Search results

If I remember right these can be warifin resistant. An Amish friend of mine had rats in his hog barn - bad. He tried all sorts of poisons but nothing would fix it. Then he went out one morning and a skunk had been in the barn. The rats left after that.

I built mine with treated round posts put in to 42" deep - the frost line here in Michigan. No concrete just some pea gravel at the bottom and then packing the dirt as I fill the hole. The boards are 1 x 6 x 16 long ash which I stagger the ends on. Fence has been in 7 years now and is used for...

Get a good air blower and blow out your radiator while your at it. If you havent done it in awhile - or not at all you might be surprised how much dust and chaff a radiator can hold preventing air from the fan from being able to pass trough the radiator.

I've done 12" on center and had the inspector require it on a 12 foot tall wall. You might get away with less. I went the extra mile on mine and know its solid

If he is doing stud walls instead of post construction and those walls will be supporting free span trusses 2 foot on center - 2x6 walls on 12' center is not out of line especially since he mentioned 10' walls. Thats a bit of weight

we use a small chain harrow for ours. It can be pulled behind a zero turn or a four wheeler

Looks very nice

3/8 is a good all around size. I've had 5/16ths and it doesn't take much to stretch it. The 3/8 is a bit clumsier but is almost always up to the job

It goes back to "they say". They say allotta things and if you live long enough youll see them flip flop on some things

I live in a barndominium and the previous poster is right about getting free span trusses. They cost a bit more (heavier build) and will probably have to be run on 2 foot centers. You mentioned 2 x 4 walls - those trusses will be a load to carry - 6x6 posts every 8 feet with double 2 x 12...

With a layer of visqueen underneath it might be. It is amazing how much moisture can surface on concrete especially when it warms up - even with a layer of visqueen

Fencing and grazing this would be way more profitable in the long run. Hogging this with a 4 foot brush hog is gonna take forever

If you do find a source of a manual make sure they dont offer 2 different manuals. An operators manual - which offers limited info on servicing the tractor and focuses on the operation of the machine - and a service manual which tells you how to work on the tractor in detail

No - Guinness IS better in Ireland and it comes in pints over there

Someone came to one of my auctions some years back and bought a farmall. They had a trailer similar to this and tilted it back and drove the tractor right up on it. When he drove it far enough on it tilted back to the flat position and his friend latched it into place. It looked dangerous...

I HATE special parts - tools - etc

Used motor oil use it on the flat racks and the trailer. Do it on a warm sunny day in direct sunlight. If you have to do every few years it only costs you the time to apply it.

He once starred at the sun with a pair of binoculars for over an hour

Well, I did

OK thats right but the difference in handling is like night and day

The new 1/2 ton trucks are weak and poor load haulers, they are known as grocery getters for a reason. Aint it the truth

If you have too much weight behind the axles it can - more than likely will - cause you to lose control swerving all over the road. I had one about 30 years ago with the axles in the middle and it did that to me with a heavy load on. I talked with several of my friends who said there was too...

Might need a filter change - start with the simple easy stuff first

Resistors / arresters - also called check valves - definitely a must. One downside to using propane or map gas is that the preheat time for torch cutting is noticeably longer. And though you may not ever need to weld with the torch its good to have options. Whichever you decide go with be safe...

I have a 7 ft Woods land plane that I used to level mounds of dirt pulled off the edge of the pond (to put a shoulder on the edge instead of a drop off) and some of those mounds were 3 feet high. My tractor is 50 hp and weighs about 4500. It did an excellent job leveling the mounds. And they are...

Not necessarily - some kids that age have been raised with culture and are aware of these older types of music and movies because of the miracle of re-runs

Definitely mow or brush hog it first. You could disc it then and get decent results. I use a chain harrow on mine after discing. It is like giant chain link 1/2'' material with 2'' points that rough up the ground. Its about 8 foot wide and 12 feet long and mounted to a three point frame so that...

What he said. Just about anything mechanical needs lubrication from time to time

Shes still the girl for me

It does seem small - usually they're 2 x 8s. Then again i've seen worse,, you probably have too

"The Kioti manual tells you NO fuel additives". What about anti gel in the winter?

My initials and a phone number that I just cant seem to forget

Every four feet is a good rule but the purlins in this building are set on edge and appear to be 2x6s so that you can space the trusses farther apart. Ive seen it both ways and both are tried and tested - boils down to preference I spose. The trusses on the other hand look like they used way...

