Search results

I am not sure how many of you served in the military, but I went in the Army back in 1967 and stayed in until 1976. I remember coming back to the states in 1970 and just before departing we were told we did not have to wear our Class A uniform due to all of the problems with hecklers coming...

We have had the same bear coming by our house for the past three years. It has gotten bigger and also smarter. Loves our bird feeders and has figured out how we have them installed. You can see that he was smart enough to shake the cable instead of trying to jump up and grab the feeders. It...

I finally got the snowblower attached to my tractor. I purchased this last year, but it showed up one day before I had my shoulder operation so there was no time to get it installed and hooked up. We had so little amount of snow last year that I just went ahead and used the snow plow instead...

Now this is a nice looking bird

I have a Kubota B-7500 and I have the quick hitch sub- frame for me angle snow plow and snowblower. I purchased a hydraulic motor that I want to use to rotate the blower chute. When I tried using the Husco controller I found it would not rotate the motor in both directions when connected to...

I have a Char-Lynn motor # 129 0003 002 I believe it is a J series motor and I can't figure out what mounting bracket to buy? Mounting is defined as 5 Bolts on 1.775" dia. B.C., 1.241" dia. pilot. By now you can figure out that I know little to nothing about hydraulic motors so please take it...

For sale is the Kubota L2072 72" Hydraulic controlled front mount snow blade. Sorry I posted this on the wrong place will repost later. Wayne

New to hydraulics! I want to modify the chute on my Kubota front mount snowblower. I checked into buying the kit from Kubota, but the price is extremely high. I have a Char-Lynn motor part number 128-0032-002 and cannot seem to fin any information on this motor. (again I am sort-of new at...

it all starts here: The dog does his job And the shooter does his job: You end up with this!:

Finally got to use my new front plow on the B-7500. Worked fine although there is some learning how to needed. Practice will improve my plowing abilities New Plow: After one day of use:

I have for sale is the Kubota L2072 72 Hydraulic front mount snow blade. Plow includes the female quick hitch attachment and dual hydraulic cylinders for angling the blade. The cylinders have the hoses and quick connect fittings. Cutting edge is reversible and in excellent condition. There...

Looking for a Kubota quick hitch grader blade. This will have to include the quick hitch and directional cylinder. Made to fit onto the Kubota male hitch modle B2762 Thanks, Wayne Dunbarton, NH

I have a single row potato digger and a few days ago I went out to see just how well it would work. Last for about four to five feet and the track was not aligned properly and all of a sudden it moved / shifted to one side jammed up the track and broke the drive chain. The bearing actually...

I just never thought I would be the type to actually get out there and wax the lawn mower. Today was a bit slow around here so I decided to wash the mower and then once done I took out the wax and did that as well. Seems like everytime I wax something I'm real close to trading it in. Not...

A desperate woman writes to the Technical support Guy, Dear Tech Support, Last year I upgraded from Boyfriend 5.0 to Husband 1.0 and I noticed a distinct slowdown in the overall system performance, particularly in the flower and jewelry applications, which operated flawlessly under Boyfriend...

I am not sure if this is a gloat or just a decent purchase? I was looking for a John Deere mower deck for my old LT-155 and saw this ad for a "John Deere ride on mower almost new B.O., make an offer". So I sent off a quick email asking what model it was and how much they really wanted for...

Have a chance to buy a 2007 42" Cub cadet Zero Turn mower. The price is right at $1,200. It has been used on a residential small lot. Person seems to being a pretty good person and has done maintenance on the mower. These are the only pictures I have of it and might buy it this week. It has...

They say if you want birds you have to hunt with an ugly dog, well this is Maltby a German Wiredhair Pointer. An he is really a bird dog for sure. He has been watching these two ducks that are on the pond behind our house for the past week or so. He has been swiming in the pond right along...

Summer's almost here ...we can now see the deer moving around. Yep, won't be long.

