Search results

G'day all long time since I have been here, I am just wondering if anyone has a copy of a workshop manual that they would be willing to share with me, or know of a reputable site I can download it from? Cheers and thanks in advance JD

Hi all I am looking for a list of fault codes for a 6310 I have one here that I have got the codes out of but do not have a list of what they mean. The fault that I have is that the reverser lever won't stay engaged it will drive if you hold it in gear but as soon as you let it go it goes back...

G'day all as the title suggests I am chasing an electrical diagram for a 2294 Case/IH I have downloaded 2 manuals and they have both been the I&T manuals and they don't give you the wiring, I have a tractor here with clutch/ trans issues in that it wont move and have pulled the control box from...

G'day all I have a 4235 here and it is giving me a code 62 on the power shuttle that relates to road speed sensor, the prob I have is the only speed sensor I can find in the parts book relates to a radar speed sensor on the rear axle housing and it is not fitted to this tractor, can anyone tell...

G'day all I have a 4235 in the shop now and am having some electrical probs with it and was wondering if anyone had a wiring diagram for it mainly the dash and charging circuit, I have a problem with no display on the dash or no tacho working it has had the alternator replaced recently and I am...

G'day all I have an Isuzu DA220 engine in the workshop at the moment for a rebuild and am having trouble finding any specs on the engine and was wondering if anyone out there had a shop manual for one? I know they were used in some forklifts and loaders but info seems to be a bit scarce on the...

G'day all have my brothers 920 here doing some work on it and was trying to find if the roller timing was right as it has a new idler gear and pin to fit anyhow was looking online to see if I could find the info and no such luck, however I did find info on a 925 and was looking through it and...

G'day all I have a MF 4270 in at work at the moment with the 24x24 shuttle shift trans with an intermittent fault and was wondering if anyone out there has had experience with these:). The problem is that the tractor will not drive sometimes:confused:. Sometimes it is fine others no go at all...

Hey all I have to fit a new seal on the pto shaft on a 5088 and was wondering if I have to remove the whole assy or can I just pop it out from the back and fit a new one?? Thanks Jon

G'day all I have had a little L2202DT brought into the workshop for water in the oil :( not a problem BUT the owner wants a quote and knowing the likely chance of these little 3 cyl having a cracked head I want to find out if, 1 I can get a head ( not a lot of support for grey imports here...

G'day all as the title suggests can anyone point me in the right direction for a operators manual download ( for free if possible:D:D). My brother has one and no manual and I want to change the oils on it Thanks in advance Jon

G'day all I have had a job come in to the shop and as the title suggests it is a cabbed 3140 with the three point linkage stuck right up in position. I have not had a look at it yet and prob won't get to til tomorrow so I thought I would throw it out to the JD guru's here and see if someone...

G'day all I have a versatile 256 in the shop at the moment and have to rebuild the PTO assy, I am fitting new clutches and brgs and was wondering if anyone out there had a workshop manual for one so it makes it a bit easier to set up rather than going by feel. Cheers Jon

G'day all as the title suggests does anyone know what the relief setting for an M6800 Kubota should be?? Jon

Hey guys hope this works https://www.facebook.com/video/video.php?v=589377124407943 Sacrifices to the cropping gods:drink: Only in Aus Jon

G'day all just had a couple of interesting ones in the workshop this week that I thought I might share it may help others out 1st a TM 125 with Pto not working went down to the property with a spare EMU and Pto switch (usual culprits) checked switch and found to be out of specs so plugged in...

G'day all I have a 13.5 hp Tecumseh engine in a ride on mower and the internal flywheel magnets have come adrift :censored:. I had stuck them in with 'super glue' and refitted it but found out that did not work:censored:x2. Has anyone out there fixed this problem and how?? My prob being as well...

G'day all I am chasing the head tensions and valve clearances for a Fiat/Hesston 115-90 if anyone has got them handy:) Thanks in advance Jon

G'day all I am chasing a workshop manual for an International 1086 to be sent over to me. I have looked on flea bay and the only company that has genuine manuals will not ship o/seas:(. I already have an I&T man from years ago but was looking for something a bit more comprehensive. Does anyone...

G'day all I am looking for a set of metric taps and dies, now my local snap on man is trying to flog me his stuff at a price well that is a little high for what i will need it for ( Close to $600 aus:( ). I am a professional mech and do not mind spending good money on my tools but a quick search...

G'day had a TS 110 in to work today with a hemmorage above the front of the trans somewhere oil everywhere:(:(. After stripping out the floor and floor plate found the feed pipe to the steering valve had rubbed through on the corner of trans:mad:, the culprit was a cheap plastic hose bridge with...

G'day as you have probably heard about Qld is suffering from the worst floods in history, many of you will also be aware that we have alot of aussies on this site ( me being one too:thumbsup:). I am lucky as i live in the southern states but i would like to wish them all the best and send them...

G'day does anyone know of the vavle clearances for a NH TL100A??? Thanks in advance Jon

G'day guys just wondering if anyone out there in knowledge land can tell me the valve clearances of the above . Thanks in advance:thumbsup: Jon

G'day all i have an international 507 loader over here which is a rebadged komatsu does anyone know where i might get an owners manual for it i have googled it and am unable to find anything about it:confused:. Even if we can convert it to komatsu. Thanks in advance Jon

G'day i have recently got a MF30-13 and i am looking for the decal for the dash MF part # 3920919M, i know these were a simplicity mower but i do not know the simplicity # or if they were the same , my local massey dealer tell me that the part has been discontinued however when he checked a...