Search results

Hey all, Been running our tractor quite a bit between last year mowing and the winter Snowblowing. We are in full mowing season here and this spring we were up to 140+ hours after the winter work, we are just over 190+ hours with the mowing and work here. Now I have not had a regen on this...

OK guys, Got about 70 hours on the T4, I've been bad about getting in the cab to start and let her warm up. So it was a bit chilly a couple weeks and I got up to fully check her out on startup. We'll all the lights come on with the power up but the glow plugs never cycled. On our T2220 and...

We'll we were installing camera's for our backup monitor and we had the headliner down running cables and we decided to upgrade our speakers. I have a android phone and I wanted a bluetooth adapter for me to stream my Amazon music, this adapter even had the ability to take phone calls with a...

Hey Guys, Have any of you found a source for switches that fit our tractor? I've been looking and it looks like the only way to get one is buy another windshield wiper switch and black out the picture. Thanks

Have not been on in quite a while, We'll due to health issues I am having a lot of trouble getting into our DX60, we looked at having a custom set of steps made and maybe a air seat but the cab is too cramped for me to get in and out of. We were riding by a dealer last month and saw a T4.75...

Hey Guys, I've got the T2220 which is a 35 hp tractor, but I never see a shop manual for that on E-Bay. Is there another New Holland model number that I can look for that will be the same tractor or close enough or just man up the $200+++ for one. Thanks guys.

Hey I just got my tractor back from the dealer but it's missing something I think. There is a rubber shaped plug in the lower right corner of the window that fills that bump in the cab, what do you have on the inside, I have a rubber but on the inside I see some circles in the rubber but I...

Hey, I just got my tractor back, but something is missing, what do you guys have on the inside back window in the lower right corner where that bump rubber plug is. I see a bare rubber plug but I thought it had a cover on it. Thanks guys.

Hey guys, I'm going to post this in the New Holland and the Case section, my DX60 is in the shop getting a new cab top right now. I noticed a split in the black plastic on the right rear near the light but it started at the cab and went within a inch of the light. It's being replaced...

Hey guys, I'm going to post this in the New Holland and the Case section, my DX60 is in the shop getting a new cab top right now. I noticed a split in the black plastic on the right rear near the light but it started at the cab and went within a inch of the light. It's being replaced...

We'll trying to finish up a few projects. Waiting for the welder to show up and weld the bulkhead plate for me (my welding is terrible and this will be right out up front). For our T2220 and the Super steer we found out we needed 75" hoses on the rear and 8' hoses on the front. Needed to cut...

Been watching the discussions on the Flails and have been looking for one for about 6 months. We even drove over to Duluth MN last week to look at one but it was in real bad shape. So I was checking our local dealership "Titan" and they showed up with one in Fargo. Called about it and it was...

T2220 Cruise Control "Now Fixed Ok I've read the posts and have the tractor torn apart. Ours has never worked right, had the tractor in with a list of things to fix and forgot to put the cruise on the list. So I had the tractor in our shop last week and adjusted the brake switch, hit the...

Hey Guys, Been busy up here moving snow, I wanted to try a different approach and use the loader to move snow into the slough that runs through my place. I started with the standard bucket that came on the DX60 and after several days of working a few hours I saw that I needed more...

Hey Guys, We've been cleaning the roof of our house this week using a pallet with 3/4 wood on it for a deck, this sure beats getting on a ladder and trying to use a roof rake or walking on the roofs to try and clean them. We want to build a two person Work Stand this year, something...

Hey Guys, We'll Christmas came early this year for me. I am making a new post for this so others can find it easier. You guys will have to thank my wife for some of these photos, she braved the cold to take them while I did the unloading. I took these photos so you guys could better...

Hey Guys, Was looking on e-bay for a Grapple before Thanksgiving and this looked like what we wanted to use. Not that far to ship, shipping was a bit high, they wanted to ship to a elevator near by and I made them ship to my farm. Told them I have the equipment (forks) to off load right...

Hey Guys, We started this project this spring and had a large water problem hit our house in May. We'll we just got back to work on it last month. We finished painting all the parts yesterday, the lids and chain guards are in the shop curing. I built the 3pt hookup to work with our quick...

Hey guys, Has anyone purchased anything from the Equipment Barn. I'm trying to find a King Kutter Pallet Mover PM15 and no one has one. I've never heard of them but they list that they might have one in stock. I put a order in with my local Ag dealer in April to get it with their...

