Search results

How has the toro held up for long term use? I've got a bigger model toro that I'm planning to turn into a mini sky trac. Planning to put a service truck Crane on it to use as the extending boom

So I picked up this 14ft winged back blade for $200 with cylinders. Just needs some welding. I need to find a power unit / hydraulic pump for it. I did get pictures of spare one the guy had in stock (wouldn't sell). Problem is, his are custom build by a local company and are roughly $700-750...

Headache rack is basicly the same thing as a roll bar. Usually used on work trucks and has mesh to protect the cab

. I would simply build your 460 up. I bet it would even tow that weight stock. There is a few cheap ways to liven up a 460. Aftermarket headers along with straight pipe, and mod the intake pipe so it breathes better. Google it though because I dont remember what all it was. My father's 94...

Another cheaper but not a great option is adding wheels to the back of your box blade or back blade. First picture shows just a few ideas. But you want it further out to get better results like the 2nd picture. Then leave your top link unhooked and you can adjust your height with the 3pt

If you guys can dream of it, go for it. This is my high school senior project. Started out as a $300 ext. Cab 4x4 ranger. I just removed the ranger body and built my own. Still needs roll bar and floor finished

So I've got a mini articulating loader that was built from an old case trenchor. Completely hydraulic drive. I know it is not plumbed the best either. Has one pump feeding into the 2 spool valve for drive and turn then from the valve return to another 2 spool valve for the loader. It is...

I would side with buying and then modifying. Worst is that you have to run C-channel along your tractor to mount the loader onto. Look for a loader off a farmall. They have a good subframe that attaches to the rear axle and are good heavy duty loaders. You will have to convert it to hydraulic...

I can about guarentee that the rear dif will not be hurt being towed. We haul wood with ranger trailers and have never had a problem

Another option, find a good condition single cab long box with topper 2.3l maunal 2wd ranger? Get 20+ mpg, and have a decent looking truck with a decent bed and could tow a small utility trailer. Extrememly reliable. Also are decent all weather vehicles if you have good tires and a little...

Out of the ordanary but I need some help. For my high school I have to do a senior project. Topic is fabrication and will be building a go cart/buggy. But I need a question that I can research and have a few good sources and few pages worth of work. Does anyone know a good question somewhat...

Heres mine. John Deere MT with ranger trailers. Black trailer is a long box. Gave 2 trailer loads to some older friends and kept one load. Them have a short box traile that is going to our landlord. Cut all dead wood that usually is on the ground.

Has anyone ever built a center counsel for their trucks or cars? Have a ranger and hate the stupid small plastic ones in it. Mine has bucket seats so I plan on building a full center counsel and wanting ideas.

No tractors yet in the woods but I figured I would show off our loads. The ranger is all from one dead elm tree and trailer is a mix of ash and cherry. Would have loaded the trailer more but was in a wet spot and truck is only 2wd and frame is not great. Had one more load earlier in the ranger...

That's because it it. It's my truck. All stock besides Toyota single piece dualie rims and flatbed. I will be doing a build thread on the truck soon once I pull it back off the road and work on it more. Heres a better picture of the duals

What do you all think? Total load with trailer and what's in the truck is about 6,600lb. Truck is squatting good but not as bad as the flatbed makes it look (unlevel flatbed).

Ranger is a small pickup. Will be selling what's left of it after removing the cab to fund this build. One thing I do not want to so is build off of the truck frame. I will be building everything custom. I plan on building the rear suspension so it pivots like a door hinge. It will be...

Anyone ever build a big gocart/offroad buggy? Thinking of doing one. Wanting to use a motor and tranny out of a motorcycle/dirt bike or 4 wheeler/3 wheeler. But maybe using a ranger or small Isuzu rear axle and creating a drive line somehow then trailer spindle, bearings, hub, and tires for...

Here is is. Is rough drawing but works. The carts themselves can be easily tipped by hand if loaded properly because of weight distribution. You lift the back and then the nose tips down. They pivot off of the bigger solid wheels and use the rounded bar to pivot on. Top left hand corner shows...