Read this article today and just thought some of you might be interested in reading it as well. 240-Year-Old Elm Tree Coming Down YARMOUTH, Maine (Jan. 8) - The massive elm tree that shaded the corner of East Main Street and Yankee Drive was sick. Like so many others in so many of America's...

WISHING ALL A VERY MERRY CHRISTMAS 'Twas the night before Christmas & out on the ranch The pond was froze over & so was the branch. The snow was piled up belly-deep to a mule. The kids were all home on vacation from school, And happier young folks you never did see- Just all sprawled...

Not that I own one, but thought this might be a good saw jus to have around considering the price? Homelite Factory-Reconditioned 42cc 18" Gas Chain Saw

We closed the camp down this past week, but prior to leaving we climbed a few mountains in the area Arab and Azure mountain. Located in the northern part of the Adirondack mountains. the day we took the dock out it snowed. Not much, just an inch and a half, but snow none the less...

My son just got a German wiredhair pointer and we took him out on his first boat ride and actually his first fetch! Malt-B German Wiredhair Pointer - a set on Flickr I think he is a keeper! Oh and sorry about the link, first time I have loaded pictures into Flicker and not too sure how to...

Well, guess you could say I am a sucker for a 1982 John Deere riding mower. Saw a 108 for sale on Ebay (local pickup only) so I bid on it and ended up getting it for $266.00. Oh and when I got there he also had the two bag bagger with the deal. Guy told me it "aint no good without a bagga"...

Picked up a new potato digger Friday. I am sure it will make digging potatoes more fun this fall. 3 pt hitch with pto vibratory. Also got a new potato planter at the same time. This is a 3 pt hitch planter and is grown driven. I have not attached the row plow or the hiller yet, will wait...

Not sure if this is the right place to post this thread, but anyway I just had a nice experience working with Messick's parts department. Order some parts for my Kobuta tractor and delivery was quick, prices were fair, and follow-up by their personnel was excellent. Just good people to deal...

last year I went to the local Agway and picked up a few sweet potato plants, about 25 and they already had roots and I just planted them. Seemed to work okay, but the cost of the plants was really up there. So this year I ordered them on line and first of the week they came in, just slips...

If you are hauling, cutting splitting fire wood, this just might be the real deal!! Going to put one on my Christmas list, fat chance http://videos.firewoodprocessor.net/hfp160-1-broadband.wmv http://videos.firewoodprocessor.net/hfp160-2-broadband.wmv...

Not mine but the local Kubota dealer has it up on Ebay Maschio L125 Rototiller - eBay (item 230341864258 end time May-18-09 07:55:38 PDT) If you need the contact number for the person heading up their Ebay sales send me a PM Wayne

Driving back from Washington DC we were within two miles from home when she walked right down onto the road about 8 feet in front of us!

last month I noticed a small antifreeze leak. Having had the same problem last summer I suspected that either the gasket or water pump itself had failed. I went ahead and pulled the pump and checked the gasket, seemed to be fine and I could not see anything wrong physically with the pump so I...

Finally got my wood cut and split, now all I have to do is bring it in and pile it! Never ending task. The snow pile behind is actually covering more split wood. Once the snow is down I can start moving and piling the wood.

The county inspector had JUST signed off on it. Said it was "all he could do since it was a remodel".

Got these pictures from a friend in Florida, just wondering are these pigs really that large? If so what to heck do you bring them down with! Or is this just another photshop make over!

Talked to a guy at my local Kubota dealership in Milford and he told me he had a curtis cab for sale. If anyone in the area is interested let me know and I will give you his name and telephone number. I do not have any interest in this item, but thought someone might. Wayne (New Curtis Cab...

Yesterday was a wonderful day here in New Hampshire so we decided to do a short mountain climb up Mt Major. Mount Major is near West Alton and provides some nice views of Lake Winnipesaukee Summit elevation is around 1780 feet and the climb is around 1100 feet. We took the Blue trail up and...

We were at camp last week and closed down on Monday. Sunday afternoon was just a great day so my son decided to take one last dip. Water was above 40 degrees This is his second dive into the water Picture of the leaves on the far side.

