Search results

Have you replaced the washers on the deck? I think the set up of the washers is supposed to allow the blades to slip on the spindle if you hit something. The washers are cupped and I think they are called a bellville spring but I could be wrong. Here are the PDFs showing the spring plate the...

I did birth the BX1500 and the L4400 the same. Same lights and same method of mounting and wiring. There is some glare with the lights behind your head but it works well for me.

Look at the hydraulic/pump and motor combination on these Bad Boy mowers at TSC. The ones I looked at were the throw away hyrogear units not like the commercial hydraulic pump with wheel motors. I would stay away from these units.

Here is another from this evening. Mind you there is grinding and clean up but it's not coming loose. I weld around and let it cool.

Well I started welding the floor pan panel in here is a pic of my horrible mig welds lol

I have neglected to update this thread for a while so I attempting to catch it up to speed. I ran into a problem when first attempting to mig weld from difficulty starting an arc and just happened to notice that the wire feeding the mig it power was loose near where the welding wire feeds into...

So taking the advice of the TBN braintrust I picked up a cheater lens. Wow I can see and that helped. I also picked up a better solid brass ground clamp and that made a difference. I also practiced some more and that always helps. Here are a few pics of the welds. This is the jeep...

I checked the gas mix and it's 75/25. I picked up some of the Lincoln L-56 0.30. Then ran some wire and there was a world of difference. This is the first practice plate that is 1/8" thick the first run. It seemed like 20V was a setting that seemed to be where it welded best on 300"...

All right guys. I have stick welded for years but just recently bought a Longevity Arcmate 205P. I was using Radnor .o35 wire ER706-6, and it seemed to pop and spater a lot. I was welding on clean metal that had been ground brite. Is there a premium MIG wire that I should be using? Also I tried...

Sorry about the order of the pics as I was posting from my phone. Here are some pics of the install of the 27Watt Leds from LEDstore. I mounted 4 on my L4400 and 4 on my BX1500. I Tied into the work light circuit on both tractors and I used a 10Amp fuse at the point where I tied into the...

Here is my favorite syle of hat when its cold. it actuall keeps my head warm.

It looks to me like I can make out the brush holder in the pic at the top. I will post some pics of mine later today. If you still have the cover off take some of the area above the bearing Like in the first pic the brush holder has 2 wires going to it. Thanks

Spent this evening harvesting rocks from the small creek and doing a little erosion control in the bigger creek. Wonder how much the rock weighs in the bucket? The bucket is a 72".

Well I finally got around to taking some pics of the fuel set up. My set up is similar to LBrowns but is made to able to load in my truck to get fuel(no delivery in my area). The fuel pump sets on the top rails and is easily removed by springing the sides in a little and lifting the unistrut...

This is how I think of Jack and always will. I will think of him every time I get on the tractor or walk in the woods. I would have to battle with him to make him stay home when I went hunting back on the ridge. More than one time he would escape and track me down and change a hunt into a walk...

My Jack Russel Terrier has ended his reign over the little patch of ground here in WV. He was 13 or 14 years old and had a lot of life left in him. Tough to lose such a loyal companion. He was the kind of dog you would wish on a kid when they are about 7 years old. If you were out and about he...

After the dust has settled from the widespread storm related power outage I am thinking of adding a PTO generator to the fleet. The best deal for the dollar appears to be the HF 15KW PTO generator. My questions to the TBN Brain-trust are: Do you have one or have experience with one? What are...

I will not be able to cut the one with the helmet in the pic because it drops straight off behind the log and it would be dangerous to cut it with the equipment I have.

Here are some more I snapped with the smart phone. After looking at these pics they didnt come out so well. that log that the helmet is hanging on is 2 foot thick at least at chest height.

Here is a wild cherry the first was an oak

We were hit hard and I made a run around the property at least as far as I could get.

I was about half way through mowing and I heard a noise a sound and felt a vibration. I stopped and did a once over and found a spindle nut loose and the bearings were shot. I put in and order for bearings and seals so I guess it is time to do my first BX1500 repair. The tractor is a 2005 model...

I took advantage of the Longevity monthly special for the lucky TBN member who e-mailed after they post the special. I decided on the ArcMate 205P | IGBT 200AMP PULSE MIG WELDER WITH SPOOL GUN CAPABILITY AND 160AMP STICK WELDER. Does anybody have any experience with this particular unit...