What is the real difference between regular commercial wiring and automotive? Only thing I can think of is automotive is more flexible but I could be wrong? Asking because I'm doing some aftermarket lights on a 98 ford ranger and have piles of commercial wiring out of a restaurant and it's all...

The ones I'm talking about are not for a forklift. Pretty hard to get a forklift into a 36in door in construction sites. Something like this and maybe raise it up higher

Not a shop question but need some advice. Our family business is looking an online bookkeeping website similar to QuickBooks. Quickbooks is out of the picture. Long story short and our secretary got fired and left us with a bad list of info for our QuickBooks and I have spent over 4 hours with...

Head to haul a brush hog about 40 miles. F250 that it would fit in doesn't have plates or insurance. So had to use my ranger and 4x8 trailer. Towed really good actually and probably over strapped it but road good. Yes I could have dropped the one side fully in the trailer but didn't know how I...

Got to love home depot. Guy trying to haul the pvc style deck boards. About 20 ft long in a short box truck. Seen him in the short but the truck sat like this for 15min or so with no one around.

Two guys were moving a bed. I guess chevy rust is trustworthy. Other guy followed behind in a tahoo. This was during rush hour. Next: When reese hitches give you two perfect holes for led lights on your lifted minivan (actually was a jeep grand Cherokee)

Well this project has kinda tooken a turn. Current progress of it. Most of the engine bay has been repainted so far. Nothing professional but mostly spray paint to clean it up. Wiring is mostly finshed up. Dash has also been put back in along with the first coat of paint on most of the sheet metal

Not my trailer but a uhaul. Had to haul our 2004 f150 yesterday and used our 2007 but couldn't have the trailer back in time so had to pay today's fee for it and needed to haul a truck to the scrap yard My brother had got called to work after school so i had 800lb in the bed of the pickup towing...

Everything is painted and installed. Next will be the back supports but this is plenty to have the truck back on the road tommorrow. Bumper will get pushed out 3/4in also but thats no big deal

Well got the front brackets fully welded up. My welding still aint that good so my dad went through and hit it hard. Then got some paint and got 3 layers put on to it. Then put some paint on to the push bar and some onto the truck itself. Also painted the outside tires black too (have had them...

Had my dad look at it and we decided that it would need more support incase of a heavy impact. Cut 1/4in plate 3.5in wide and then cut it into a "boot" also. Have to go through and weld everything up if it bolts up nicely. The adjustment plate has the holes cut on a angle for the push bar so...

Have been looking heavily for a rt3 mount for my 2000 f550 but only found one and didnt have money at the time. But i have inquired one off a chevy through a trade for so have to make it work Building it all out of spare materials for cost sake. Mostly 2x2.5x.25in and 2x2x.25in angle Sorry...

Just a thought for speed. My mini loader (custom built from a trencher) runs walking speed maybe. Complete pain in the @$$ if you have to go along a 1000ft driveway it takes along time. And you dont wanna be on it during the winter because its so slow and cold out I would love to be able to...

Didn't really read through the whole thread but just unloaded a 16ft box a few weeks ago. Anchored it to a big skidsteer and lifted one end then put pipes under it as rollers and backed up the skidsteer. Got to the end send set the rear down and moved the skidsteer to the front and lifted it and...

Soundguy. Is this what your talking about?? Sorry about the darkness. Battery too dead. Should have said but it's a select o speed tranny

Posting this here instead of ford forum just for fast answers. Got a ford 3000 that I'm trying to find the differential lock. Renters just bought it this weekend and it caught fire but I need to tow it in the shop to work on it (getting paid) but even in neutral and clutch the rear tires are...

Well I have done some looking for free diagrams and will keep looking but this is going to be more then just putting new wires on. Pic attached is looking down the oil fill I am trying to talk them into going to the local tractor junkyard and getting a wiring harness and possible other parts...

