Search results

Every time I go to W/M for anything I always walk past the ammo area to see if any 22's made it to the shelf area. Well today for the first time in years they had some Winchester 22LR 100 count boxes for sale. No big deal but I was happy to see it. :D

I bought this Mahindra 5010 HST cab new 12/2010 had factory add 2 rear extra remotes. I'm not using the tractor much anymore so figured I would try and sell it. I'll list all that goes with it and maybe get some idea what it might be worth in a private sale. The tractor is located in Arizona and...

Finally was able to remove my drain and vent plug from front axle drive unit, what fun!:eek: Anybody know what size/pitch metric/standard those nice little pipe plugs are? I have done a search in the Google box but nothing came up like to try and find them locally. Might be nice if I said what I...

I hope the picture is clear enough, when tractor is running I have fuel leaking from this vent tube on top of valve shut off. It's leaking enough that I can smell it when in the cab. I only have the owners manual which shows nothing, is this normal? Thanks

I have a Mahindra 5010 with extra electric remotes installed at the factory to run my t n t set up. I had to replace two of my hoses and now my t n t set up will not work. I've tried to run tractor at idle and move the cylinders to get the air out if that is the problem but still no go. I marked...

I mounted these weights on the rear blade big improvement working with the blade.

Here's mine.

I went with the buckets, now the box blade works. :thumbsup: This set up with the buckets and the barbell weights gives me 510#'s each bucket took 2 sixty pound bags and the weights are 25#ers.

Inside.

I wanted to let some air out of my rear tires which have a stop leak in them from the dealer, not sure what kind. Checked air pressure first and nothing pressed the valve nothing? I'm guessing that the stop leak stuff has screwed up the valve so I'm thinking unscrew the valve and real quick put...

Well this should be fun, what is for sure the filters and fluids took my lunch money for the month! :shocked: :D

:welcome: I went with a standard pole barn type unit 30x40 1 walk thru door 2 8' roll up and 1 10' roll up for the tractor. Cement floor I ran electric, phone and water out to it but so far am just using the electric. I have been happy with it and yes it is a very basic unit. The only thing I...

Last year a poster asked what a "HOMER BOX" was and received his answer, here is a picture of my "HOMER award for being nice to the customers when I worked at HD. Kind of like getting a GOLD star when you were in grade school back when! :D

Not as NICE as yours or as big but I always like the way the stoves looked. Found this one it's propane fired keeps the house comfortable. I'm going to try and post a picture?

My 2010 Ranger HD.

Front gate lights but did not come out very clear with my small camera?:ashamed:

Yesterday I had been grading the dirt road out to the highway with the grader scraper and using the FEL to move dirt to some low spots. Came back to change over to the rock rake to clean up a bit. Not thinking because I had been using the FEL I took a big scoop of dirt for another low spot...

I have a 6' Modern AG Product RR light to medium duty anybody have any idea what price I should stick on it? It's in good shape trust me! :D

From what I have found seems like 16" and 18" length is what the store bought scarifier shanks come in? Anybody know if some company makes them any longer? The reason I ask is the QH system I have makes using the box blade shanks I have now(18") not much help. The only way to get them to dig at...

The new TSC store will be open for business this Saturday over in Sierra Vista, AZ. I plan on going just to see what they carry, I'm sure I will find something I cannot live without??? :D

My view from the front porch as I'm heading out to have my first coffee....work second.

Anybody else get one of these survey forms from Polk-Lepson research group?? Sorry forgot to add it is a Tractor Owner Study just wondering?

Anybody use Verizon high speed internet in there home they call it HomeFusion Broadband I'm thinking of switching over to them?? Anybody Good, Bad, Ugly! :D

Getting ready to set up my 55 gal drum for diesel and want to get a good automatic shut off nozzle that will work. Looking for suggestions from the TBN group. Thanks much. Bill

The reason I am so happy about this new Dealership is because they are only 52 miles away from my location!!!yippy!!! The dealership I purchased from dropped the Mahindra line of tractors right after I purchased mine. They were located only about 20 miles from me so that was a big plus. When I...

My pole barn went up in 07 I was in the $19K range also for a 30x40 with concrete floor. I kind of finished the inside myself still working on that part?? Good luck with your project, also go BIG you will not be sorry I wish I had gone bigger with mine.