I know the rule of thumb is 5 HP per foot but my BX1500 only has 15HP at the engine and I run a 54" belly mower on it. Are finish mowers less of a load? I am thinking of getting a rear finish mower for the L4400 and I would like to go as wide as possible possibly 96". I have never used a rear...

Here is a smaller load that I went after today.

Thought I would post a few pics of the mountains where I worked this week in Southern WV.

I made a couple of poor quality tractor videos of using my tractor while I was hauling firewood back to the wood lot. I had my old camera and decided to video a trip downhill and then another back uphill. I couldnt figure out how to load a video here on TBN so I just put a link to the video on...

I ordered an ECHO CS330-T top handle saw. I liked the looks of it and I have a few apple trees and about 40 acres of brush to whittle around on. I have a larger saw (Sindawa 488) that I use for firewood. Just wanted the thoughts of others that may have one or used one.

Merry CHRISTmas to all. I hope everybody has a great CHRISTmas HOLYday.

Tomorrow my beautiful little baby girl is getting married. I will be a mess. This horrible guy is taking her away. Well maybe he's not horrible but he is taking her away. I have enjoyed raising her. She is always the one to challenge every rule you make. So tomorrow at about 1pm EDT pray for...

Here are some snake pics from this evening. Test your snake ID skills and guess what they are.

Looking to get a Landscape rake to clean up the rocks of various sizes out of loose soil of a few projects and I want a rake that will angle. I have a L4400 HST and I use a 7 foot BB so I thought I would get a 7 foot landscape rake. Here is a pic of the current project from a barn demolition...

My wife is asking for a gasoline weed eater. So like a good husband who hates to run a weed eater I am looking for one that will be a joy for her to operate.:) She has tried using my brush cutters and would only use it for a few minutes and complain of the vibration hurting her. I was thinking...

Well I have done it now I was using the grapple to extricate small stumps and caught the rake as I was backing up and bent the Dump cylinder on the right side. I got online and have been searching for replacement cylinders and it seem as though they are and odd size. The tractor is a Kubota...

I have this old dairy barn that is and has been way beyond repair. The fellow that built it used what he had available at the time to build it. He poured the concrete for the foundation, floor and the wall bases with rock and sand from the creek and even field stone. This made the concrete very...

My mother was attacked by a dog and just so happen I had my camera. Oh the carnage. Nothing can bring on a smile like a child or a puppy. :D Merry CHRISTmas

I wanted to wish all of the folks on TBN a Merry CHRISTmas. For unto us a child is born, unto us a son is given: and the government shall be upon his shoulder: and his name shall be called Wonderful, Counseller, The mighty God, The everlasting Father, The Prince of Peace. Isaiah 9:6

I had to do some research for a large group of diesel generators sized from 6.5KW all the way up to 1200KW(1.2 Megawatt). Part of the research involved calculating the potential fuel consumption of the units. We all know that the fuel usage will vary with the load and that leaves an infinite...

Been having problems with the septic system. I moved into the house in 87 and had installed a correctly installed system when I built the house. It has a 1000 gallon tank that I had pumped out about 2 years ago. It seems as though the leach be will no longer take the amount of water that we are...

My darling daughter and her boyfriend went to the WV state fair and they saw tractors and she thought of her dad and took pics. I love my daughter. Her are a few for your enjoyment.

I was brush cutting today because I always seem to see a copper head or two around this time of year. I guess they come down close to the water to dine. I saw this one stretched out in the water as I was going by on the tractor. This one was about +or- 27" long. He even posed for a pic.

In case someone is in the market I saw a L3700SU and a B3300SU sitting side by side perfect for some pictures.

I have read about the Gator Blades and I wonder if they rob any of the power. I have a BX1500 and a 54" deck and it does good on the factory blades. Has anybody used them on the BX1500 with a 54" deck and if so what are your thoughts? Thanks

Worked the L4400 on the slopes with the FEL I had posted a while back about the Sub Soiler(SS) on the FEL and I posted some pics of the hill side that I loosened up early in the winter. Spring is when I can do alot of dirt work without stressing the machine because the soil is loose. The...

Worked the L4400 with Anbo grapple lifting rocks today. I was working with the L4400 today and I was warned about the weak FEL. Here is a few pics cause I know that you all like pics. The L4400 is a great hillside tractor. I have the rear R1s set to the widest setting. In the first pic I am...

A buddy of mine sent this to me. I thought this was great. This guy is crazy(for catching these snapping turtles). Kentucky Turtle Man

I have a Kubota BX1500 and I was going through the maintenance and I could not find a grease fitting for the front axle pivot point. Does anybody know where it is? Is there even a grease fitting? I have looked and I cant find one.

What is holding this building up? I thought I would post this for a laugh. Could this be a helium filled building? Could it be attached with a sky hook? no wait I know its been photo shopped? You decide.

I bought a used grapple and I currently have it set up to operate off of the rear remote. I havent seen a good mounting system for the front Hydraulic quick connects on the FEL(pioneer type). I am presently connecting them and strapping it down with a bungee cord and this is not what I think is...

I know it is a goofy thead title. But hey I was out in the cold to long today. Neighbor down the road had a few trees damaged in the snow storm we had before Christmas and I went to give him a hand. Here is the tree before starting. This tree is some type of cedar that is about 45 years old.

I was researching the Kubota Parts manual and looking at options and found the Bucket level indicator option and decided to order one up and do an install. I will post pics later today or tomorrow.

I ran across something today while I was doing the break in on a small diesel generator. To adjust the frequency you have to precisely adjust the RPM's. While I had the equipment available I thought I would check the PTO RPM's on the L4400 HST to see how accurate the speed is well I found out my...

I have been running the 18 year old Generac (bottom of the line 4000w gas generator) generator. I wonder if any of my fellow TBNers have any experience with the Aurora Diesel generators. I have been using the 4KW thats running since it was new for backup power. We had the heavy wet snow that hit...

I see a lot of "How many hours" threads and it may have already been asked but here goes anyway. How many hours do you have on your tractor that has a Hydro Static Transmission (HST). It doesn't matter what brand it is I am just curious about age survival. If you have a HST tractor that had a...

I just got a new to me (used) Anbo grapple. I was going to build one but run across this deal and needed to use it now. Its a GRM 66" and I would describe it as a grapple rake. I will post some pics later today. Any info would be appreciated.

Helped the neighbor cut a couple trees down. Here are a few pics. The trees looked much bigger on the ground.

I am getting ready to make a grapple for my FEL and the only issue in my way is what to use for bushings on the pivot points? I know I could use something like black pipe but I would think it would be to soft. I do not have a lathe so I want to stay with what I can make work by purchasing the...

I picked up the Harbor Freight Metal Cutting Circ Saw #8897 and it does a great job. I hope they come out with a 14 Chop saw style with this blade and RPM. I cut some 1/4" mild steel plate at a rate of 6" in about 40 seconds and even tried some 3/4" and at a rate of 6" in about 120 seconds. I...

I have a 7 foot BB on my L4400 Hst and I have found that if I am doing any aggressive work it needs weight to heelp it into the ground even with the ripper shanks. Do any of many members add weight to their BB or am I alone here. I added a 8" Box Tube off of my old tractor onto the BB to use as...

I was working today in the garage on a few projects like a Skid Steer Quick Detach By # point hitch and I think it turned out ok. I will have to await till it warms up to paint it though. I tried out a sub soiler that I adapted to go on in the forward direction. I am going to use the sub soiler...

My friend has a L4400HST and was questioning the FEL lift ability. The first pic the location of pressure relief block. The second pic is the hex head that holds the pressure relief spring and adjustment shims.

I can' leave my tractor alone for a minute if it not the wife or my son the dog jumps on it and everybody knows that dogs are lousy tractor operators. I included a picture of the rock that the dog dug up (nobody told him how weak a LA701A FEL is) so anyway there will be no kibbles for him this...

I have been working the L4400HST a little, while off from Cristmas. I had to do it eventually but it still makes you want to pot a little I was pushing over some dead trees and on caused anothe to fall and it dinged my hood. oh well I am glad it was the hood and not my head. I have been working...

I have a question to all of the seasoned FEL equiped tractorowners out there. I have run smaller utility tractors (35-45 HP range) for about 20 years but the L4400 is the first one with a FEL. ere is the question, does a tooth bar really help a great deal when using the FEL? If so, what are the...

This is my first time on TBN though I have been reading the posts for a few months. I have ordered a L4400HST from Brady Barlow. I also am receiving a BX1500 54"MMM used at the same time. I appreciate all of the info and advice that floats around in the forum.