The people who lease part of our land just bought a ford 3000 and we're brushhogging and I guess that battery blew up and caused fire. Most likely I will be doing repair to it but was wondering if anyone had any knowledge and any wiring diagrams for this?? I will also be posting one thread...

saw this today. Door was rolled up and driving down the rd. Told him when we got next to him at a stop light. He kept going for as long as I could see in the mirror

I need help trying to find out what all requirements Michigan has for a truck to need dot numbers. Got told from a buddy that hauls rvs commercially that I wouldn't need any dot because it would be private interprise but can't find anything when I Google for requirements so I figured I'd throw...

Sounds like you want my 79 f150. Definitely one heck of a truck

Want to waterproof my mud truck and had to get a few different kinds of lubricants for work. You guys think pb blaster dry lube with Teflon would water proof?? I know I can get other stuff but I have this on hand why I ask.

Saeed this today. Idk if he did anything wrong but I would have pushed the lumber up on the utility box and stuck it over some of that space so it wouldnot hang out too far

I know this is out of category but you guys are about the most creative people ever. My grandma's and her bf chevy burned down and they lost the keys to their spare truck. Can't find their spare and other spare was put on with the main key cause it bent on the Chevy key chain and now it's all...

Another Larry the cable guy post

Talked to him and told me about the seals where I can get them. I thought it was treated cause the mini chopper I got on the same deal has stabilizer and gas was still good. It fired right up with a shot of staying fluid. I put more fuel in it too but the want enough to help out the old stuff.

Just a lil update on the truck. Played with it some more and have to have the semi alternator rebuild or buy a new one. That is the only thing now that can be holding the truck up. Hopefully can get it soon before the mud bogs start heavy. Plans is to build a few guards and 3in body lift to put...

This was the bottom part of the carb where the fuel filtration system was. Yea I don't think what's how it's supposed to look like. Put it back together and now it's leaking in one of the seals is leaking and it still won't start. So what's the crankshaft seal?? Is it a easy or hard replacement...

First thing. Ik this isn't a tractor but you guys are smart. Ok so got a gocart from a good family friend and it sat for half of this winter cause he was too busy(only reason why I took it) and can't get it to start. Had it to fire a tiny bit off staying fluid but still can't get it going...

Not hauling but I figured you guys would get a laugh. Credit to Lary the cable guy on his Facebook

15 turning 16 this summer. Did a lil mudding out back again with the jeeps again. Sunday

Yea you can still be too small. I'll hate to try what you did cause my max speed is walking

Well back at it with this mini loader. Now it's pallet forks. Have been needing some lately and will need them to move burn barrels. Moved first one with bucket but second one is a steel 55 gal stock tank with is wider then my 36 in bucket. So I started picking up parts around the farm...

Only thing is that the injectors may need replacement in another 100,000 or more miles. If they go out once they will again. But are good trucks. Just sold my 2005 with 427,000 and going strong besides main seal tranny to engine leaking and 3 transfer cases

Sorry typo. $13,000 We usually don't haul that much over 1,000lb. But total of tools, ladder racks, tool boxes, ladders gets up to a 1,000lb. Man oh man if I had pictures of a 99 150 we had. Big tool boxes on the side, and doing a hr drive every day packed up level with the tool boxes...

My dad is looking at trucks for work. He was looking at a ecodeisel which was a big horn edition for $52,000. They said that on average you save $2,500 a year on fuel so for him it would be around $5,000 which would pay for over half itself. He don't really want that fancy of a truck so that...

That's the scene around the farm. Big trailer to the left side, mud truck loaded with scrap, Raney got pushed out by had with a seat from a ext. can that won't fit, and the tractor and trailer with the new motor. If you look hard you can see the engine and tranny Still way in the air from the...

Well I have been on this project for about a month and have been forgetting to post it so here it is. Started out with a $200 2000 ranger off craigslist just cause it needed soft plugs. Had bought it for no reason besides it was cheap and I'll figure something to do with it. Then some friends...

Got pictures of one tire. That's about 2,000 miles on them. Have over 1/2in tread so far and we're complete beasts for snow plowing

Any body got any home remidies/tricks/cheats to fix a crack windshield. I'm trying the rubing alcohol,salt, and bug spray but haven't heard good from that. So what have you done. My windshield is so far cracked it won't hurt to try anything. And yes I know I should replace it and I probably...

