Search results

Steve, your link is exactly how my loader is plumbed currently and I'm not wanting to disturb and of that. I am wanting to add a 3rd function and rear remotes to operate a lane shark and a 3 pt log splitter. I have an appointment with a shop hear locally and he has the correct equipment and...

Thanks for the thoughts, I'm still trying to figure this one out.

I have a Yanmar US35D and when the guy I bought it from installed the loader he cut the line from the pump, run hoses to the loader control valve, and then to the back of the tractor as it would normally go. I'm now needing some rear remotes and would like a 3rd function for the loader...

Does anyone know of a FX26 that might have a buildable engine? I've got one that is not repairable (engine) and need to find a replacement. Maybe something that might interchange and bolt it?

I am in the process of rebuilding a FX28D engine and have this sitting on a stand. Has anyone ever taken the gearcase (timing) cover off of one before? I have all the bolts out and there appears to be a couple of dowel pins in the hydro pump area but I'm afraid to put much pressure on the cover...

Does anyone have instructions on how to set the governor on a 2304/1030? I just had the injectors done and pump checks good but it is pouring black smoke and the shop is saying the governor needs help. Any info is appreciated.

I have a DX24E that has been a good little tractor. Most of my time on it is mowing with the 60" MMM. It has developed a problem of just cutting off usually when going up a hill. The tractor is not in any bind or under any extra ordinary load just like the key is cut off. It never fails to...

I have a Yanmar US35D which is supposed to be the same as a JD 1070 and the steering cylinder has developed the runs. I ordered a kit from JD and it is wrong. Any ideas on where to find a seal kit? Hoye is no help.....

I have bought a 1070 and it appears to have Hyd problems. The loader is slow and jerky when going up and the steering is also erratic. I am going to change the fluid and filters but I haven't found the screen on this tractor, does anyone know where the hydraulic screen is on this tractor? And...

I recently bought a DX24E for my yard work and something the wife can use also. I installed a spinner on the steering wheel and noticed that it (the spinner) will not stay in the same spot. What I mean is the steering wheel won't come back to the same place twice after a tight turn. If you turn...

Does anyone have one of these/parts or know where one can be bought? I need one for the engine so a used one needs to be free and have some amount of compression. The one I am looking for would be an older unit, maybe army surplus. Thanks....

I am going to buy a new or used lawn tractor this year (soon). I do need 4wd for the hills I have and these seem to be the choices I have. Before anyone says JD X700 series that thing is huge. Does anyone have any information good or bad on both units to help my selection process? I know the...

I am finally looking at used trucks. What is the latest year model I can buy without the convertor burn system on it? I am leaning towards dodge but tell why I do and don't want one. The V-10 ford has done well but ford has used too many different engines and I've heard horror stories on...

Has anyone added one? How?

I just bought a 2009 Polaris XP. So far I am very happy with this machine as it will be my primary hunting buggy and also for some light work. Any reports good or bad on this machine? Has anyone bought a top hard or soft? Windshield?

A) When all 4 tires pull at the same time in the same direction? B) Makes it a lot harder to get out when stuck? C) All of the above? The correct answer is C :D

A barrell JUST BEFORE one of our major holidays in the year, DO YA THINK THE OIL COMPANIES PLANNED IT THAT WAY? Yes I meant to be yelling because I'm fed up with this!!!!:mad: Yea, it didn't go up but about $20 bucks in June.

Can anyone tell me how to break down Yanmar engine numbers. As an example 3TNE82A. I'm guessing that this is a 3cyl with 82mm bore? Any thoughts on the rest of it?

Does anyone have a turbo installed on a 990, or is there an aftermarket kit to do this? I am looking for a little more power and a more efficient engine.

1) Building a cage to keep limbs off of me when running the bush hog is time consuming and I am fast approaching old fart status. (Very tired) 2) When spraying flat black on the said cage if overspray gets on the 18 year old daughters new car.....she will scream!!!!

I have a Mitsubishi D1850 (4cyl, 2wd) low hours with bush hog, back blade, and disc. Also have a Hinomoto E280 (2cyl, 2wd) with a disc. Any idea what either are worth. Both have less than 900 hours. Both run good with no back pressure or leaks.

Is there anyone that knows where I can find a yoke to fit a Yanmar tiller? I was given a red tiller (has an input shaft that has fine splines and is about 1.125 in dia). I don't have a clue where to start looking.

Just got my new to me Yanmar home. I'm going to have to buy a new disc and was wondering how much I can pull. It is a US35 just like a Deere 990. Was considering this one. Any comments??? Tractor Supply Company - 6 1/2 ft Box Frame Disc

OK, I am not crazy or color-blind, but the yanmar I picked up has purple antifreeze. Test way down on the freeze scale. Is this stuff any good or should I go ahead and change it. Going to change all other oils and filters.

Just got my (new to me) US35D home. There is a shift lever I can't identify. It is located on the right side just above the rearend locking lever. Anyone got any ideas? JD 990 dosen't have this lever, I'm sorta hesitant about moving this, and I am at a loss.

Has anyone any information on these guys? Are they still in business? I bought Hino parts from them before and now I can't find them. Thanks

Has anyone had any dealings with this company? Am looking for a tractor with loader and the seem competitive on price. Looking for a fx42d. Thanks.