Search results

25 New Holland TC35 - general for sale - by owner

Our old unit bit the dust a couple days ago. Been having a lot of problem with the unit this summer so I tired of messing with it and will just get a new unit. Our old unit is a R-22, I can get another R-22 unit for now but with the newer R-410A refrigerant should I just go with the newer...

What is this part called that is leaking on the transfer case ? It's the black round plastic part. Thanks Randy

A couple questions please The duck house is on the shore and not floating in the pond. Does it need to be floating in the pond ? Are there any tricks to get the ducks to start using a duck house ? We already tried putting food in the house. No luck. I'm helping a friend out. Thanks Randy

My current mailbox is plastic and I'm tired of my mail being water soaked after a rain storm. Not sure where the water is getting in so I'm just going to replace it. Do any of you have suggestions as to a good water tight mailbox maybe a locking version? Thanks Randy

I have these worms/larvae that showed up about 3 months ago in our pantry. They got into ever box that was open and then some. I've search but not real sure what they are. At first I thought they were wax worms but what comes out from the cocoons doesn't look like a wax month. The size of the...

Seems Mahindra & Mahindra Group along with Nissan & Renault are building a factory in the US to build cars. Link to the story is below. Nissan joins Renault to build car plant - Yahoo! News

I need a chain harrow that will be towed behind a 2x4 ATV. I've seen pictures of the ones they make for ATV's and they look cheap. Who makes a better quality harrow? I've seen the ones they have at Northern Tool for tractors. They look well made and strong. Do you think a 4 foot wide harrow...

I've checked most of the tractor find sites but not finding any 2005's with low hours. It's a 2005 NH TC35A with a 16LA loader none QA with 68 hours. One set of wheel weight, no remotes. The tractor still looks like it just rolled off the showroom floor. I did add the DA footwell toolbox...

A couple months ago I recieved a call from CNH Capital stating I was late on a payment. I made 2 payments that month and they applied the 2nd as principal even though a payment coupon was sent with the payment. They called today stating I was late again by almost 30 days. 31th day they report...

Was thinking of getting an ATV to pull around our garden cart, drag for leveling dirt and a lawn roller before seeding. Stopped in to a JD dealer and saw the Gator CX & CS series UTV. The wife and I both liked the layout and the price most of all. I know they are an entry level UTV but do...

Do you have to wait for the cold start light to go out if the tractor is at or close to operating temperature? I'm on and off the tractor alot and I always shut it down for safety reasons and I hate having to wait on the light to go out when the tractor is already at operating temperature. Thanks

After 7 years of use it was time to strip and repaint the rotary cutter. This has been a very very good and one tough rotary cutter. It has ingested and crushed more rocks then the local rock crusher. LOL It's a Tuffy rotary cutter made by Bush Hog. After taking a sledge to it to remove...

I can get the bucket to curl up with no problem but if I try to curl the bucket all the way back (bucket face down) it just stop with the cutting edge pointing straight down. I have to rev the engine to get the bucket to go back the last 10 inches or so and then it's very slow. I like to park...

Geting ready to till areas of my lawn and then seed. I first need to make a drag to level the dirt before seeding. I've read about using a piece of chian link fence and a couple pieces of pipe. Would appreciate any photo's anyone would care to post to give me ideas. Thanks

You think you 2 could be more involved in the internet and computers LOL :D A BIG thumbs UP to you 2!!! Hey Ibrahim, I could take you in Taekwondo. Here Taekwondo means hitting the person with a brick and running for his/her life. Would be my dumb luck you would catch the brick and throw...

And by cheap I mean dollar wise not quality. :) I needed a tiller to start the seed beds for my lawn. Didn't need a high dollar heavy duty tiller and the deal I recieved on the Howse tiller was just to much to pass up. It's a Howse RTC 62" I was able to get it at wholesale price $950+Tax...

There is a thread at a chevy truck forum I visit and this was posted by one of the members asking what it is. No one has came up with an answer yet to what it is. I have a feeling it might be farm releated and a member here might know what it is. Pictures at the link posted below. Thanks...

I'm 3 weeks out now from a hernia surgery and all I can say I wouldn't wish this on my worst enemy. The recovery pains are far worse then the injury itself. The pains will go away in time but WHEN... I won't go into details but all I can say is I have never felt pain like this in my life...

This can't be for real. A 2006 TC55DA buy it Now price of $4900. Scroll to the bottom of the page to see the buy it now price. http://cgi.ebay.com/2006-NEW-HOLLAND-TC55DA-4WD-TRACTOR-w-NH-18LA-LOADER_W0QQitemZ300019619387QQihZ020QQcategoryZ41530QQrdZ1QQcmdZViewItem

GEEZ here I am 48, a grown man and all I can say is that attemping this for the first time, I was about ready to mess in my Depends. :eek: (no, I don't really wear Depends) LOL The removal of the FEL was pretty easy and didn't take anytime at all. Oh brother, the tractor sure looked...

What are some of the tractor magazines you all read and which ones would you recommend to subscribe to? Thanks!

I have a pressure washer but not the type you can run cleaning solution at high pressure. You soak the item you are washing with low pressure, let it sit and then wash it off with the high pressure. I tried the automotive cleaning solution but it doesn't work very well on grease. I tried...

I noticed yesterday that every 90° corner (sharp corners) on the loader had thin paint and rust was starting to show. Any of your folks FEL's doing this? I spent about 3 hours today sanding and touching up all the corners on the FEL. Once first coat dried somewhat I put a second coat on...