Maybe these are mayor bit my upgrades will be curl, a bucket and a 12V conversion so I can actually charge the 12V battery

First truck was a ol 79 f150 straights 6 4 speed on the floor with granny. And a plow on front. Got when I was 12 as a fixer. Almost got it going Second is a 05 duramax with 427,000 on it and a plow. Now only need to get my license. Will be 16 in july and then taking the duramax up to the dunes...

Well pictures are now loading It sitting by the tractor getting ready for mock up All hinges on plow welded with stick welder Getting the mount for the tractor done and main pivot Finished product and tested with only 1-2in of snow

Just a few pictures from logging earlier this winter. Using a farmall h and Allis chalmers wd45

So I go to start my truck lately (currently it's just a farm truck) and every other day batteries are so dead that it won't roll over. We can't figure out what has been causing it. The batteries are only a few years old. Alternator less then 8 months. Truck has a front snow plow, salter and...

Well I already built a straight blade and also wanted a v-blade too. Started off with a 4ft craftsman and cut it down. Used everything from around the shop. Hinges ate made out of 3/4in black pipe and center pin was going to be 1/2 stainless rod but I might leave the 1/2in threaded rod just...

This actually sounds like a really great idea for the OP. I also say if this^^ I idea wouldn't work use a small tractor like a steiner, dingo. Here is my mini loader. It's kinda like a Steiner but from the sounds a Steiner is 4ft, but this one is smaller Ignore my over loading and...

Just got alot more done for welding done. Finally tried my turn at welding. Spent about 2hrs on the shop welding and grinding. Had to redo the curl mounts. I tried to use the old mounts on the plow but couldn't get the curl needed for lifting the plow more then 1ft let alone stacking 5ft. So...

My buddy asked me to sell his fuel tank for him. I'm needing a price range on it from you guys since I know nothing about them. Yes I know it's all depends on region, condition, pump, etc.... But I'm just seeing what you guys think. I'm getting more pictures tonight but here's some. And it...

Just found another post about you, well your tractors, not you in specific

We use pb or wd40 but prefer pb blaster for our high jackers. They have 2 shafts that slide together and if left in the rain or forced together without lube are a b***** you get part and for the winch and wheels on the forks Also more technical name "duct lifts"

Just saw this on my Facebook. Second in less then a year.

Just like the title says. Could a 241c tcase replace a 208c tcase?? This will be in a jeep with a Chevy 350 motor. Popular switch.

I know this should be in plowing but you guys know how to get truck parts. I'm looking for the truck side wiring harness for a boss rt2 v plow. Can't find anything on ebay so I figured try you guys. Any ideas where? ? Is going on a 99 F350 7.3

I think you need 2 pullers but you could do one like this Then could do 2 different Engadget systems like a mower deck where you pull a lever and it activated what you want. Then another for the other piece

Got they plow mounted and used it to level some dirt and some driveway work

The loader arm will go right where the washers are Frame made from uni-strut. Now just need add the supports I'm thinking for some casters to use the wheels off the bed frame

It's that time of the year. Snow plows. Just build one on my mini loader Used all scrap around the place Hauling the 3 garden tractor plows I had into the barn Bucket taken off and set on a furnace pallet Choose to use the old simpicity plow do to it having a A-frame. Grinder...

My Budd had this on his truck about 2 weeks ago The clip wouldn't fit through the hole

Just kinda curious about this. Is there skyway a thread for this? ? Couldn't find any. Or and advise you guys would give?? I'm not new to hydraulics bit not even close to a expert like some of you. I will be using them in the next year's to come more and more.

Not far enough (Not my tractor) they won't swing to the side far enough

Here's mine 05 duramax with a 7.5ft western and a 10ft western. Both run the western unimount 79 ford f150 with a V plow as back up or heavy snow And the little loader for possible stacking and cleaning around the house And a allis Chalmers wd45 with 6ft back blade as a 2nd back up

First thing. Not a big tractor or even a sub compact. Just bought this tractor a week ago or so. Have been having problems where the guy welded the tractor loader. It is where the loader drops down. This tractor was a custom from a trencher. Looks to be all good designs, but was only made for...