Planter toolbar question Hey guys, I'm building a 3 row planter using 71 flex units, the toolbar will be about 7' long and be a 6"x3" box. I've been thinking of a clean way to add the hookup for the 3 pt on the tractor. You guy posted the A frame from Agri supply and I had my lower pins...

Hey Guys, Sorry I did not do this job, every time I even mention the word welding the wife starts to laugh. I can do a small fix but my welds look fair sometimes. I know I've got to practice more. So I took both my buckets to my local one man shop, hes a great guy and he does it all...

Hey Guys, I was searching for Lustran Planter Plates the other night and came across a post from here that someone has a PDF reference file for the Lustran plates. You posted that you got it off the web at I think Lincoln Ag products when they use to have it on their site. I would...

Hey Guys, I'll get photos up in the next day or so, got four JD 71 planter units today. The guy raised his price $25 each after giving me a price on the phone and asking me to make a offer, I told him I had to see them first. People left calls all weekend wanting them so he raised hit...

Hey Guys, I went on and traided in our IH1066 and a couple accessories on this new Farmall 60. I can't complain with the deal, I got all my money back on my old tractor, snowblower, ditchbank mower, also all my repairs to the tractor. So I got to use this tractor for 15 years and just...

Hey Guys, I know I cross posted this but I'm looking for any info, trying to pull this off by tomorrow maybe. Thanks.

Hey Guys, Taking a down day and catch our breath while we get dumped on with snow. We have major flooding in our area, we have only one east west road not under water yet and no north south roads that don't have a section closed. The water here is higher than I've seen in 30+ years...

Hey Guys, I have a neighbor who has an Alfalfa field that has a lot of gophers, they also have them in the yard and they are moving over to our place some. He found this unit and was wondering if any of you have used this type unit or know anyone who has. Just looking for feedback if they...

Hey Guys, The way the loader hoses are routed on our tractor they rub the paint on the hood no matter how well you zip them. I've thought of having for 1' extensions made and zip them outside the brace instead of inside the brace. I also have used a clear plastic adhesive sheet to...

Hey Guys, Did your tractor come with the Clevis on it or not. I'm looking at the IPB and they want $100 for the Clevis only. I think it should have come on the tractor.

Hey Guys, If these were closer I would be all over them, they are on Craig s list for Saturday under South Dakota Farm+Garden, he has what looks like a 8' with two 3 or 4' sections behind it. He also has a couple other things for sale. Here is the add, look under the land roller. south...

Hey Guys, Finally got all the wiring and lights in, and had a couple days to do the work. I bought all my wiring and switches from a marine boating place on e-bay, good prices and good service. This place has the wiring loom like the tractor comes with and I wanted to put all the harness...

Hey Guys, I mentioned this in my other post but I want to get this question where it is seen. I have two line quick connects at the back of my NH, the connector is larger than the other pigtails I picked up. Anyone know where I can get the larger ones on the net. I'm looking but not...

OK guys, Don't know where to put this but we got a new Berlon Fork attachment for our Tractor. I mainly got it for the quick attach spade to dig out some stumps and bury some large rocks. We'll I was looking around the shop and all the junk that takes up floor space, I've got room in...

I know that there is a thread on this and in it a couple guys said they were ordering the expensive lights. So has anyone got them and how is the light off of the units. Our tractor has a 40 amp alternator and the stock lighting is Halogen so with all the lights that are on the tractor I'm at...

Hey Guys, I tried to check up on some parts and their prices tonight and found that the prices have been removed from New Holland's web site. Is it just me, can you guys see the prices on their pages. Thanks.

With the Hydro Drive does anyone have a problem getting the tractor in Gear?? I have to hit the clutch a couple of times and giggle the foot pedal and it still is rough getting the tractor in gear from neutral. Is there any adjustment?? My process is to put in the clutch and try to put the...

I've got to ask about your avatar, it looks like that tractor is buried pretty good:). Did not want to dump on another thread. Is there a full size photo of that event. It hit -35.7 this morning here, we are up to -7 right now, not much to do but surf the web.

Hey Guys, With all the talk of where Tractors are built. Is there a way to check where the T2220 are built, I think my dealer said our DX25E was built in Japan. Thanks for the info.

Any suggestions for a joystick that is straight instead of the bent metal one that comes on the T2220. Thanks Mark

Morning all, We've been playing with 9N's and a JD60 and a IH1066 for years. Traided in the 9N for a DX25E last year but was not happy trying to do tractor work. The JD60 was going to need some work and we decided to traide it and the DX25 for a new rig. We got a good traide in and...