I recently purchased an L-2072 front blade and wonder if anyone has a link to the manual for the sub-frame? Thanks

Looking for a single row 3pt hitch potato digger in the New England area. Wayne

It is time for me to admit that I am not smarter than a Black Bear! Recently I went ahead and put all of my bird feeders on a cable and using a boat winch I am able to lift the feeders off from the ground. This provided me with two good results (so I thought). One the squires could not get...

Looks like a really nice shape tiller for someone in New England to buy. Not mine. Howard rototiller 46 inch width overall

Looking to replace my Silverado and have talked to the dealer about the 08 LT model and waiting on him to get back to me with the initial pricing numbers. Right now they are offering zero financing and the truck I looked at was MSRP price was just under $33,000 after a short talk we were down...

Thought a few of you would get a kick out of this! YouTube - Jerry needs no help playing with his ball.

This is the old way to cut up a bit of fire wood: YouTube - Cut two logs And if you look at it from this view it really looks like you jus tmight lose a finger, nad maybe a hand or two! YouTube - Cordwood saw in action So move up to the big guy and to heck with it all: YouTube - Hakki...

Brought home my new used rototiller, but it will be months before it will be digging up earth around here. It is a 2000 Howard HR4 rotovator. In really good shape just etching to get out there and dig something up! But with this on the ground one must wait!

Recently I have found a Howard 5 foot rototiller that is for sale. I am planning on visiting the person next week to take a closer look and talk money with him. He informed me that he is selling this for an older friend of his and that the rototiller has only been used a few times and is in...

Just thought you might like to watch this JD at workYouTube - John Deere 1270D with 754

A friend sent me this picture, no story with it so I am not sure just where he got it from? Just think it is a nice picture to share.

I saw these pictures today and thougth I would pass them along. Winter sure is a wonderland.

Not srue about this, but it was sent to me in an email recently. This was sent by a man in Rhinelander, Wisconsin A very eventful day around here... A once in many lifetimes experience! I saw this lil' feller run out in front of a car-- thought it was a lost baby goat. Stopped to get it, and...

Just wondering what people around the country are paying for heating oil. I had a delivery on Thursday and the price was 3.259 a gallon (they give us ten cents off a gallon if paid in five days). So our cost is $3.159 a gallon. I decided to shutdown a portion of our house this year (2500...

Deleted..........guy sold it to someone else.

Something we see everyday lately. I think there is somewhere between 40 to 50 in this flock.

Went by the new Tractor Supply Company store in Merrimack, NH yesterday. It will have a grand opening on August 15. It is located at 515 Daniel Webster Highway south. It is in the old shopping center on the left hand side of the road for those that know the area. Spoke to one of the people...

I am looking for the end bearing part number for a Kubota flail mower model 3648. The mower was manufactured by Vemco Corporation. This is a free item and all I have to do is locate the bearing and I think it will be up and running. The end shaft looks like it is 1", but really haven't...

Got an email on Friday telling me that someone (s) had broken into our summer home/camp. So I got up early this morning and drove up to inspect the damage. They had broken a window out of the camp to gain access. Just a pain knowing that someone would do such a thing. Now they didn't take...

Started snowing yesterday afternoon and we ended up with about 10" of heavy wet snow! I took the snow blower off the other day so I used the FEL to move some of it around. One nice thing is everything looks really clean now and this will add to the length of the mud season!

We take our ice fishing seriously. Please note there is a "tip up" in the attached picture.

As luck would have it on Monday I decided to take off the snowblower as the temperature was in the 60's and we are in our Mud Season so working on the road mud is much easier without the snowblower attached. Well we are looking at a March storm with anywhere from 12 to 24 inches of the white...

Good Morning, I am going to go look at a Woods 3pt hitch snowblower in the morning. It is a model SS-60. I am not too sure what I should be actually looking at and any advice is certainly appreciated. I was told the blower is four years old, but I am not sure if the person has any paperwork...