So I bought mini trencher that was striped to frame and turned into a mini loader. But I'll wondering what type of hydraulic system it runs This is how it goes - pump to 1# 2 spool valve but then the outlet side feeds to 2# 2 spool valve. Then the outlet from the 2# goes to the tank...

Been You need to start a build thread on that. I have a mini loader made from a trencher. How slow is your machine? ? Sorry about the hijack

Only thing that will get switched around here is coolant in the allis Chalmers wd45 and the farmall h. Need to drain gas out of the garden tractors and mowers. Then pin on the plow for the plow truck Then get the new tractor home

Kinda curious on this. Have seen most people recommend using tractors or only run tractors. I understand that not everyone has plow trucks. I personally like plowing with trucks. I actually got 1 plowing job and am a back up plowers for a busdy when he goes out of the country for Christmas and I...

Just got these a minute ago

Pictures of it

I got a offer to trade a lathe for a snowplow of mine. Total value of my stuff is around $1200-$1400. Am I getting a good deal? ? I have read and saw what you guys have some with lathes. Secondly can you guys give me some info on it. Haven't heard back yet. I might not be posting this in the...

Did you notice the block of wood on the hitch under the tailgate

This is what he is talking about Like the idea

I'm looking at a white 2-155 tractor. Hydraulic pump is bad. How hard are they to replace??? Can they still run and drive down the road??

This?? Tearing apart the light right now

It really won't wear your tires out unless you keep spinning them out every time you get a huge load. It could be cut down a but but I'm not cutting until the first season or it just won't work out to the point where I want to grind for hours

I'm setting up my duramax for plowing. I'm wanting to put lights on the headache rack. 2 pointing front, 2 pointing back. This truck will also be a farm truck. This is ebay I'm thinking...

This is the truck. And the fog light switch This is the little 7.5ft plow This is the 10ft plow. Yes it is heavy but not nothing more then 700-800lb maybe 850lb.

OK first thing first... I know this is probably the wrong category but you guys have lots of knowledge at what I need. I got a 05 2500 duramax for plowing. I'm going into the business. I am right now with the truck and 2 plows for it. I'm looking at putting a headache rack on with lights and...

I got a 05 2500 duramax. Got the plows but I'm going through and finishing the setup. I got a nice chrome headache rack that I'm going to try to put on I need help on the- What type of lights Way to turn the lights on What type of flasher to use And any other things you guys think I need Imo...

Is this the pin your talking about?? Its made to be used for spreaders choppers disks cultivators hay wagons balers rakes loaders 3pt pins. But back when we helped our old neighbor with hay if your hooked a wagon to a truck that's what you used

The Ford can't be over 7k. The duramax is about 9k with all tools in it and hooked to a 16ft landscape trailer My guess is that the Ford isnt more then 4k. It's only got a little straight six 4 speed but the shocks are actually bad

The old duramax needs some new shocks

After 3short but hard years my dad has finally decided to move back to our farm. Him and my mom got divorced and he left the place but kept it and she left last year trashed the place. Then we had a renter that stripped the house which was good but then left. We still don't know why. My family...

For a disk or cultivator. You could buy four garden tractor cultivators or disks like what i use Or you could do a combination of both. Disk in front and cultivator on back

Correct on tricycle but if it has good brakes that will counter the effect. I had a M with loader being a tricycle it actually did good in snow hauling hay but the usual no counter weight. My thoughts might be to take the cultivators off possibly snow plow and its probably going to end up I...

I'm wondering if anyone out there knows how good a farmall h with plow is. I just got one and it has a plow lift for it and i have a spare snow plow

Sounds like a good one. Although i don't know the economy for motor homes Another good deal Farmall H with cultivators and all new rubber $700

Just kinda bored and seeing who has their own rigs for mud bogs. Going to one with our 95Ford 150 about 6in rough country lift running some old school 33-35"tires. Not sure exact size but right around there. Yes this truck is a rare body style. Picked it up $850. Only put tires and a door on...