The main page works but that's about as far as it goes. Would someone else try and see if you get the same results. Thanks

Picked up a couple cheap grab hooks from the local parts store the other day. Have a friend cutting 2 3"x6" 1/4" thick back plates for the hooks. For now there is no back bracing at all so I won't be using them for now till I get the plates drilled and bolted on. Anyone know where to buy weld...

He didn't call me a boob directly. Some worker at a NH Dealership other then the one I bought from. My dealer rounded up a rear remote from another dealer in my area and set it up for me to go there and pick it up. The young man at the counter brought up the parts and I was about ready to pay...

I need to build a retaining wall about 12 foot long and 3 feet in height. I would like to used wood but not sure what type of wood I need to us. Don't want somethhing that will rot in just a few years. I will coat the dirt side of the wall with a tar type of coating to prevent wood rot from...

Whatever was done this morning sure was one BIG improvement. The if forum is just nothing but screaming fast now. :D :D :D Good job guy's!!!

Went out to get in my truck this morning and first thing I noticed was twigs all over the inside of my truck. Got in the truck after cleaning the twigs out and looked up and noticed a bird was building a nest in my overhead console. LOL

They installed my shed yesterday for the tractor and other toy's. LOL I plan on closing it in myself. They wanted almost double to close the front end with a 9 foot door so I will just do it myself before winter gets here. Wish I could afford some of the barns you guy's have. I've seem some...

I picked up 210lbs of wheel weight yesterday for my TC35. Not sure 210 is going to be a enough, if not I'll just get one more set. I'm wanting to paint them. From the factory there are bad paint runs eveywhere and casting flashings. I'm going to smooth the fronts up on the weights for a...

It's like that part of the forum is not even there. Click on the link and it just sits there. I have a saved link for a thread in that forum and it will not even load. The NH Buying/Pricing seems fine along with all the other forums. Could someone look into this please. Thanks Randy

On my TC35 attached to the drawbar as indacated in the image below by a yellow arrow. What is this for? Thanks Randy

be careful removing your grease gun tip from a zert. mine got stuck and when it came off my hand went flying back and hit the FEL brace. picture tells it all. Randy

I was shocked when my NH dealer told me what he sells wheel weights for on my TC35A. He charges $1.25 per pound. That sure seems a bit high to me. Anyone know of any place cheaper for wheel weight that wil fit my NH? Thanks Randy

I was thinking about painting my BB because of a little rust. Someone told me to use roll on bed liner? Any truth to that? Thanks Randy

Can I remove the reflective tape on the rear fenders on my TC35A with workin lights and still be legal when driving on the street? Thinking of using one of these lights below. Thanks Randy

Have a neighbor that want's me to start mower his 18 acres every other month. I'm thinking $45 and hour. I'm in northeast Oklahoma. Is this to high or low for my area? Thanks Randy

It does fit the contours just fine except for one thing, you can't go into high range. The shift bar hits the box never letting you select high range. Easy fix though. First pic shows narrowing the gap on the lower flat bar for the shift linkage.

I\'m a daddy of a new bouncing baby blue boy. I'm a daddy of a new bouncing baby blue boy at a little over 3000lbs and about 140 inches long. The dealer delivered the tractor at about noon today with a full tank of diesel and ready for workin. I was like a kid in a toy store told not to touch...

Are they any good? Looking at the 70 inch. There site states this ------------------------------------------------------- A-frame and gearbox assembly can be reversed for reverse rotation ------------------------------------------------------- I assume it can also be a reverse tiller correct...

Website http://mynewholland.yellowbrix.com/ Is there any benefit joining My New Holland at there website other then NH just gathering infomation? Thanks Randy

16LA Front Loader Self Leveling Kit. Is there such a beast and what is the cost and where can one get the kit? Thanks Randy

The dealer used water and antifreeze for ballast in the rear tires on my new TC35. That's going to make them rust out for sure isn't? Randy

TC35A height with ROP\'s folded down? I can't find and specs showing me what the height of a TC35A is with the ROP's folded down? I don't have the beast yet and I need to order one of those cheap $700 car ports to park it under. Thanks Randy

Took the plunge today and bought a TC35A with a 16LA FEL. Dealer had to order the FEL and bucket so I should get it either later this week or early next week. Wanted a backhoe but just could not justify spending that much for what little I would use it. I'll just rent one. Have a few...

Was quoted $23,850 for a Branson 2910i with BL10A FEL and a 7620 backhoe? Is this price to high or to low or about right? Thanks Randy

Can\'t decide John Deere 3320 with 300CX FEL & 447 Backhoe New Holland TC33DA with a 15LA FEL & 758C Backhoe Both have all the bells and whistles. Both 4x4 and close to the same price, Deere being just a couple hundred more. The Deere seems to have a better constructed backhoe then New...

I'm wanting to get a new tractor, more so a Jinma 4x4 able to handle a backhoe. I have not been able to find anything to compare and find out what the resale value for my tractor is. Do they make a NADA or KBB for tractors? What do some of you think I should start off for an asking price? I...

Hello all Are the Farm Pro tractors the same import manufacturer that Rhino International were? Did a forum search and see a few are satisfied with thier Farm Pro's. I have an old Rhino International 2220 that I have owned for 6 years. I have worked this thing hard all that time and it's...