buy an aftermarket bucket curl cylinder for a gc2410. long story short, it's bent.

I realize the salesman pressure on this board is out of this world, and there is no doubt this post will be tagteamed by shills, and I'm probably not going to change anything about how business is done here, but there are some things that I need to say. Firstly, most farmers are not welders...

Had some fun with my tractor yesterday, thought I would post a link to the video. Massey Ferguson GC2410 working with forks GC1700 - YouTube

I have finally given up on having the tach/hr meter working in the winter. The tractor is always stored inside heated garage, I take it outside and within 10 minutes the tach buries itself and starts howling. Stop machine, restart, rev up, tach buries and howls, repeat procedure until pissed off...

high, my machine has developed a very annoying rattle that is clearly coming from the lights mounted to the roll bar. I have tightened all the screws and bolts but the problem persists... I seem to remember reading about this issue a while back, does anybody have the fix? machine is at about...

I got ag tires put on my 2410 by the dealer when I bought it. they charged me $200.00 dollars to have the tires filled and assured me they would use non-caustic fluid. by the end of the first season they were signs of rust appearing around the valve stems. beginning the 3rd season, (may) there...

i was surfing youtube last year and saw a good idea for a backhoe dolly out of wood. backhoe dolly - YouTube so I decided to build one out of scrap steel, and used 6" casters instead of 5". it works okay, next one i will build an offset into the front of the frame to enable it to wheel in and...

hi, my machine is ready for the 250 hr hydro oil change. I plan on putting the backhoe on and positioning the bucket/backhoe cylinders such that the oil in the cylinders is evacuated as much as possible to prevent old oil from being kept in the system. does anyone know for sure if the suction...

any idea what an old workbull will pick up with the loader? 2000 lbs?

like the title says, i built a 12'x16' foot tractor shed that i want to use as a spray booth from time to time. i plan to put a fan low on one end wall, and plumb two grates in between the trusses at the other (doors) end. the two grates will then be ducted to grates mounted in the eaves, then...

my steering ram needs replaced as it is very sloppy. there is also oil leaking in that area. i have been checking the engine oil level and that doesn't seem to be the source of the leak. does the steering cylinder get it's oil supply from the main hydraulic pump?

finally got sick and tired of running across situations somewhere on the property where i needed a tool that was stored somewhere else on the property. bought a cement mixer before i bought the tractor and hadn't got around to using it yet, so i figured incorporate it into the build as well. it...

i'm thinking of building a dumping deck this year, but would like it to dump either over the back, or over the side. i have seen trucks from the '50's that had side dump decks, but not any detailed photos. does anyone have any plans or photos for one of these?

does anyone know how many of these machines are being produced on an annual basis?

here is a scaleable, easy to build, plan for bucket forks. The only bucket mods are one small piece welded on the back side. i built a set, that work good on a gc2410, out of 1 1/2 x .125 hss and 3/8 x 3 flat bar.

my 2410 sat for the better part of 6 weeks, after which i noticed a blowdown on the edge of my property. so i decided to just put the brush forks on and move it rather than cut it up with the chainsaw. i started the tractor, let it warm up for about 20 minutes (-5c) and then did the job. i...

somewhere back in june i decided to build a set of jin poles for the myriad of lifting chores that seem to crop on my property. i had an old truck (superdodge) named in honour of super dave osborne. it already had a steel deck that i figured would be heavy enough for the task, and i had lots of...

Hi, i'm looking for a replacement engine for an mf10 riding mower. i realize tecumseh has gone out of business and i'm hoping there might be a mf dealer out there who may have one sitting in a back corner somewhere.:)

hi, i'm wondering if anybody has had to adjust their cruise control assembly. mine always backs off immediately, a little bit, and then continues to back off so that i have to reset it so regularly that its really not a cruise control. has anyone else had this problem, dealt with it?

hi everybody, i can't really afford a thumb for my gc2410, but i can afford to build one. and we all love pictures:D btw, this is the first day progress.

you decide... that tree was dead standing until that little backhoe showed up. ;)

hi, does anyone know when/if mf is going to change to a shift on the fly hi-low hydrostat range selector?

hi, does anybody know how much a new hood for a gc2410 costs?

hi, does anybody know if these are cast iron or aluminum blocks, cylinder heads etc...? tks, Bob

firstly, hi everybody, my name is Bob and this is my first post. i have a 1967 mf2135 and am planning on purchasing a gc2410, but i have a few questions... the brochure doesn't list tire sizes or wheelbase length, also i wonder how many of the major components are cast iron versus aluminum. as...