I'm looking to buy 2- 1"×36" or 48" hydraulic cylinders. These will be for a homemade loader that be estimated for about 500lb at the high side. Does anyone know where to get these on the cheap side. No luck on craigslist eBay and i couldn't find them on surplus center

Well i know allot of you advice upgrade the front end. But to me and my father (doing all the welding with 40+ years of tractor experience) we are not going to upgrade the front end. We ain't going to make this a huge loader. We know we will be lucky if it will not be able to handle thousands...

I'm looking to see if you can change your email on your acount?? Can you??

I'm looking to build a loader for a homelite/Jacobson garden tractor. Pto don't work right now. I want to use electric pump to run it. I really want to know how to do it 1- toggle switch to run pump then use regular hydraulic levers 2- i really want to do something like a plow controller and...

I got a homelite/Jacobson garden tractor that i am looking to build a loader. Anyone ever do this?? Could someone help me design one. I know the tradition design of a loader but could someone help me with attachment points Can get more/better pictures if needed

I know there might be a old post like this but haven't seen one in a while and i do allot of trading and buying and selling. Picked this up yesterday across the street from a job that i was working At. The whole truck load-push mower homelite/jacobson big garden tractor with old rusted out...

That's the tractor. Been running it with a back blade

I have posted once before but here it is again I must have it upside down

Yes i do have that style. Sorry about not positing earlier Can you explain what you mean a little more. I did the the shorter spark plug wire to the closer plug

Got the fly wheel cleaned up. But there is a wire running up from the motor by the oil dipstick. Any ideas that that could cause the problems??

Ok so my tranny acted up and wont work it wants to go but won't changed fluids and filter. Now it will go when cold but not after a min warming up. Any ideas??

My Briggs and Stratton 16hp twin cylinder industrial engine won't fire. I parked it last fall with a bad coil. Just replaced the coil the spark plugs and now it won't fire. It don't even act like it's firing. Any ideas??? Attached are the info for the motor

Looking for input on the Ford 6.4 diesel truck motors. I'm looking at a few with it

Got all the wiring done and put some rear lights on it to make it fancy. Need to get a new key, wrap the wires and hopefully can get the coil Monday

I have a farm king that i used last year And it quite toward and of the season so it got parked for winter. I had no choice but to plow it in along with another snow plow that was in front of it. So just finally got my inbition to get back to the project. Last year the charging system went bad...

The old ones Are the best

You will be perfectly fine how many acres you planting? Here is what i have and use garden tractors and a farmall C That's my little sister pretending she's driving the tractor. I can get a pic of my garden in the morning in wanted

I have a farmall C with the hydraulic block in middle. Haven't got it to work and added fluids. Any other ideas and how do you lubricate the control levers

Ok so i have seen this on craigslist lately and wonder what you guys think. Do you think the steering would work or not?? Case hydraulic drive transaxles, failed 4X4 articulated project Case hydraulic drive transaxles, failed 4X4 articulated project I didn't build this!!! Bought it sight...

Got allot more done. Back area is finished. Everything is coming up really good. Have got many rains every week. Haven't tilled in almost 2weeks so fired up the craftsman and got it done. After getting it stuck in the sand 5 times

So yesterday me and my dad were working and cops pulled in our neighbors drive and came to our house. My siblings (im 14) and my step Mon have no idea the were even there. We just got told from our neighbor(nicknamed "the old man") while we were unhooking a trailer just a little bit ago. Any...

I just got a craftsman lawn mower with a 4in lift and first thing i thought of is your grader And i thought about adding a blade to it

That's all the buildings but the is another about 7acres of field

Heavy tilled part is new

Got more work done to my garden. Lots. It's mostly planted. The garden is on my neighbors land and he wanted more soil plow up and i had just got my farmall C So i spend a few hrs Saturday morning in the garden. Will get more pictures today or tomorrow

Tell me about the madness. I'm almost 15and i already got a allis Chalmers wd45, a farmall C, a loader for the allis and 3pt. Then this spring i got a one bottom John Deere plow. On top of this i also own a 79ford plow truck and will be getting my dad's duramax when he gets a different truck

79 Ford F 150 won't start first of all I know this ain't a tractor but technically it's going to be getting used on farm in a farm truck but as replace a coil I have not been able to get the truck running yet I have replace the coil with a brand new one that got use a little bit this winter the...