Nothing like what you all get back east but for us it is an event!LOL:D

I have had my 5010 for a little over a year now and so far so good. I have my fingers crossed that she stays trouble free in the future. Found out that the dealer I purchased it from appx. 20 miles from the house is no longer selling Mahindra Tractors. I was told that any Mahindra dealer will...

I have a 2010 Polaris Ranger HD with RangeWare Cab system no doors yet but works OK for me.

Morning 68 and humid here we are in our monsoon season a few rain drops already hope we can get some more sure need it. So far this wet season 6.55"s here at the house would like to double that before the monsoon season ends next month.:thumbsup:

WELCOME from Arizona, you have a very nice rig hope you get alot of seat time with it. I will try and get a picture of my ride up and attached, not holding my breath on that. I'll be darn I did it....

Waiting for the coffee, VERY windy here the past couple of days and forecast the same the next two...ugh!:mad:

Morning all, I am do for my 50 hour service and was wondering if any other owners of a 5010HST have run into any problems or easier ways to get her done. Other than taking it to the dealer? I already picked up all the filters and fluids, the only thing I did not get was a new O-ring for the fuel...

Afternoon all, picked this heavy duty GS up over the past weekend. I used it a while yesterday to see how it would handle my on going road project. It worked better than I know how to use it? Kind of getting use to it today using the Hydraulic top link to feather the load out a bit. Yesterday...

Well it has taken me a little over a month to get the barn ready since I got the Mahindra so I could park her inside. A couple of pictures to show her all nice and warm on this very windy day here!!!:D

32 on the front porch getting up to mid 60's today so weather is just about perfect. The contractor is going to install my new 10' high door in the barn today so I can park the new tractor inside. My old tractor would fit with the ROPS down but not this one. Life is good and the coffee smells...

This is my '10 Polaris Ranger HD with RangerWare Cab no doors yet still saving my pennies so I can afford the door system.....ouch!! Mounted the front bumper with the winch put the spare tire holder on and a few other things to help me out when I get stuck. So far have not had to use them but...

Good afternoon all, found a used QuickHitch forklift heavy duty type branded with the Montana tractor logo on it. Just wondering if anybody might have a price on something like that? DHB Sorry Montana calls it a Pallet Fork which fits on where the bucket goes with the QH system. Also the new...

Good morning all, HAPPY NEW YEAR. 40 here and going up to mid 70's today. Yesterday while working on my road grading project I had to use the A/C to help cool me down.......As for New Years Eve I was in bed by 9PM and never heard a sound. DHB:thumbsup:

Anybody have any feed back on there use of Electric Solenoid valves working your remotes.

51 here and rain just to the west of me and I think that is about our high for today also. The 5010 blew the electric solenoid for the remotes yesterday when I was out grading the road. A call to the dealer first AM so they can come get her and fix the problem is what my day will be!!

33 on the front porch here, our high today low 60's perfect seat time weather!

Good morning all, well my 5010HST Cab unit was delivered yesterday afternoon. So far I REALLY like her, with 5 hours of seat time to get her warmed up not bad. The dealer mounted a used 6' heavy duty box blade on her so when she was off loaded I put her to work to see how she would handle. After...

Good morning all, well the coffee is on and while I am waiting just a heads up my new 5010HST Cab was delivered yesterday afternoon. I have been the proud owner of 2 CUT open seat tractors. But I have got to say after 5 hours of seat time yesterday in the Cab tractor it is sure NICE! DHB:thumbsup:

:)First stop here at the Good morning site. Nice to see that I am not the only person who gets up way to early every morning. But I have always been up early and I do not think that is going to change any time soon. It is 34 and foggy here this AM had a few rain drops last night and suppose to...

Good afternoon all, I found a site the other day that had manuals for the 5010 they were like $111.00 and I think another one was $80 something? Any how I cannot find and I do not remember the site. Anybody else know where I might find these manuals to purchase? I figure since I am still waiting...

Morning all, been around a while and after reading all the positive posts about the Mahindra unit went down yesterday and ordered mine!!!!! My old dealer that I bought my Montana from has just started carrying the Mahindra line on his lot. I went with the 5010HST FEL Cab and the factory is...