OIL Based kilz is best

Like Clint said - A mans got to know his limitations

A little often is better than allot once in a while - I can think of a few other things that are that way too

Safety glasses are cheap and more comfortable to wear now than they ever have been. Only problem for me is they fog up on me sometimes. But I still use them

Our ash has gone the way of our Elm trees - hardly any of them now. The elms stood for a long time after dying and were much safer to cut down. These ash on the other hand rot at the base and tend to fall down sooner and rot quicker. It pays to be careful and be a bit of a sissy when working on...

Might have to get it from a dealer. Last time I needed one like this it was $120 from the JD dealer

I've spent a good amount of time outside year around for decades - the weather here in Michigan is anything but typical this year. I studied weather and know how to look for signs of rain and fair weather without any media - dont watch TV. Somehow the idea of being lumped in with "the masses"...

It seems the weather is all over the place here in America this year. We (Michigan) started out very dry this spring - dry enough where the first cutting yield was less than normal. July was unusually wet and cooler affecting drying times and produce (vegetables) was behind a good three weeks...

Careful not to lump us all in the same boat. my vehicle is a 2010 chevy truck and I think its ridiculous the way prices are. But to criticize a Realtor for getting good money for a listing - thats what were paid to do,,,. If the appraisal says its worth it based on the market I dont see how we...

These forms are required in any real property transaction whether a real estate agent is involved or not. Its a state law and is in place to protect buyers and sellers of real property. I sell real estate in Michigan

No - when people buy they sign the form as an acknowledgement that they are aware of farming in the area. This is proof that they knew going in that the property is near farm operations that include noise dust odors etc. This law is to keep people from shutting down farms over natural effects of...

No - that would fall under township ordinance. I had a neighbor playing obscene rap "music" while my grandson and I were working on our fence. When I went to talk to him bout it he went ballistic and said nothing was going to change. I thought we might be able to reach an agreement without...

Under Michigan disclosure law it is required for the owner of a property that is within vicinity of farm operations to disclose this on the seller disclosure form - which the buyer of the property (the new neighbors) are required to sign. It serves as their acknowledgement that the property may...

WD seems to work pretty well. I used to use PB Blaster but think the WD is as good. If something is stuck that bad I generally use a blue flame ratchet to get it loose

Those 6 liters were bullet proof - many go past 300,000 miles. My 2010 has 276,000 and still has power. Hard on gas sometimes but the payment is right

Mines 4800 lbs with the front loader- I use 3/8 chains and ratchet binders

Still a valuable instrument. We had a digital height gage when I worked at the shop and people were constantly borrowing it. I requested a new one but with the vernier scale. Problem solved

You might know this you might not. To convert a fraction to a decimal you divide the numerator (top number) by the denominator ( bottom number) Ex - 3/4 3 divided by 4 = .75 Also to find half of a fraction you double the denominator Ex half of 3/4 is 3/8 half of 3/8 is 3/16 half of 3/16 is...

I bought a Woods GSM84P land plane in 2020 for $1800 and I see they cost about $500 more now. Good tool that weighs just over 700 pounds. I used it to level dirt that was dug off of the pond edges so that there was a shoulder instead of a drop off. There was a fair amount of dirt to move but it...

I use an 8 footer to cut my hay - similar result to what a sickle bar mower would do. These are fast but are heavy. My John deere is over 50 horse but when you have the disc in the upright (transport) position you want to take off slow or youll pull the front wheels off the ground. I see some...

Same here in Michigan dry dry dry

If they get that big they are eating their share of mice and such. Ive seen different color variations of these with some of them having a red tint

"It only took a decade" - no one will accuse you of running right out and buying the first thing you looked at. Those hours will taper off after the novelty wears off a bit. Ive seen folks use their new tractors to haul trash bags to the road or even get their mail

Blue flame ratchet is the way to go. Why are you sharpening the blades though?

Im just gonna say it - we dont need no stinking lectric mowers!

When I was working construction I noticed that now and then a strong looking fella would show up wanting to work on our crew and, as we would work through the day he would usually run out of gas well before the day was out. Most of us were of average build but hardened up to work. That has to...

I spose - but doesnt the tractor make a pretty good winch by itself?

V bar chains work well. mine are heavy and a pain to put on but make all the difference on an icy slope

Silver solder is perfect for high pressure lines. I used to solder hundreds of stainless lines into junction blocks. The trick is to have the steel clean and not to get it too hot where it scorches (turns black). If you do scorch it let it cool down and clean the steel with emery cloth or a wire...