79 Ford F 150 won't start first of all I know this ain't a tractor but technically it's going to be getting used on farm in a farm truck but as replace a coil on it the brain module the starter only thing I haven't replaced is a key switch I have checked all power I've got power going to my

I got a allis Chalmers wd45 with loader and 3-pt. I have the loader off and was using the tractor to plow my garden. Ran for about 5-6hrs with 2short brakes cause my a** was sore. Then hooked the tractor to a 6ft pull behind drag to cross drag my garden so I could level out the rows. About...

I got a allis Chalmers wd45 with loader and 3-pt. I have the loader off and was using the tractor to plow my garden. Ran for about 5-6hrs with 2short brakes cause my a** was sore. Then hooked the tractor to a 6ft pull behind drag to cross drag my garden so I could level out the rows. About...

Friday I went and bought a John Deere trailer trip plow. Deal of the week for$50 Me being only 14 I don't really like driving in high traffic areas with the tractor so my neighbor helped me which worked out great. I have my garden in his old horse pasture and he likes to be involved which...

Delco?? Like modal

Can do tomorrow. It's a combo. The generator/starter is good. What I need is a diagram to figure out the voltage regulator like the one I found and am going to try out

I need a wiring diagram for the engine/starting. tried to find one a while ago but it don't work. Any ideas?? Tractor is right around the 80s I would say

Been talking to my dad and best thing was to start cutting out the supports and twist the loader back then reweld the top support in. For cutting I used a cheapo harbor freight saw zaw

Looks like you are coming quite popular

Ok so I posted a few days ago about my 3pt on my ac wd45. I also have a loader on it that is bent. Back story on the loader was that the guy I bought it from told me a tree fell on the loader which bent there loader arm. I know that I could go buy a loader for $500-800 and modify the loader to...

Went to my farm to pick up my tractor. Fresh battery and a shoot if starting fluid just cause it sat all winter and fired right up The power of my hydraulics of my loader. And the forks were only ratchet strapped and chained to my arms of the loader

Last year I purchase my ac(Allis Chalmers) wd45. And the guy had a few parts tractors and one had a loader and a have duty homemade 3pt. Picked up the tractor for $800 3pt for I think $150 or $200

I was just kinda watching videos about homemade tractors (want to build one in the future) and found this video. I thought this guys video on his quick attach. What u guys think of it

I'm getting ready to turn my old trip bucket loader with no bucket at the moment into a hydraulic curl/? Bucket. I'm possibly trading one of my garden tractors for 2 12ft by 3/8 hose. Is parker 3000psi hosed good or not??? He told me it's top quality. And I'm also getting about 3ft 3/8 with 1/4...

I've seen a few posts on snow plow builds. Now i want to see what everyone else is doin for plowing/blowing. If someone can teach me how to upload pics on a phone I'll post my 79 f150 with a v blade

Some history on the truck and me Got a 79 Ford 150 ranger with a 4 sp creeper 6cylender 309. It has a meyer snow plow which has abeyond heavy duty v blade. I am 14 and got this truck spring of 13. It has been a huge project for me but i ain't afraid of a challenge. The box was gone. And the...

Hey guys, i bought a Allis Chalmers wd45 and I'm buying a trip loader off a tractor identical to it from the same person. It has all hydro for lifting/drop, but i want to add bucket tilt. I got a bunch of cylinders and controllers, but what its the best/cheaper way to run lines along the...

this is my first post and ive been intersted in building a compact tractor for a while. i am looking for some pics, insperstion, and posible a blue print/ step by step. thanks in advace everyone, and yes im a horrible speller :P:licking: