Search results

I have a 2022 MT 357 with 190 hrs. I was driving across town to mow some property and I notice the right front tire moving in and out from front of tire to back of tire. It was very subtle, not a violent wiggle or shimmy and could not be felt in the steering wheel. The left side was also moving...

Does anyone have the cross reference number for MT 3 series. Looking for wix number. I searched through the filter thread and on line but still couldn’t come up with one I am certain on. Thanks

I was recently mowing then moving from one property to another and without warning heard a pop and the forward pedal went completely to the floor. Tractor stopped immediately. Crawled underneath to find one end of the hst linkage was broken off. I got a neighbor to pull me back to my building...

Has anyone ever had the amber light on the AC push button slow flash? Last fall the original compressor failed and the dealer replaced it a few weeks ago. After running the AC for a while every so often the amber light will slowly blink for a while. Air seems to remain cold. Nothing in the book...

Has anyone replaced the battery on their XR yet? Curious if you went through LS or replaced with an aftermarket. The size appears to be critical due to how its mounted. Thanks.

For those with equipment or flat bed trailers that have treated wood decks what is the best coating you have found that holds up the longest? I've used a couple different brands but it doesn't seem to last too long. I know the sun and weather is hard on the deck. I finally can get mine out of...

I had an hydraulic line that comes from the pump fail due to it rubbing on the engine block. I had a new one made at my local NAPA. On my model it was located on the right side. Comes out of the pump and runs up to the fire wall behind the top of the engine. I had to remove the hood and the hood...

Does anyone know a ball park price for the LS Backhoe attachment for the 4000 series? If you own one are you happy with it and does it perform as you expected. Thanks in advance for any feed back.

As I approach my 500 hr. service as recommended per LS to change the hydraulic fluid (11.4 gallons) I checked into changing with Amsoil synthetic hydro fluid. I was shocked when 15 gallons with tax was over $720.00. Needless to say I'm not going that route. I'm sure it's a great fluid and am not...

I noticed my right side round break light has a crack in it. Doesn't look like anything hit it more like it may have got hot and became brittle. I was looking to order a replacement online. The lamp part # is 40261649. The LS parts site (Sundowner) is not very good imo. I entered the part number...

Many post a certain feature they would like to see on their tractor. I recently read a indicator light when the 4 wheel drive is engaged, a clock not on the stereo, etc. I would like to see a little larger fuel tank. Even though the tractor is fairly easy on fuel it would be nice to not have to...

http://https://nkleadershipwatch.wordpress.com/2016/05/14/kim-jong-un-visits-machinery-and-equipment-exhibition/

Fuel tank filler neck split for no apparent reason. Dealer has new tank ordered. I took a couple pics then rapped electrical tape around neck to keep debris out.

Does anyone know if the round red brake lights are a sealed unit or does it take a bulb? I haven't got a chance to look in the on line parts schematic yet. Thought maybe someone has replaced one and might know. I noticed right side out when parking brake is set. Not sure yet but it doesn't look...

I recently bought a used 6' TSC rotary mower. Almost new condition. Guy only used it about 20hrs mowing down grass a couple times for a new home. It probably wouldn't be my first choice but I couldn't pass it up for 1/2 price. I'm only cutting pasture grass and very few small saplings so I...

I finished some mowing this morning and was stopped putting some concrete in the bucket when my wife walked over before she left for work. She found a bolt in the grass which appeared new and clean and definitely off my tractor. Metric with flat washer and lock washer. Looked like the same as...

I was moving gravel today and noticed the inside front right tire was wet with oil. Appears the seal let go and puked out all the oil. Going to the dealer Monday or Tuesday. I saw another thread where a 7010 had a wheel bearing go out and lost all the oil. Hopefully not a lot of down time.

I installed 4 new LED work lights. What a huge difference. I stayed with the oval design to look like factory. They are 1350 lumens each. I got them from Surplus Center for around $225 for all 4 shipped. The brand is Buyers which makes some very nice products.

I found a used 8ft Bush Hog blade series 90. Some of the info I came up with shows the weight at approx. 740 lbs. I was really looking at the 7ft. figuring that would be plenty wide. Like the idea of the extra weight for better cutting in some of our hard soil. My question is do you think this...

Has anyone found a NAPA or after market cross reference number for the fuel pre-filter? I don't think I saw one listed in the filter thread. Thanks.

I posted this over in the Husqvarna forum but didn't get any response. Without buying Husqvarna orange spray paint does anyone know what color would be the closest match? AC orange, Kubota, New Kubota, Case orange? These colors are readily available. I have a Husqvarna rider I'm going to sell...

Getting ready to do my 50hr. service. Curious on what weight and brand oil others are using. Thanks.

Without buying Husky orange spray paint which color is a close match? AC Orange, Kubota, Case, New Kubota Orange?

A while back I was attempting to grease the FEL zerks that are recessed. I thought I was never going to get the grease gun off. I actually had to unscrew the end and took a small screw driver to get it to release. Anyone else have trouble with this? I looked at getting a Lock N Lube end for gun...

Any cab owners have any issue with their windshield wiper motor? I was using it a few times while pushing snow. I noticed it was stopped on the left hand side of the glass. I got out and moved the arm and it made a few passes then quit again. It makes a few cycles if you move the arm but won't...

You northeast guys all fueled up and got your blades and blowers on?

How much pressure are you running in your rear tires? I don't have any fluid yet but I noticed the tread or bars on rear tires are not fully contacting the ground. R4 industrial tires. I would think you would want the entire tread making contact. Thanks.

Having some issues on insuring my tractor. My insurance agent who we've had for 30 years said my home owners insurance company only want's to insure it for $10,000. He told them that was crazy because the tractor was valued at almost 3 times that amount. He's working with other companies but not...

Hey guys. Today I was pushing some snow with my XR4046hc. I put an Express Steel 7ft snow box on it. Very nice quality. At one point I noticed a red indicator in lower left corner of dash display. Looked like a circle with and exclamation point in it. It went off on it's own and never came on...

I read a couple threads on the cab radio speakers. I agree the sound is not good. I'm planning on replacing them with some better quality speakers. It sounds like the best approach is to take the cab top off. If you have replaced yours can you expand on how you went about it and if there is...

There is a switch on the dash on the right side above the throttle. What is this for? Momentary rocker with same symbol top and bottom. Bottom has a slash line through it. Forgot to mention the dealer forgot to give me the operators manual before I left the dealership so he is going to send it...

Hello, just signed up. This looks like the place to go for great advise. Recently took delivery of new XR4046HC. I'll be posting a few questions soon and getting my profile finished. Just wanted to stop in.