TSC carries the County line brand. I got one new for $600 with a nine inch auger. I've set lots of post and have more yet to set. As old and tired says they are a bit of a pain to put on - a stand of some sort would make the job easier but they save allotta work

" I decided to do what the pro's do and rented a mini ex. The reach and lift ability are far superior to a CUT backhoe and the whole operation can be done from the same seat. " There you have it folks - living proof that a man can love a machine. Ive used one of these for picking up rocks and...

#2 as well. Especially if you haven't hauled larger things - there's always a learning curve and it usually translates into more money spent. Just talking from a few miserable experiences

Remember the old saying about a bird in the hand?

Consider rebuilding it verses replacing it. They wanted $650 for a rebuilt one at the JD dealership - not that Id go there unless I had to - but the rebuild kit was only $53.

This is what we are taught and have been taught for years in our continuing education classes. But - just because its law doesnt mean a judge wont decide differently. That part needs to change otherwise someone can legally steal land

Well that brings up a good question - who paid the property taxes all those years? In Michigan the law says that the people had to aggressively use or occupy the property AND also pay the taxes. That doesnt mean a judge will render in favor of what the law says though. It seems more and more...

Redwing blackbirds are a sign. I heard two of them today

If the tires are filled that can account for some movement at high speeds

Ive set hundreds of posts with and without an auger. We never use concrete or foam. Just pack the dirt or maybe pea gravel in the hole first (bottom 6" or so) then pack the dirt. Use a dirt packer - 5 foot 3/4" steel rod with a 3" round steel cookie welded to the packing end. It will firm up...

Worms gotta eat same as buzzards - Jose Wales

I drive down our road (gravel) in transport gear. But you gotta watch out as sometimes those chunks will come flying right at you

Its a privilege denied many

Do the hook in the middle of the bucket as well as the ends. Put a plate of steel on the bucket instead of welding directly to the bucket- this will spread out the stress. Lifting heavier things - or trying to with the side hooks could rack the loader frame if you aren't careful. Get a 3 point...

And at times like this I'm grateful for my old truck

I refuse to let them "pinch "me and speed up when they are trying to

I saw many of them in Ireland - but they drive on the other side of the road there. There I was shifting with the left hand and steering with the right and then came up to a round about. That will test your skill as a driver. The round abouts seem to work very efficiently there

I use a Krone 8ft disc mower to cut our hay. These things are FAST! It was $11000 new but I was spending as much time working on my HN haybine as I was actually cutting. To get a discbine (with the rollers) is quite a bit more $ and I reasoned that my Amish neighbors dont have a conditioner...

The Rolling Stones - Angie - when I first heard this I thought he was saying "I aint Jed". The Beverly Hillbillies were on in those days so it just fit

And - as Mr Haney would say - its GUARANTEED! not to rust,,

Our mud was starting to dry out few days ago but it snowed and thankfully our mud is nice and sticky again

I put new beams and cross members on this Oliver 5003 3 ton running gear. I stretched it out 1 foot as well. The one front zerk would not take grease and the front end was really stiff. I tried one of those gadgets you fill with oil and then drive the oil into the zerk but it wouldnt work. So I...

I never set posts in concrete. I auger out the hole then clean out the excess with a hand post hole digger. Set the post in and tamp the dirt in with a steel tamper (this is just a piece of 3/4' round stock 5' long with a 2"round 1/2" thick steel cookie welded to one end) until the dirt is...

Tcreeley has a good point. I have used utility poles and railroad ties for corner posts for years now with good results. You cant buy a treated post today that will last as well - no doubt the ones that lasted better were bad for the environment or something. That's not to say i don't use modern...

I bought one of these diggers last year and dug many holes with it. I dig at an idle and it seems to work pretty good. Dug hundreds by hand over the years so this is a treat to have

As the name of the thread implies I am looking for recommendations for an older tractor for running a round baler. Something along the lines of an IH 886 or MH 185. Looking for machines with a dependable reputation. Open to suggestions. Thanks in advance.

I forgot - some of these folks might not know Mr Kimball.

This has no doubt been discussed before but, I'm looking for suggestions on what to do to recondition my pastures. They are hilly on the one side and the other (low) side tends to hold water. There is a small ditch that leads to a tile but sometimes the water takes its time. The pastures are...

Some time ago I noticed quite a bit of slop in the left side steering knuckle on my JD 5205. There is a 1/2 " grade 8 bolt that is supposed to help keep the knuckle tight. I tightened it and it broke before it even started to close the gap in the knuckle. So I took it off ( yes I marked it...

I bought a used brush hog Saturday and took it out and used it on a about a five acre field out back that was overgrown and had saplings growing on it as well. It worked pretty good but I noticed that the wheel on the back didn't really roll but more or less dragged sideways much of the time...