Search results

I'm wanting to wire up a relay like the one in the pic, but not sure what all I need the diagram looks like this, but not sure what to ask for at the store. http://images.the12volt.com/12voltimages/turninglights.gif

I have had a 8' wide 16' long and 7' tall, basic metal portable carport given to me, the only thing it is 120 miles away. I have a trailer large enough for it to set on and can load it with out taking apart, but not sure the carport could with stand the winds at road speed. Anyone hualed these...

Just wondering if the axle placement is different for a gooseneck flatbed vrs a bumper pull trailer? I have a 26 foot flat deck and was wanting to add about 2.5 foot dove tail to it for making loading a little easier. according to the two different formulas I have found I am going to be just...

Just curios what everyones favorite row spacing is for a garden? I am in the process of gettig a few single row equepment and working on a garden this year. My tractor is set with the rear R4's at 56" from center of tire to center of tire. Seems a little wide for single row spacing but not...

With all the talk in other threads about home built ballast boxes, I have decided to build one instead of using piece of equipment for weight all the time. I'm looking at a concrete weight at approximately 1400 lbs, is this seem to be a safe amount for mine, I have a 3410 and the info I find...

I'm looking at buying a 3PT spreader around the 500 lbs range, Just wondering which ones people really like and which they have had real trouble with. I plan on mostly fertilizer and possibly spread grass seed every once in a while but not regularly. Would like one that you can select to...

I have just over two acres of yard I am planning on adding fertilizer, lime and grass seed to in the next few weeks, I am planing on having the fertilizer company mix all the stuff together and put in the buggy so I can spread it all at one time. I was wondering if (I think it would be better)...

All the talk about buying and building toothbars, I'm thinking of building one now. I think it would really help with some of my projects, so my question is which size shanks and teeth are best sized for my loader and pros and cons of either the cast or fabricated teeth? Also what is the best...

Been trying to figure out were to mount some work lights for the front and rear of my tractor, and was curios what light patterns everyone likes to use and which work better for what applications, such as flood, Trapezoid, and spot.

I'm going to take a quick hitch and attach a SSQA plate to it, for using boom poles and blades or what not on my front loader. Just curios if I should just attach the SSQA plate flat to the quick hitch or if I should kick the bottom out some to provide a little more roll back angle?

I"m planning on putting some manure on my garden site this winter, and have heard different opinions from people as to what type to use, some say horse manure and some say cattle manure, is one better than another? I can get either one when I do this.

I just bought a new set of blades for my rotary cutter and was wondering should I sharpen them a little more or leave them as is? They are not near as sharp as a set of mower blades but do they need to be?

Be looking for new blades and every place I have been first thing they ask is what brand, so I have no idea what to tell them. Can anyone please help id from the pics? I do have one place I think will be able to match up the blades but it will be a few days before I can get over to there...

I have been using my grapple for a while now and each time I hook and unhook it, I have to route the hoses up the loader arm and to the outlets next to my loader joystick and then wire tie them up out of harms way. I have decided to mount the hoses permanently to the arms and put another set of...

I was looking into purchasing a cylinder for my grapple project and was wondering what is the difference between a ASAE and NON ASAE cylinder??

Well I picked up my harbor freight quick hitch a couple of weeks ago and will be using it in the next few weeks but need to get some of the adapters for the hitch pins, I have six implements right now I need to convert to fit just wondering if anyone has found a cheap place to purchase them or...

I'm looking at building a set of pallet forks and also a grapple for my SSQA loader, and have been looking at buying but just can,t justify the cost when i can build it myself. Plus it is something to due, anyway is most people using normal mild steel, or something stronger? I know a few...

Just wondering if anyone had an ideal of how wide the tubing on each side of this would be, Not sure if it is 4" or 6" wide?

I'm looking at attacthing a lean-to to the side of my pole barn and not really sure how to get the top to seal up next to the exsiting wall, because I'm going to drop the starting point down the wall from the top of the building about 5 foot. The buildings side wall is 15 foot and I want the...

I have a kubota tractor with a 8.5 gallon flow rate, I am adding a third function valve off the power beyond port and was wondering if it would be OK to use 1/2" I.D. hose or if 3/8 would be better. I have access to the 1/2" for nothing were as I'd have to buy 3/8".

I have one question that I've searched for and can't find a good answer. On a WR Long full function third valve, do you Tee into the power beyond hose coming from the loader valve going back to the tractor, into the WR Long, or do you remove the hose from the tractor and go into the valve and...

I have searched and searched but can't find the exacted answer I'm needing on this. I'm looking at a WR long third function valve for my L3110. How many lines hook up to the block on the valve? The best I can find is a pressure in and a pressure out, and two work ports for the cylinder is...

Just built a grapple to bolt to the top of my bucket but not sure how to determine were to mount the cylinder as far as angles and distances from the pivot points of the arms, any help would be appreciated.

I have a Kubota L3410 and would like to put a rear remote on it. The dealer is asking 1000 dollars for one factory bolt on. I am thinking of using a after market valve for about a third of the cost. I also have been thinking of just using a electric diverter valve so I have less hoses and...

I have a Kubota 3410 And FEL without a QA bucket. Was wondering how hard and any Ideals to making a QA type bucket so I could build a set of forks and what ever else I think Of.

What are the big differances in the two models and is the L3400 that much less of a tractor?

Anyone have any info on these type of cutters? A guy wants to trade a like new 6 foot for my 5 foot king kutter brand. But I can find them on the net.

I found a 1" long crack at one of the welds on the lower swing pivoit of my case BH , and was curious as to which welding rod would be best for the repair. I was looking at a E6011 3/16" but not sure if that would be best. The steel is about 3/8" thick.

As you may know I just bought a used L3410 and am giving it a oil change But I have no books . How much oil does the motor hold and is their a place online that information can be found.

owning-ML-754282-ML- Kubota specific post

Post deleted by MrZukerman