Search results

i've been to and downloaded the pdf of the user/owners manual for this puppy. 1) after a serious pressure washing the decades of mud buildup, got it clean enough to see and break the bolts and nuts loose. 2) got out a chisel and hammer to test if thats what it needed to pop that lid off the...

I’m starting this thread to placeholder so when I have power for the phone I can actually search threads. It seems the high - low transmission shifter is stuck in the lower 4 gears from this “shuttle shift” design….. I know my way around search engines but, this time I’m falling on my face...

so I have been curious... there are several ideas out there but, I have not found one close to what I want to see how costly it will be. Its a well establish adapter to put a PTO reverser on tractors or Unimogs for snow throwers etc. This design I find very enlightening because it is talked of...

I’ll findout Saturday when I go see it & hopefully buy it. My 1998(?) 7260 standard 4WD is in a coma currently (thread in here already) and I was thinking about swapping that front axle under a 2003 7360. The 7360’s front axle is advertised as needing front wheel seal replaced. I figured...

I have the Cub Cadet 7260 with the Mitzu 1.3L diesel block I have cross posted this in the Mahindra forum......( byte tongue) I hope this is allowed..... I have read all over the place over the previous 5-6 years that the engine is the same exact block. And as such with all those parts...

I have the Cub Cadet 7260 with the Mitzu 1.3L diesel block I have read all over the place over the previous 5-6 years that the engine is the same exact block. And as such with all those parts interchangable..... these all have the 1.3L mitzu block as far as i can tell. 2310 25 hp 2002 - 2006...

So I had done searches last year and just “saved” the page 1 of what seemed viable threads on a desktop over 19 months ago. That folder? ...gone. The had been comments made in threads on the mahindra had at least 1 model that was a cub cadet clone. Problem is I can’t figure out what key words I...

Having read threads /seen/downloaded pics of several ideas here and other forums over the decades.... I have one to share here. I’m Up-cycling (pun enforced) to provide better visibility regardless what’s I’m doing in OR off the lil’ tractor. found the local cycle shop (Sprockets) and asked...

Tractor data: ~2000 m/y Cub Cadet 7260 4WD manual shifter w/ 417 FEL & Ford 917 Flail mower Yesterday (Saturday noonish) while building a special pallet for the transfer tank I was prepping for 1st mowing of the back yard. Fluid levels = good Battery = good (very recently desulfated) Zirk...

So I recently acquired this backhoe in a less then cared for condition. I found a few issues and have fixed them for current stable use. (other pictures of it posted in the BH use thread and another thread as well, IIRC) This question is should I try door #1 or door #2? Or do you have a Door#3...

Okay here are some questions based in ignorance. The old hay bales spike that is mounted in bed of truck had a electric motor die a rusty death. As this system is a power up gravity drain dedign, may I safely assume that one could safely do the following idea even if my vocab is wrong...

I've reading up on PTO pump filter setups and I guess I want to ask what micron level you personally use on your PTO pumps? I know how subjective this is and how anecdotes are very valid. I prefer them as it draws a better picture for me on what your environment is and why you chose a fine...

I just got home from a local JD dealer that used to be a Cub dealer as well.... I have learned some new vocab but, not sure how to best search the forum with these words.....because they are so common in our language that the engine should give me nearly every thread in the forum... Raw data...

So here's what I've been doing for a few months now. Making lists of viable sized backhoes & flails for my Cub Cadet 7260 (~25hp) The fun of this has been complicated by going through warranty replacement of my phone 4 times since last May. My lists had disappeared or got delete by my mistake...

"Teacher, my brain is full, may I go home?" (Yes I've slightly paraphrased but, I have only gained more respect for his humour over the decades since reading them in the paper) Okay, I'm a couple hours deep and still have at least a dozen more threads (in separate tabs) to gleen through and...

This idea came to me a couple days ago and its based in solid logic from my heavy partisipation in the ultimate subaru message board. Where we were figuring out the bolt on parts for theoretical or proven improvements of our Subies. Cases in point: 1) we figured out the direct bolt up swap of a...

From what I've come to understand "power beyond" in theory or should I say practice? It is basically a way of Daisy chaining hydraulic impliments like surge protectors? I've tried several times to do search's and gotten distracted by life off line & either mixed up memories or forgotten what...

I've tried to search here and also in googles main page and just can't quite find the root. The Mahindra BH76 as its advertised is made by ______? I recall looking at a bunch of threads on BH stuff, the most awesome thread being this info-jammed one here...

So I have these wondering thoughts: advice prior to this was in the separate thread on changing the temp sensor when I swap out the thermostat. I had already ordered and received the thermostat & gasket to replace. Have not done it yet as the chicken coop is almost done & I haven't used it...

1st off, I know this is one of those "I should be able to solve easily" thoughts in my head but, I'm not finding an easy solution so far. I have done the garden hose wash out of radiator twice and used the pressure washer on the engine bay(not the rad core) too clean it off good. here in...

-[edited because i finally found the way to accomplish this little addition] here is what I'd like to use. (fingers crossed I get to upload it here as a newbie)

Even thought I did my best to keep the tires all aired up .... one finally gave up. the sidewall has cracked so bad the rubber has partially separated from the ply's in a small area. having read this thread today while searching on a different topic...

I've got a theory/question to a problem...the 370D is a gravity feed fuel line to the injector pump on side of engine block. What if I put a low psi electric pump inline (for test/purging/bleeding the air out) to help with getting fuel to the injectors when i loosen each pipe at the top of each...

So This oddity gets its own thread. Specific stats: cub cadet 7260 4WD standard diesel While cutting up the soil & removing it to put in a chicken coop with cement foundation..... the twin curled blade type tiller (don't remember the correct name for this old school tool) was cutting great...

(newbie wave) I've spent the last 90-odd minutes with the search functions and tried what *I thought* would be wise words.... struck out across the board. Problem: hydraulic system is water contaminated.... by me, accidentally- it seems. I went to pour some sealed 5gal. jug of TSC 303 that i'd...