Search results

I've got a little 25 hp chinesium tractor. So no real formal specs to toss around. I rebuild this thing new last summer. All new internals and seals. The sleeves are wet press in with two 4mm thick orings as seals on the bottom of the sleeves. Seals off the coolant from the oil sump. I...

I had freshly rebuild my jinma farm pro 2420 last summer. Had very little hours on it. Checked the oil this spring and it was full of antifreeze. I tore this thing Down and inspected it with a fine tooth comb. No cracks nada. I added pressure to the coolant side and it seemed to be leaking from...

I hope somebody will give me a little direction or outside insight. Please! I have freshly rebuild this little tractor last summer. Everything new but the block. It was meticulously build to the best specs i coukd obtain. Furthermore, It was used lightly and only a few hours this year. Never...

Hey guys, I’ve got a farmpro 2420. I started having overflow out of my vent tube. (Problem)lol Please read below before rushing to give advice. Likely already checked the basics. Well after inspecting, it appears I have air feeding into the system. Let me explain. On this tractor there is...

Hey guys I have a 20 hp farmpro / jinma actually a 2420. I’ve been battling for a while! I’ve resorted in a complete rebuild inside and out. Everything is brand new! Yes oil pump also. When I first cranked it up I would get about 20ish lbs of oil pressure at a little above idle. When I reved...

Hey guys I have a little two cylinder diesel Tractor With solid lifters. It’s been years since I’ve had to set valves and my memory is rusty. This thing has no manual but but I know the gap tolerance. Can anyone help refresh me?

Hey guys I posted the other thread about the injection pump. I figured I'd post a thread that isn't labeled so specific to be misleading. This tractor is new to me and so has had me confused with some issues. At first it had a knock in the rear two cylinder engine. Turned out it was fuel...

Hey guys I know most of you will grumble about chiniesium tractors but that's what I got. I just purchased a little farm pro 2420. It had a knock in the rear cylinder. There was some white smoke and more if I throttle up. sooo off to the races to figure it out. I noticed that one of the...

Hey guys I know most of you will grumble about chiniesium tractors but that's what I got. I just purchased a little farm pro 2420. It had a knock in the rear cylinder. There was some white smoke and more if I throttle up. sooo off to the races to figure it out. I noticed that one of the...

Hey guys, I just bought a farm pro 2420. It had a slight "what I think" to be a fuel knock. I noticed it was missing a stud on the rear injector. So I cleaned removed and cleaned the injector and replaced the missing stud. This cured 80% of the knock! The guy I bought it from did say the...

Hey guys I posted another thread asking about fuel lines.. Now that I have that worked out thanks to you guys I have delved into deeper waters... Let me start by saying I came up on this ole Bison II almost free.. I traded an old 88 dodge dakota not running in real rough shape for it.. I gave...

Hey guys it's been a while since I have posted here but now I find myself needing a few questions answered. I am new to diesel engines and have acquired a little bison 25. It has ran down quite a bit but still repairable. The lines on top of the injectors are rotted and just done. They look...

Ok guys, this post will be a picture heavy illustration of my disassembly of the front valve bank on my International Harvester 3414.My machine just so happens to be a bc144 english gas burner.. I am also posting this as quest for help and suggestions.. I know there are few posts floating around...

Hey guys I have done a lot of searching and have plenty threads regarding these old odd balls but none that has been helpful to my issue..... Let me explain my issues and any help will be GREATLY appreciated.. I bought an old 3414 case IH backhoe.. I think the backhoe part is another model...